1993 chrysler fifth avenue has a problem with the brakes. *nj the consumer was informed there was a recall on the ABS, however the vehicle identification number was not included in the recall. The consumer paid for the repair work. However, one month later the brakes failed and the ABS light illuminated. One month after that, the brakes failed again, the dealer made the repair, but it didn't last. The brakes failed again, but before the consumer could get to the dealer, they started working again. Finally, after the fourth time of the brakes failing, the consumer was told a dual pressure switch was stuck on off and a new switch was needed.
Chrysler Fifth Avenue brake failure problems
15 of the 128 owner complaints about the Chrysler Fifth Avenue describe brake failure, most of them for the 1990 model year.
- owner complaints
- 15
- worst model year
- 1990
Is there a fix? There is 1 recall for this area of the car. See below
By model year
- 19934
- 19923
- 19912
- 19906
Often reported together
What owners say
On 9/25/2008 I brought my car to the chrysler place in warner robins, ga because the ABS brakes went out. I was informed there was a recall on those brakes. I was charged $498.66 for what was under warranty. On 10/23/2009 I brought my car back because the brakes went out again. The service person stated that I needed some other things replaced but they would work within the warranty. On 11/06/2008 I brought the car back because the brakes went out again. I brought the car back may 25, 2009 because the brakes went out again. I was informed that I would have to replace the dual pressure switch which was locked in the off position and was not covered under the warranty. The service person informed me that before they could check the warranty replacements, I would have to replace that switch which cost $513. I paid almost $500 for a warranty replacement and now I have to pay over $500 to see whether or not the warranty replacements are working. I placed not only my life but the life of others on the road in danger when I drive not knowing when the brakes will stop working. How is it that they get them to work for a while and then they stop working? I realized that my car is old and it was old when I purchased it. I was not aware of the ABS recall when I bought the car. I do not understand all the mechanical language as to what needs to be replaced and what is covered under the lifetime warranty. All I want is the brakes fixed or provide a safe car until they can fix it. I do not have $500 nor can I risk my life driving that vehicle to warner robins without brakes. I took 4 chances already in an effort to get the brakes fixed. I can't fight anymore. Not only am I putting my life at risk but the lives of other motorist. I have been given the run around not only by the dealership but others who keep sending me to everybody who can't or refuse to assist me. My car is old but it is all I have. I need a vehicle in this rural area with a sick mother who I care for. Please help.
Abs: anti-lock brake light always come on, chrysler said no problem. Abs brake failed, pedal goes to the floor and hit a car. Paid chrysler $780.75 to replace antilock brake controller. Brake light comes on again, brake pedal goes to floor and chrysler wants to repair the car for $2400 to change ABS system. Informed chrysler about the recall regarding ABS system unit defect, but denied request because they said part number is different. Car is inoperative since december 17, 2004.
Total brake failure occurred after the ABS warning light lit up on the dashboard.
When driving vehicle at 3mph there were no brakes. A mechanic said that ABS pump needed to be replaced. Please provide any further infomation.
Brakes failed three times.
Anti-lock brake failure.
Anti-lock brake failure. Recalled later, wants to be reimbursed for repairs.
Antilock brakes failed three times, causing brake pedal to fade.
While driving, applied ABS brakes and the brake pedal went all the way to the floor, and the vehicle would not stop.
Related recalls
Service brakes, hydraulic: foundation components: disc: caliper
- What is wrong
- Front disc brake caliper guide pin bolts may not have been adequately torqued and could loosen.
- Risk
- This could cause reduced braking effectiveness and couldresult in an accident.
- Remedy
- Properly torque front brake caliper guide pin bolts to 250 pounds.
Recall number 90V162000 · Recall details
Questions about the Chrysler Fifth Avenue brake failure
Which Chrysler Fifth Avenue years have brake failure problems?
The model years with the most reports are 1990 (6 complaints), 1993 (4 complaints) and 1992 (3 complaints).
VIN decoder
See the problems and recalls for an exact car
Buying a used Chrysler Fifth Avenue?
Check the exact car before you pay: accidents, salvage or flood titles, odometer readings and previous owners.
Check its history