The ABS light came on and stayed on, I took it to a dealership and the replaced a $5.00 wire for about $150.00. The next day the car was jerking and losing power and the ABS light was going on and off. I then took it to a different dealership and it took them all day from 8am till 5pm to find out it was the ABS hydraulic component for the front brakes. It cost $1600.00 dollars more to fix it. These brakes have been nothing but problems this car has now been in the shop 2 times for new brakes and 2 times for the ABS. It still shakes when you stop from speed faster than 30mph!
1995 Chrysler Sebring brakes complaints
Page 2 of 2: complaints 11 to 35 of 35, newest first, as owners wrote them.
Abs module failure; module needs replacement every 25,000 mile. Dealer replaced one under warranty; currently, problem reoccurred. Dealer would only pay for the part, but not the labor. Can the federal safety agency help in this matter.
Abs system has failed on two occasions, same component within the system failed on each occasion. Mjs
On-going problem with front brake rotors needed to be resurface or replaced every 6,000 miles. Dealer notifed and was taking care of of problem for a while, now informed consumer that they would have to pay for repairs. Seeking help from the federal safety agency in this matter.
@15000 miles the brakes needed to be done @that time we complaimed they said that nothing was wrong with the car.
No deployment of airbag and failure of shoulder belt to lock upon front end collision caused driver to hit head on steering wheel and sustain cuts and scrapes to forhead and bruise to the left hip.
Abs brake failure.
Brake sensor relay failed at 20,000 miles, causing excessive wear on front brakes; owner was involved in an accident six months ago because another motorist pulled in front of the vehicle and the driver was unable to stop.
Brakes failed.
Front brakes have been replace numerous times and are still warped. Chrysler refuses to provide any assistance, stating problem is with driver.
While drving vehicle about 50 MPH and when stepping on the brake pedal to stop vehicle, consumer felt the brake pedal pumping and the steering wheel shaking. This problem happened after four thousand miles. Consumer had brakes done seven times. Manufacturer was contacted.
Blower motor failed
Moulding on fron twindshield separates/peels off, causing airflow through windshield. This is a direc tcause of the adhesive used to secure the moulding. Also, ABS brakes failed, and front ball joints failed due to a design flaw, resulting in excessive tire wear.
Excessive brake wear/warped front brake rotors. Also, power seat broke, and driver's side lock failed.
Front brake rotors warp/distort due to poor design.
Brake rotors warp every 3,000 miles, causing vehicle to severely jerk/vibrate while driving highway at 65 MPH. Rotors replaced 5 times; problem still exists.
The rear brake light sensor malfunctioned, causing excessive wear of the front brake pads, rotors and shoes, consumer also state there is a griding sound coming from the front end. Consumer has contacted the dealer on two occasions and the front shoes and pads were replaced and the brake rotors have been adjusted.
Sun roof failed.
Abs motor relay malfunction causes the ABS to work intermittedly.
Airbag did not inflate in accident.
The ABS anti-lock pump went out on three different occasions .
Failure on the ABS brakes, consumer was driving at 20 MPH and the brakes locked up, causing the consumer to have an accident. *ak consumer states as she was pulling up in front of friends house., consumer slowed by shifting down, consumer realized she was closer that she thought, approaching the rear of her friend's vehicle she hit the brakes very hard and it felt like the pedal was frozen solid, which had no effect on vehicle, consumer ran into the back of her friend's vehicle at 20 MPH no air bags deployed, no injuries, but there was slight damage to consumer's vehicle.
Premature wear of front brake pads, replace dworn out tires, also anti-theft alarm deploys at will and one horn is defective.
Defective rear wheel bearing caused wheel to wobble/fire.
Abs: brakes malfunctions to point driver have to press pedal to floor; almost complete loss of braking power; highway speed.
VIN decoder
See the problems and recalls for an exact car
Buying a used 1995 Chrysler Sebring?
Check the exact car before you pay: accidents, salvage or flood titles, odometer readings and previous owners.
Check its history