2000 Audi A4 technical service bulletins
101 technical service bulletins and manufacturer communications cover the 2000 Audi A4.
Bulletins tell dealers how to fix known problems. A warranty extension means the manufacturer pays for that repair for longer.
- This bulletin provides information on the additional reporting requirements for safety related inquiries.
- This informational bulletin explains how to order replacement VIN plates, Safety Certification Labels, etc.
- This information bulletin contains instructions for technicans on how to ensure their TAC call goes smoothly.
- This communication is issued to inform dealers of updated shipping regulations related to lithium ion...
- This communication is issued to remind dealers of the repair validation process for repair group 19....
- This bulletin contains instructions for additional reporting requirements for safety related inquiries...
- This informational bulletin contains technical information for when there is condensation visible on the...
- This special notice is to inform dealers to return all part numbers listed in the document and order the...
- This informational bulletin contains all the the Audi Oil Quality Standards that should be used when doing...
- This informational bulletin contains instructions for sychronizing the remote key after the battery has...
- Due to increasing requests for high voltage personal protective equipment (HVE PPE) for dealer technicians...
- This information TSB provides information regarding the correct way to torque adjust a wheel bolt.
- VIN plate and/or B-Pillar Safety Certification label requires replacement.
- The fuel tank has been removed from the vehicle and must be neutralized before shipment or disposal
- Vehicle will not communicate with diagnostic scan tool or emissions test equipment
- Discontinuation and mixing of Audi-approved engine coolants
- Discontinuation and mixing of Audi-approved engine coolants
- Audi: engine, on some vehicles, would run irregularly or have malfunction indicator lamp (MIL) on or...
- Sporadic fault memory entries are stored in various control modules
- Condensation is visible on the inside of the headlight, taillight, fog light, side marker light, front...
- The following message appears on the MMI display: "Device or cable type not supported". The AMI cable...
- Prior to engine replacement, any debris lodged in transferred assemblies must be removed
- The use of contaminated gasoline or gasoline with a low content of deposit control additives may result in...
- This bulletin lists engine oils that meet Audi oil quality standards (VW 501 01, 502 00, 505 00, 505 01,...
- Noises and inconsistent engine operation after cold start during the catalyst heating phase
- High quality media files (video and sound) are now integrated into technical service bulletins on a...
- High quality media files (video and sound) are now integrated into technical service bulletins on a...
- This is an advance notice for Audi of America employees
- Tightening wheel bolts
- Wheel bolt requires torque adjustment.
- Technician preparation when calling the Audi Technical Assistance Center (TAC).
- Due to new Minnesota state regulations regarding biofuels, biodiesel blends of B5 or less may not be...
- Idenifying and mixing factory fill engine coolants
- Discontinuation and mixing of Audi-approved engine coolants
- Technical bulletins and updates
- ElsaPro Software update and technical bulletins
- Automatic transmission fluid is leaking at the sump pan gasket
- As the sump pan gasket settles, the torque of the bolts decreases and the seal may leak
- ATF pan leaks
- Vehicle lacks power or will not move after stop due to simultaneous depressing of the brake and...
- Customer states that the engine returns to idle speed of approximately 1,400 RPM although the accelerator...
- This condition may be caused when the brake pedal and the accelerator pedal are depressed simultaneously
- Google Maps Street View (NVLW))
- Audi: on certain vehicles, use calibrated torque wrench and not torque sticks, torque extension bars and...
- Wheel bolt requires torque adjustment
- Cigarette lighter element will not lock into the lighter socket -U1- to begin the heating process, or the...
- Audi Elsa Newsletter
- Prior to engine replacement, any debris lodged in transferred assemblies must be removed
- If the vehicle?s engine experienced a serious mechanical problem, it is possible that small pieces of...
- This document contains information on the Audi side assist update.
- Excessive accumulation of deposits on intake valves, intake manifold, fuel injectors and combustion chambers
- The use of contaminated gasoline or gasoline with a low content of deposit control additives may result in...
- Discontinuation and mixing of Audi-approved engine coolants
- Discontinuation and mixing of Audi-approved engine coolants.
- Audi: some vehicles may lack power or will not move after stop due to simultaneously depressing the brake...
- This condition may be caused when the brake pedal and the accelerator pedal are depressed simultaneously
- This TSB contains information on technician preparation when calling the Audi Technical Assistance Center
- Discontinuation and mixing of Audi-approved engine coolants
- Central locking via remote control does not work either sporadically or permanently
- Central locking via remote control does not work either sporadically or permanently
- Engine oils that meet Audi Oil Quality Standards.
- Condensation is visible on the inside of the headlight, taillight, fog light, side marker light, front...
- Oil consumption measurement
- Oil consumption measurement
- Audi: wheel bolts require torque adjustment
- Audi: ABS activates during light brake application
- Audi: the internal engine damage resulting from a broken timing belt
- Audi service campaign: internal engine damage resulting from a broken timing belt
- Audi service campaign: csc letter was received for audi model years 2000-2003 A4 and tt
- Engine oil pressure too low - engine flush
- Engine oil pressure too low - engine flush
- Headlight aiming, using hella universal beamsetter
- Loses power or will not move after stop
- Exterior lights, mositure accumulation.
- Oil sludge limited warranty extension
- Repairs of oil sludge related problems
- Engine oil specifications, oil capacity, oil filter
- Update programming for catalytic converter system (IC)
- Three way catalyst, catalytic efficiency diagnostic trouble codes (DTCS) stored in DTC memory
- Coolant leak at oil cooler hoses
- Check/replace replace front suspension lower control arms
- Service action je campaign-check/replace front suspension lower control arms
- Long term fuel trim - system too rich
- Valve cover, diagnosing oil leakage from gaskets
- Oil sludge - warranty extension
- Engine oil specifications, oil capacity, oil filter
- Low engine oil pressure light is on
- Warranty extension covering certain oil sludge related repairs
- Throttle valve control module - J338-, will not adapt
- Zf vh recall of the zf steering pump, supplied to wd's for replacement of the audi A4 passat p/n 8D0 145...
- A condition may exist where the engine cranks but will not start
- A condition may exist where the engine may crank but will not start
- This technical repair manual contains the electrical wiring diagrams, troubleshooting and complent locations
VIN decoder
See the problems and recalls for an exact car
Buying a used 2000 Audi A4?
Check the exact car before you pay: accidents, salvage or flood titles, odometer readings and previous owners.
Check its history