Altec AT37-G recalls

What is wrong

Altec Industries, Inc. (Altec) is recalling certain model year 2010-2013 AT200A, AT235, AT235P, AT30-G, AT35-G, AT37-G, AT40-G and AT237 Aerial Devices mounted on Ford Super Duty Chassis' equipped with 6.8L gas engines and Muncie FR67 power take offs (PTO). In the affected vehicles, oil may leak from the PTO pressure switch onto a thermal blanket covering the exhaust.

Risk

Oil leaking onto the thermal blanket combined with heat from exhaust may result in an increased risk of fire.

Remedy

Altec will notify owners, and dealers will replace the affected pressure switch and thermal blanket with the kit identified by Muncie, free of charge. The recall began on December 9, 2013. Consumerr's may contact Altec at 1‑877‑462‑5832. Altec's recall number is CSN 583.

Recall number 13V458000 · Recall details

What is wrong

Altec Industries, Inc. is recalling certain model year 2010-2012 AT200A, AT235/235P, AT237, AT248F, AT35/37-G, and AT40-G aerial devices built on Ford F550 chassis with a gross vehicle weight rating of 19,500lbs. The battery cable going to the unit auxiliary functions could be damaged and possibly short to ground.

Risk

If the battery cable shorts to ground, it may overheat, resulting in a fire.

Remedy

Altec began notifying affected owners on April 24, 2013. Dealers will re-route the auxiliary function battery cables. Owners may contact Altec at 1‑800‑860‑0183. Altec's recall number is CSN 565.

Recall number 13V224000 · Recall details

What is wrong

Altec Industries, Inc. is recalling certain model year 2012 Aerial Device vehicles built on a Navistar Terrastar chassis because the Altec-installed torsion bar increases the ride height of the front suspension, which when the vehicle hits bumps, may cause the vehicle to alter its steering direction.

Risk

As the vehicle hits bumps, it may deviate from the intended line of travel, increasing the risk of a crash.

Remedy

Altec will notify owners, and will install an updated bracket and spring kit, free of charge. The safety recall began on August 27, 2012. Owners may contact Altec Industries at 1‑877‑462‑5832.

Recall number 12V390000 · Recall details

What is wrong

Altec is recalling certain at35-g, at37-g, at235, and at237 aerial devices manufactured from january 2005 through october 2008. These units are equipped with billet steel counterweight that is welded in place. In the event of weld failure, the counterweight may fall out while travelling.

Risk

If these steel pieces fall in the path of the vehicle or other traffic, a vehicle crash involving death or serious injury may result.

Remedy

Altec has developed kits to improve the attachment of the billet steel counterweights. Customers at their option may perform the repair or have a dealer install the kit free of charge. The safety recall is expected to begin during april 2011. Owners may contact altec at 1‑877‑462‑5832.

Recall number 11V197000 · Recall details

What is wrong

Altec is recalling certain model year 1998-2008 aerial devices vehicles built from january 1998 through may 2008. The glue bond joint in the insulating arm link may fail over time. The connection is also secured by eight bolts, but with the loss of the glue bond, the fasteners could fatigue over time and fail.

Risk

Failure of the glue bond and fasteners could result in separation of the fiberglass link from the steel inserts. As a result, the platform on which a service technician would stand could fail during use resulting in death or serious injury.

Remedy

Altec will provide instructions on how to inspect the fiberglass insulating link and fasteners. This service will be performed free of charge. The safety recall began on december 1, 2010. Owners may contact altec at 1‑877‑462‑5832.

Recall number 10V598000 · Recall details