Caterpillar CT660 recalls

There are 5 safety recalls on record for the Caterpillar CT660, covering 395 vehicles in total across all the models in each campaign. Newest first.

Caterpillar CT660 recalls by model year

2016 1 2015 1 2014 1 2013 2 2012 3

All recalls

Steering: linkages: tie rod assemblyReported October 11, 2017 · 4 vehicles affected

What is wrong: Caterpillar Inc. (Caterpillar) is recalling all 2016 Navistar CT660S trucks equipped with certain Spicer D or E series steer axles. The castellated nut on the steer axles may not be properly torqued, allowing the tie rod to loosen.
Risk: If the tie rod loosens, it may disconnect from the steering knuckle, causing a complete loss of steering and increasing the risk of a crash.
Remedy: Caterpillar will notify owners, and dealers will tighten the castellated nut and tie rod, replacing them as necessary, free of charge. The recall began on December 08, 2017. Owners may contact Caterpillar customer service at 1‑800‑447‑4986.

Recall number 17V641000 · Recall details

Parking brake: conventional: airReported December 23, 2014 · 57 vehicles affected

What is wrong: Caterpillar Inc. (Caterpillar) is recalling certain model year 2015 CT660, and CT681 trucks manufactured July 28, 2014, to November 5, 2014. The affected vehicles may experience brake drag due to an improperly seated diaphragm in the brake chamber.
Risk: Brake drag may result in a wheel end fire.
Remedy: Caterpillar will notify owners, and dealers will replace the brake actuators, free of charge. An interim letter was mailed to owners on March 18, 2015. A second notice will be mailed once parts become available. Owners may contact Caterpillar customer service at 1‑309‑675‑5658.

Recall number 14V814000 · Recall details

Service brakesReported February 20, 2014 · 181 vehicles affected

What is wrong: Caterpillar Inc. (Caterpillar) is recalling certain model year 2012-2013 CT660 trucks manufactured August 2011 through August 2012, and equipped with feature code 0504501, 0504504, or 04EWM Reduced Stopping Distance (RSD) brake linings and with or without feature code 04WCS Greased For Life front air S-cam brakes. In the affected vehicles, the brake S-cam brackets may fracture.
Risk: S-cam bracket fractures may result in an inoperative brake on the affected wheel. This will cause the vehicle to pull to one side unexpectedly during braking and/or increase the stopping distance. Either result may increase the risk of a crash.
Remedy: Caterpillar will notify owners, and dealers will replace the S-cam brake assemblies with a brake assembly with cast spiders and S-cam tube bracket assemblies with reinforced gussets, free of charge. The recall began on April 11, 2014. Owners may contact Caterpillar at 1‑888‑614‑4328.

Recall number 14V068000 · Recall details

Exterior lightingReported March 12, 2013 · 49 vehicles affected

What is wrong: Caterpillar is recalling certain 2012 and 2014 Caterpillar CT660 heavy duty trucks manufactured by Navistar between October 31, 2011, and January 23, 2013. Certain side marker lamps and/or reflective tape were not applied to these vehicles, which have a length of 30 feet or longer. Thus, these vehicles fail to conform to the requirements of Federal Motor Vehicle Safety Standard No. 108, "Lamps, Reflective Devices, and Associated Equipment."
Risk: Missing side marker lamps and/or reflective tape reduces the visibility of the truck to others, which increases the risk of a vehicle crash.
Remedy: Caterpillar will notify owners, and dealers will repair the vehicles free of charge. The recall began on April 262013. Owners may contact Caterpillar at 1‑800‑447‑4986.

Recall number 13V072000 · Recall details

Service brakes, air: supply: check valveReported February 13, 2012 · 104 vehicles affected

What is wrong: Caterpillar is recalling certain model year 2012-2013 ct660 commercial trucks, manufactured from december 2, 2010, through january 26, 2012, and equipped with bendix atr-6 traction relay valves. In extremely cold conditions, these bendix relay valves may potentially develop internal leakage. Internal leakage can lead to air pressure being delivered to affected primary or secondary brake causing continuous brake application.
Risk: Unexpected continuous brake application can cause the brakes to overheat and lead to a fire. Unexpected continuous brake application can cause the driver to lose control of the vehicle, increasing the risk of a crash. Also, the brakes may be applied without illuminating the brake lights, failing to give proper warning to other drivers.
Remedy: Caterpillar will notify owners, and dealers will repair the vehicles free of charge. Owners may contact caterpillar at 309‑675‑5658.

Recall number 12V051000 · Recall details

Questions about the Caterpillar CT660 recalls

How do I check if my Caterpillar CT660 has an open recall?

Enter your VIN in the VIN decoder on this page to see the recalls for your exact model and year, then confirm with any dealer of the brand or the manufacturer, who can tell you whether the repair was already done on your car.

Do I have to pay for a recall repair?

No. Safety recall repairs are free at any authorized dealer of the brand, even if the car is out of warranty or you are not the first owner.

How many recalls does the Caterpillar CT660 have?

5, covering steering, parking brake and service brakes.

VIN decoder

See the problems and recalls for an exact car

Buying a used Caterpillar CT660?

Check the exact car before you pay: accidents, salvage or flood titles, odometer readings and previous owners.

Check its history