1998 Acura CL recalls

There are 5 safety recalls on record for the 1998 Acura CL, covering 3,162,543 vehicles in total across all the models in each campaign. Newest first.

All recalls

Air bags: frontal: driver side: inflator moduleReported January 17, 2020 · 1,439,841 vehicles affected

What is wrong: Honda (American Honda Motor Co.) is recalling certain 1998 Acura 2.2CL, 1998-1999 Acura 2.3CL, 1998-1999 Acura 3.0CL, 2001 Acura 3.2CL and Acura MDX, 1998-2000 Honda Accord Coupe, Accord Sedan, Civic Sedan, Odyssey and Acura 3.5RL, 1999-2000 Acura 3.2TL, 1996-2000 Civic Coupe, 1997-2000 CR-V, 1997-1998 EV Plus, and 1998-1999 Isuzu Oasis vehicles. These vehicles were equipped with Non-Azide Driver air bag Inflators (NADI) and do not contain phase stabilized ammonium nitrate (PSAN) propellant. Due to a manufacturing issue, the NADI inflators may absorb moisture, causing the inflators to rupture or the air bag cushion to underinflate.
Risk: In the event of a crash necessitating air bag deployment, an inflator rupture may result in metal fragments striking the driver or other occupants. An underinflated air bag cushion may not properly protect the occupant. These scenarios increase the risk of serious injury or death.
Remedy: Honda will notify owners, and dealers will inspect the driver frontal air bag inflator, and replace it if necessary, with an inflator of a different design, free of charge. The recall began October 1, 2020. Owners may contact American Honda's Customer Support & Campaign Center at 1‑888‑234‑2138 or Isuzu customer service at 1‑800‑255‑6727.

Recall number 20V026000 · Recall details

Electrical system: ignition: switchReported October 27, 2003 · 563,861 vehicles affected

What is wrong: On certain passenger vehicles and mini vans, the ignition switch may wear excessively and prevent proper interlock operation, making it possible to turn the ignition key to the "off" position and remove the key without shifting the transmission to "park."
Risk: If the vehicle operator does not shift to "park" before removing the key and fails to engage the parking brake, the vehicle could roll and a crash could occur.
Remedy: Dealers will perform an inspection procedure that determines the amount of cylinder body wear. If significant wear is indicated, the dealer will replace the cylinder body, collar, and latch plate. If no signs of wear are indicated, dealers will replace the latch plate with a redesigned part. Owner notification began december 8, 2003. Owners should contact honda at 1‑800‑999‑1009 or acura at 1‑800‑382‑2238.

Recall number 03V423000 · Recall details

Electrical system: ignition: switchReported May 16, 2002 · 1,000,000 vehicles affected

What is wrong: On certain sedans, coupes, hatchbacks, and sport utility vehicles, electrical contacts in the ignition switch can degrade due to the high electrical current passing through the switch when the vehicle is started.
Risk: Worn contacts could cause the engine to stall without warning, increasing the risk of a crash.
Remedy: Dealers will replace the ignition switch. Owner notification began june 14, 2002. Owners who take their vehicles to an authorized dealer on an agreed upon service date and do not receive the free remedy within a reasonable time should contact honda at 1‑800‑999‑1009 or acura at 1‑800‑382‑2238.

Recall number 02V120000 · Recall details

Suspension: front: control arm: lower ball jointReported May 10, 1999 · 124,875 vehicles affected

What is wrong: Vehicle description: passenger vehicles. Certain vehicles were manufactured with ball joints that can prematurely wear out and, in the worse case, the ball joint would separate causing the front suspension to collapse.
Risk: This condition would result in vehicle deceleration and a sudden loss of power. Also steering controllability would be reduced.
Remedy: Dealers will replace the front suspension lower ball joints.

Recall number 99V069000 · Recall details

Power train: automatic transmission: park/neutral start interlock switchReported February 10, 1998 · 33,966 vehicles affected

What is wrong: Vehicle description: passenger vehicles (honda accord sedans manufactured from september 18, 1997 to january 10, 1998; coupes manufactured december 11, december 15, 1997, and january 5, 1998; acura 2.3cl manufactured october 22, 1997 through january 7, 1998). During manufacturing, the casting die caused an irregularity in the right-side transmission cover. This irregularity can limit the movement of the parking pawl actuation level and prevent adequate engagement of the parking gear pawl. This does not comply with fmvs no. 114, "theft protection."
Risk: This condition can cause the vehicle to roll down an incline when the transmission is locked in "park," increasing the risk of personal injury and/or property damage.
Remedy: Dealers will install a collar on the transmission parking pawl to ensure proper movement of the actuation lever.

Recall number 98V018000 · Recall details

Questions about the 1998 Acura CL recalls

How do I check if my 1998 Acura CL has an open recall?

Enter your VIN in the VIN decoder on this page to see the recalls for your exact model and year, then confirm with any dealer of the brand or the manufacturer, who can tell you whether the repair was already done on your car.

Do I have to pay for a recall repair?

No. Safety recall repairs are free at any authorized dealer of the brand, even if the car is out of warranty or you are not the first owner.

How many recalls does the 1998 Acura CL have?

5, covering air bags, electrical system and suspension.

VIN decoder

See the problems and recalls for an exact car

Buying a used 1998 Acura CL?

Check the exact car before you pay: accidents, salvage or flood titles, odometer readings and previous owners.

Check its history