My ABS light comes on and off I have replaced my wheels rotors and pads assuming that it was my brakes that did not solve the problem and seems like my brakes worked fine but @times I would get like a scrubbing noise seem to be coming from the front wheels well brakes are great. And was told to take my car to a chrysler dealership because the machine they had would not diagnose the code,well after that I new I would be into spending some money when I came to the dealership,I think this can be a dangerous situation if ever it came to a stop and would nt be able to .I think there should be a recall on the ABS wheel sensors and the module control will never purchase another chrysler in this lifetime very un satisfied consumer this is a serious concern especially some one who has children they are @risk this problem needs to be rectified before as soon as possible someone could end up in a serious accident and I have seen enough of the same problems resulting in the purchase of the chrysler pacifica and problems such as this deters me away from purchasing american vehicles such as chrysler.
2005 Chrysler Pacifica brakes complaints
Page 3 of 4: complaints 41 to 70 of 82, newest first, as owners wrote them.
I was just leaving out of the gas station, went to put on brakes and ABS light came on at the same time I put on brakes and felt like a grinding against something. Took car to shop put new brakes on, but didn't resolve the problem. Took car back to the shop because the ABS light came back on. Brakes sill having the same problem. I have had this problem checked out 3 times,and they cannot find and problem,but there is something going on with the brake pedal, in it or surrounding it. I have a 2005 chrysler pacifica, and I think it might be concerning the chrysler recall concerning the brake booster rod retaining clip. The brake failure occurs 2 to 3 time month. I thought putting on new brakes would solve the problem,but its coming from somewhere around the brake pedal not the brakes. Had it checked out again nothing was found wrong with brakes. Mechanic said nothing was found loose or missing.
Within about 3 months of purchasing my 2005 chrysler pacifica my ABS light started coming on. Now it comes on and stays on. After inquiring about the problem from several shops I have been told it is a very costly fix ranging from 1000-2000 dollars. I am afraid that this problem could result in brake failure at some point and cause a wreck. Chrysler needs to recall this part and fix the many who are complaining about it.
The ABS light keeps coming on and the last time the brakes got very spongy. I have been doing some research on this problem and have found that this is very common in this vehicle. To me that should be a safety re-call. The brakes I would think are a very important part if not the most important part of the vehicle. Does someone have to be killed before they are forced to do a re-call?
Making a left hand turn, I lost braking power momentarily. After that, the ABS light came on, but went off after the car was turned off. It comes on and off now intermittently and I on occasion lose braking ability. The ABS light does not seem to come on in correspondence with the braking issue however. I am told that this is due to faulty ABS sensors which chrysler refuses to acknowledge.
I purchased a used 2005 chrysler pacifica with 68000 miles on it. A week later the ABS light came on. I was told it was the sensor but it was ok to drive. My brakes do not brake well and lock up on me. I got the pads replaced and rotors smoothed, but I am still having the sensor problem. While looking on websites, I noticed that many people have the same problem. What can be done to force chrysler to recall this sensor?
We own a 2005 chrysler pacifica touring edition. About 3 months after we bought it (and the warranty ended), we noticed that the ABS light would come on. Sometimes it would stay on continuously, sometimes it would come off and on. When the light is on, and you press on the brake, the pedal begins to shake a little, and it's very hard to push and you hear a grinding noise. The car does not stop quickly at all, it just slows down a tiny bit. I've had more than 2 instances where I pressed the brake rather firmly and it didn't slow down enough and I didn't stop until I was in the middle of an intersection. I had both of my children with me at the time as well!! We took it to chrysler where they told us it would cost us roughly $80 an hour for them to figure out what was wrong. We just don't have that kind of money right now. The problem still happens frequently, but there's nothing we can do about it. From the research I have done on this problem, it is a very large problem with the pacificas. I've seen thousands of complaints online for this exact issue. Please put a recall on it, so that those of us who can't afford $80 an hour can make sure our children are safe on the roads. I'm afraid to even drive my kids to school for fear that the brakes will completely go out. Thank you so much!
Tl*the contact owns a 2005 chrysler pacifica. The contact stated that the ABS light illuminated a few months after the vehicle was purchased in october of 2008. In addition, the brakes were experiencing issues. The vehicle was taken back to the dealer and they stated that there was nothing wrong. The brakes continued to perform abnormally and produced a whistling sound. The brakes also pulsated and made a grinding noise as if they would lock up. The vehicle was taken to a repair shop and the mechanic stated that the pads were fine; however, the dealer installed cheap brake pads on the vehicle. The ABS light illuminates intermittently and the contact must pump the brake pedal in order to stop the vehicle. The brakes were repaired and the noises stopped; however, the ABS light still illuminates. The failure mileage was 49,000 and current mileage was 73,400.
The ABS (anti brake system) light started to come on and stay on I brought the car to the garage for repair the light still comes on I have made some research on the internet concerning that problem and discover that a lot of owner having the same type of car as me (2005 & up chrysler pacifica) are having the same problem. Also one time when the ABS light was on and stayed on while I was driving the ABS system cause me to loose brakes for a few seconds when I was trying to brake, this is a serious safety failure and chrysler should address that.
2005 chrysler pacifica. Abs failure/ABS light comes on, lose braking ability unless brakes are pumped. This issue was reported to chrysler a few weeks ago. Wheel sensors replaced. This issue is ongoing. Now back at chrysler dealership. Related to this is the engine surges and almost rear ended someone in the kfc drive thru same day I brought back to dealer.
In october 2008 I purchased a 2005 chrysler pacifica and I have been having alot braking issues since. The ABS light is constantly going on and off and the brake pedal felt bumpy and non-responsive at times. This is dangerous!!!! I have 8 week old twins. I went on the internet to find alot of people are having the same problems. I have yet to go to the dealer with this but after the holiday weekend I will but the ABS systems in these cars should be recalled before people get hurt or lose their lives.
At approximately 48,000 miles the ABS light came on. It eventually went off but then the brakes failed. The pedal went all the way to the floor before the car came grinding to a halt. The ABS light now goes on and off and the brake pedal goes all the way to the floor at least once a day. After researching the problem and speaking to a mechanic, I found that the sensors had failed. It is a frequent occurrence among other 2005-2006 chrysler pacifica owners I've come into contact with across the internet.
2005 chrysler pacifica, started having problems at 50,000 miles. Abs sensors had to be replaced and recall for fuel module...but most upsetting the car stalls at low speeds or while making turns..ie: pulling into parking spaces,etc.. I have brought it to dealership and like many others without engine light on they cannot duplicate problem, therefore we are sent on our way with no fix!! I have 4 children and I am terrified to drive this car!! Why wont chrysler stand behind these vehicles!!!
My 2005 chrysler pacifica has an ABS warning light that comes on and off, I went to midas and they told me there was a recall related to this, I went to dealership and they said only a technical advisory was issued saying to change all the brake sensors if one fails--this would cost me about $500--which I don't have. The dealership said I would still have brakes but the ABS system would not work so I would be more likely to skid. This doesn't sound safe to me--I went on line and found multiple sites stating this is a problem with chrysler pacificas--so why won't chrysler pay to have it fixed, and if they don't volunteer why doesn't someone in our government make them? Help! I haul kids around all day in my pacifica and I want them ( and me) to be safe.
I began having a problem about 2 months ago with my ABS light coming on. It would come on and turn off randomly. Recently the light came on permanently and my brakes began grinding. We took it to the dealer and were told that the ABS sensor is bad. Not only that, but the motor mounts cracked and must be replaced. My vehicle is only 3 years old, and has 47000 miles on it. After doing some research, I have found that both of these issues are a common problem on this make and model vehicle. The dealer that we purchased it from admitted that this is a problem, but I was not able to find any recall information regarding either problem. I feel that both problems are dangerous, since the brakes did not work properly in my situation. If cracked motor mounts are not taken care of, they could possibly cause additional damage to the engine components. I think that chrysler should be held responsible for fixing these problems at their cost. I've seen many other people complaining that even after they've "fixed" the problem, they continue to have the same problem. I think both of these items should be considered for recall.
When I apply the brakes suddenly, the car wobbles violently and almost uncontrollably. This has happened at least 3 times since I have had the car. The dealer says there was nothing wrong with the brakes, but did nothing to locate the problem.
Had brakes serviced 11/2/07. Abs light came on the very same day. Tech said it was just a sensor failure, but car was safe to drive. On dec. 22, light came on again and went off. On dec. 23, light came on and went off. On dec. 24, light came on and I experienced a grinding when I depressed the brakes. Sent it to dealer but they couldn't find anything. Picked it up on dec. 26. Picked it up and had to put it back in dec. 27 for the same problem. They sent to local chrysler dealer who says I need a new ABS module. I've done research that tells me that purchasing a new ABS module will not fix this problem.
Tl*the contact owns a 2005 chrysler pacifica. While driving 15-75 MPH, the ABS warning light illuminated. The dealer was unable to diagnose the cause of failure. Approximately two weeks later, the failure recurred. The dealer replaced the rear ABS sensor, however, the failure continued. The dealer inspected the vehicle eight times and replaced the ABS sensors and the wiring harness, but this did not correct the failure. As of october 5, 2007, the dealer had not repaired the vehicle. The failure mileage was 12,000 and current mileage was 24,000.
Tl*the contact owns a 2005 chrysler pacifica. The contact stated that the ABS warning light illuminated. The dealer replaced all the ABS sensors, however, the light continued to illuminate. While driving 30 MPH, the brakes screeched when the brake pedal was depressed. The dealer was unable to repair the failure. The failure mileage was 16,000 and current mileage was 72,000.
Driving car the ABS light comes on, first occurrence dealer replace the front ABS sensors under the warranty. Just 400 miles above the 36000 miles the ABS light came on again. This time it was the rear ABS sensors and I had to pay for them myself (out of warranty). There is a technical service bulletin from the manufacturer on this part recommending dealers to replace all 4 sensors for customers. This part is of poor quality and the manufacturer knows it. Lives are put at risks at customers expense. This part should be recall for all vehicles affected.
Faulty ABS and traction control sensor on 2005 chrysler pacifica. Both lights are on. Called chrysler, they say they have not heard any complaints! I am the second owner, but the first sensor was replaced at 18,000. This seems to be widespread, and I am surprised chrysler is not recalling this, especially since this is also a safety issue. I did a quick search for "ABS sensor traction control chrysler pacifica" and found quite a few excerpts from websites. I have them in an excel file--I would like to send them to you. Let me know an e-mail address. *jb updated 09/18/07
Tl*the contact owns a 2005 chrysler pacifica. While driving 30 MPH, he decelerated and sparks were present on the passenger side brakes. The dealer stated that the brake pad fell off. The brakes and rotors were repaired on the driver and passenger side. The current and failure mileages were 40,000. Updated 01/11/08.
My problems began on 10/03/05 @ 2,826 miles. Since that time there have been a litany of problems through eighteen months. Wheel sensors -6 were replaced. Front end noise like a rubbing sound. Returned to dealer several times. Accelerator sticking. Returned to dealer several times each time they lubricated the linkage but after two weeks the problem continued. At this point nothing else was done concerning the accelerator. Next, problem a defective axle, replaced. Power module replaced. Doors would not lock and car would not start after installation of the power module. The car had to be towed to the dealer. It was repaired. Parking brake assembly fell apart in the rear brakes as I was driving down the highway. Parking brake assembly replaced by the dealer. Front end vibration again brought to dealers attention. Another wheel sensor replaced. On 5/24/07 brought my pacifica back to the dealer concerning the front end noise. They replaced the power steering pump on 5/30/07. On 6/04/07 returned to the dealer noise in front end still there. Also, the accelerator still sticks. Concerning the front end noise, they said that a power steering line was leaking and they repaired it. The accelerator butterfly was finally replaced after over a year of complaints. On 6/08/07 I returned the car because of the same noise in the front end every time you turn left or right. At this point they decided to replace the steering rack. I picked up the car on 6/14/07 the vibration rubbing noise was still there. I returned to the dealer on 6/15/07. The service manager told me that they could not fix the car and to take the car home and wait for chrysler to call. It has now been 6 weeks and they have not called. I have called the dealer several times for up dates , they say that they do not have any information. Chrysler's letter, dated 6/26/07 states, " we consider this matter closed," even though the car has still not been repaired.
29294 miles - 04/26/07 - ABS sensor replaced again at russ darrow dealer in milwaukee, wi. Same prob from 01/13/07 did not get replaced in jan. Problem occurred this time only above freezing temperatures. Once temps above 32, occurred every day. Abs brakes engaged when brakes were applied. Braking becomes unsure. Can't tell if car will stop. Dealer says problem is not common. I disagree. Googled "ABS sensor replacement on chrysler pacifica" and found many instances of problem on the internet forums and blogs. 01/27/07 ABS indicator light is on. Abs brakes begin engaging again without reason. Contacted chrysler service dept and talked to bob in service. Explained this is the 6 or 7th time I have had a problem with the car brakes, either the ABS or the actual brakes. Would like to contact the chrysler company to find out if this is a known problem. Bought used with 13k miles from a chrysler dealer in april 2006 and it has been in the shop at least 7 times. Other times were not the brakes related. 26000+ miles 01/13/07 - ABS indicator light comes on again. Intermittent. Does not stay on. Abs brakes engaging when light comes on and brakes are applied. 25593 miles - 12/30/06 - ABS brakes engaging without ice/rain/water or other reason to engage. Abs sensor replaced by dealer service dept. 21715 miles - 08/06/06 - pulsating problem with ABS brakes - ABS sensor replaced by dealer service dept. 06/06 - replaced radio. 17000 miles - 05/06 - resurfaced rotors - squeaking.
Tl*- the contact owns a 2005 chrysler pacifica. While driving 65 MPH the contact depressed the brake pedal and it started to move up and down. The contact heard the computer make a loud noise, and the ABS warning light illuminated. The dealer stated that the driver's side front hub and the bearings should be replaced. There had not been any other occurrences since the repair. The current mileage was 8,000.
Since 2006, I've had to take my car to the service department because of ABS light turning on and off. At the time this occurs, the brakes also lock up and make noises when pressed. Each time, the service department tells me its a sensor and when replaced, it stops doing it until the next time a "sensor" needs to be replaced. The say there are multiple sensors, and each time it appears to be a different one.
Dating back to the spring of 2006, I have been having problems with the "ABS" light symbol constantly coming on in my car. I took it to the dealers on several occasions and told them that when I'm traveling for 10-15 minutes or longer it comes on. They told me that they couldn't find anything wrong and they even test drove my vehicle. I'm very concerned about this problem. I'm afraid that the braking system is going to fail on me all together.
Dt*: the contact stated while driving 30 MPH on normal road conditions, the front passenger side door opened. The door was locked but the door light that signaled the door was open was illuminated. This was the first incident with the vehicle, which also have had an engine that stalled. The engine failure light alerted the contact for the engine problem. The ABS light also alerted the contact for the brakes failure; the sensors were replaced. The dealership had honored the extended warranty but the contact was very upset because of the six times the vehicle had to be taken to the dealership.
Abs light continues to come on, vehilce has been in four times for repairs to ABS system.
Abs yellow caution light came on in march 2006. Brakes were grinding and car difficult to stop. Returned car to dealership. Left wheel sensor was faulty and replaced under warranty. November 26, 2006 ABS light on again. Brakes again grinding and car became difficult to stop. Car only has 29,000 miles.
VIN decoder
See the problems and recalls for an exact car
Buying a used 2005 Chrysler Pacifica?
Check the exact car before you pay: accidents, salvage or flood titles, odometer readings and previous owners.
Check its history