I have a 2010 Chrysler 300 and when I fill my tank up I take the handle out when it clicks I don’t keep filling because I know not to. My car will smell like someone poured gas into my backseat and if I roll the driver side window down for air it seems to get stronger for a little over 3 months now until it gets a quarter in a half below full. Now I don’t fill my car up all the way due to that and no one has figured it out yet. I have replaced lines and caps and now the fuel pump to find out none of it was the problem. I was followed home tonight to be told my car was pouring out gas from under the fuel pump area while I was driving. So I took a video of it pouring out under the driver back seat area and then I pulled off the back seat to find gas all on top of my brand new fuel pump. First I figured maybe the seal wasn’t on right but everything was put on correctly but yet I have no clue why there is gas everywhere especially seeing the pump is in correct. I can’t drive my car nor take my grandson anywhere with my car smelling like gas. Not understanding why my old and new fuel pump is backing up and I wouldn’t run my car on empty nor overfill. I have spent a bit of money into my car replacing things to continue to have the same problem. Major issue scared to ride in my car not knowing if it is going to catch on fire and that is my main transportation. By the way I changed my fuel pump because my car wouldn’t start yesterday and I didn’t hear the fuel pump turning on so tapped it a few times and it clicked on and it was whining so loud I parked it a few blocks away at a family members house scared to be stuck on the side of the road going home yesterday. Seatbelt lock box quit working as well I literally have to push it in 50 times to get it to click very irritating especially if you are in a hurry but that is way minor compared to my gas issue for the last few months Wish I could share video to show gas pouring out can’t see in pictures
Chrysler 300 seat belt problems
24 of the 4,930 owner complaints about the Chrysler 300 describe seat belt won't latch or retract, most of them for the 2007 model year.
- owner complaints
- 24
- worst model year
- 2007
- typical mileage
- 100,000
By model year
- 20211
- 20181
- 20171
- 20161
- 20132
- 20122
- 20111
- 20101
- 20081
- 20079
- 20054
Often reported together
Airbag light 2Won't start 1Whining noise 1Transmission failure 1Stalling 1Fuel pump 1Fire or smoke 1ABS 1
What owners say
I have had zero accidents, am the original owner. Airbag light has come on. Seatbelt harness and buckle im told by my dealer needs to be completely replaced
Chrysler 300 2021 Vehicle keeps stalling, turning off while driving or if stopped at light or stop sign to loan just shuts random times and not Al way but enough to be dangerous when it stalls on freeway or in traffic Seat belt Driver seat belt just broke, split in half- safety issue. They replaced it but the metal seems to cut the seat belt and it probably will happen again Safety recall on Takata airbag, after replaced-air conditioning stopped working very concerning
The contact owns a 2018 Chrysler 300. The contact stated that while driving at an undisclosed speed, the contact became aware that the air bag warning light was illuminated. The vehicle was taken to the dealer, where it was diagnosed that the seat belt module had failed and needed to be replaced. The vehicle was repaired; however, the failure recurred. The dealer was contacted. The vehicle was not diagnosed or repaired. The manufacturer was made aware of the failure and referred the contact to the federal safety agency Hotline for further assistance. The approximate failure mileage was 115,000.
The contact owns a 2007 Chrysler 300. The contact stated while driving at an undisclosed speed and completing a turn, the contact observed that her grandson’s car seat had turned over on its side, prompting her to pull over to the shoulder of the roadway. The contact secured the car seat and became aware that the rear passenger’s seat belts failed to remain secure in the seat belt buckle. There was no warning light illuminated. The vehicle was not taken to the dealer nor an independent mechanic. The vehicle was not repaired. The manufacturer was not notified of the failure. The failure mileage was unknown.
Seatbelts have failed, malfunctioned on separate occasions throughout the years. Inspection of my vehicle is welcome for study on the seatbelts. On arrival to destinations, seatbelt or seatbelts will lock, and unable to release from the the button-press mechanism. Myself or passenger will then need to climb out of the belt from the bottom or top of restraint. Another note for safety hazards is the struggle to get back into the contraption isn’t time worthy- traveling from destinations sitting over top of seatbelts is an issue- a life or death situation. As there has not been physical altercations yet- I am concerned of the seatbelts locking and the mechanism button to unleash seatbelts fail, putting safety at risk for all passengers. The vehicle typically passes inspection, as for the malfunctions don’t happen while being inspected. There are no warnings whatsoever as to when the button click mechanism spontaneously locks into place.
I was in a front end collision with a tree. Everyone kept asking me about air bags deploying. They did not none. I thought nothing much of it until I realized why people were asking. I questioned the adjusted , he stated they should have deployed they should have deployed from the impact position. Well none did. And something about the seat belt locking or didnt lock. . My first real accident I dont know my h. However I did find out there is a issue. Now I'm on the questioning side of why didnt they deploy.
Tl* the contact owned a 2007 chrysler 300. The contact stated that while her daughter was driving about 30 MPH during rain weather conditions, another vehicle ran the stop sign and crashed head on into the vehicle, causing the driver then to crash the front of the vehicle into a tree. None of the air bags deployed. There was no warning. The seat belt failed to retract causing the driver to come in contact with the steering wheel. A police report was filed. The driver sustained bruised ribs, seat belt burn from the shoulder to lower part of the stomach, and some bruises on the face and back. The driver was taken to the emergency center in an ambulance. The vehicle was totaled and was towed to a tow yard. The contact called the emc auto sales dealer (919‑263‑1750, located at 10121 capital blvd #105, wake forest, nc 27587) and was told to call the manufacturer. The manufacturer was not made aware of the failure. The contact had no information about the other vehicle. The failure mileage was approximately 120,000. *dt
While the car is still. Seat belt is stuck and will not release. The air pressure symbol stays on. We have to climb out of the drivers side seatbelt.
Drivers side seat belt does not lock when you put it on. It just stopped working.
Related recalls
Seat belts: front
- What is wrong
- On certain passenger vehicles, the front shoulder belt adjustable turning loop (atl) bolts may not have been properly tightened.
- Risk
- This could cause shoulder belt separation in certain crash conditions, which can increase the risk of injury to front seat occupants.
- Remedy
- Dealers will tighten the shoulder belt adjuster turning loop bolts to the proper specification. Owner notification began on july 6, 2004. Owners should contact daimlerchrysler at 1‑800‑853‑1403.
Recall number 04V335000 · Recall details
Seat belts: rear/other
- What is wrong
- On certain passenger vehicles, a spot welding operation for the rear floorpan reinforcement may not have been performed.
- Risk
- This could cause the rear seat belt anchors and/or the child seat anchors to separate in certain crash conditions, which can increase the risk of injury to rear seat passengers.
- Remedy
- Dealers will inspect the rear floorpan reinforcement for missing welds and install structural rivets if necessary. Owner notification began on july 6, 2004. Owners should contact daimlerchrysler at 1‑800‑853‑1403.
Recall number 04V333000 · Recall details
Questions about the Chrysler 300 seat belt
Which Chrysler 300 years have seat belt won't latch or retract problems?
The model years with the most reports are 2007 (9 complaints), 2005 (4 complaints) and 2012 (2 complaints).
VIN decoder
See the problems and recalls for an exact car
Buying a used Chrysler 300?
Check the exact car before you pay: accidents, salvage or flood titles, odometer readings and previous owners.
Check its history