Buell M2 Cyclone recalls
There are 10 safety recalls on record for the Buell M2 Cyclone, covering 66,961 vehicles in total across all the models in each campaign. Newest first.
Buell M2 Cyclone recalls by model year
All recalls
Suspension: rear
- What is wrong
- Vehicle description: motorcycles. The rear shock absorber can break, dragging the underside of the vehicle on the ground.
- Risk
- This could affect the handling, increasing the risk of a crash.
- Remedy
- Dealers will install a shock reinforcement package (srp) which protects the structual integrity of the suspension system. A new shock absorber is currently being developed. When the new shock absorber is available, if an owner choses, they can have it installed at no charge through the dealer network.
Recall number 00V163000 · Recall details
Engine and engine cooling: engine
- What is wrong
- Vehicle description: motorcycles. These motorcycles were manufactured with an incorrect air cleaner component.
- Risk
- This component could restrict air flow into the float bowl of the carburetor, causing fuel to overflow, which could result in a fire. This could also prevent sufficient fuel flow, which could cause the engine to misfire or stall.
- Remedy
- Dealers will inspect the float bowl vent assembly for proper venting and correct this condition if necessary.
Recall number 99V140000 · Recall details
Suspension: rear: shock absorber
- What is wrong
- Vehicle description: motorcycles. These motorcycles were built with a rear shock absorber front eye that could break.
- Risk
- If the shock eye should break, the underside of the vehicle will drag on the ground possibly causing loss of vehicle control.
- Remedy
- Dealers will replace the rear shock absorber.
Recall number 99V107000 · Recall details
Suspension: rear
- What is wrong
- Vehicle description: motorcycles. These motorcycles were built with a swingarm that could break.
- Risk
- If the swingarm should break, loss of vehicle control could occur.
- Remedy
- Dealers will replace the swingarm.
Recall number 99V106000 · Recall details
Fuel system, gasoline: storage: tank assembly
- What is wrong
- Vehicle description: motorcycles. These motorcycles were built with a fuel tank vent valve assembly that could become plugged.
- Risk
- Under certain conditions, this could cause the carburetor to overflow fuel which could result in a fire. This condition could also prevent sufficient fuel flow, which could cause the engine to misfire or stall.
- Remedy
- Dealers will replace the fuel tank vent valve assembly.
Recall number 99V105000 · Recall details
Fuel system, gasoline: storage: tank assembly: mounting
- What is wrong
- Vehicle description: motorcycles. These motorcycles were built with a fuel tank mount system that could, in the event of a crash, allow the fuel tank to separate from the motorcycle.
- Risk
- This could result in an explosion or fire.
- Remedy
- Dealers will replace the fuel tank mount system.
Recall number 99V104000 · Recall details
Unknown or other
- What is wrong
- Vehicle description: motorcycles. These motorcycles were built with a sidestand switch that could become inoperative
- Risk
- This condition can cause the engine to stall/quit when riding.
- Remedy
- Dealers will replace the sidestand switch.
Recall number 99V097000 · Recall details
Suspension: front
- What is wrong
- Vehicle description: motorcycles. The front isolator mount system can lose clamp load and possibly break.
- Risk
- This could lead to an unintended distraction to the driver, increasing the risk of a crash.
- Remedy
- Dealers will replace the front isolator mount system.
Recall number 99V086000 · Recall details
Service brakes, hydraulic
- What is wrong
- Vehicle description: motorcycles. The e-clip which retains the drive pin on the front brake rotor and carrier can separate from the drive pin allowing the pin to move out of position and come in contact with the front brake caliper.
- Risk
- This condition can prevent the front wheel from rotating increasing the risk of a vehicle crash.
- Remedy
- Dealers will repair these motorcycles.
Recall number 97V153000 · Recall details
Service brakes, hydraulic
- What is wrong
- The front brake line hose can kink during front brake action.
- Risk
- This condition can impede the return brake fluid flow and prohibit the immediate release of the front brake caliper pistons increasing the risk of a vehicle crash.
- Remedy
- Dealers will inspect and readjust the front brake line guide.
Recall number 97V022000 · Recall details
Questions about the Buell M2 Cyclone recalls
How do I check if my Buell M2 Cyclone has an open recall?
Enter your VIN in the VIN decoder on this page to see the recalls for your exact model and year, then confirm with any dealer of the brand or the manufacturer, who can tell you whether the repair was already done on your car.
Do I have to pay for a recall repair?
No. Safety recall repairs are free at any authorized dealer of the brand, even if the car is out of warranty or you are not the first owner.
How many recalls does the Buell M2 Cyclone have?
10, covering suspension, engine and engine cooling and fuel system, gasoline.
VIN decoder
See the problems and recalls for an exact car
Buying a used Buell M2 Cyclone?
Check the exact car before you pay: accidents, salvage or flood titles, odometer readings and previous owners.
Check its history