1996 Chrysler Sebring recalls
There are 7 safety recalls on record for the 1996 Chrysler Sebring, covering 1,993,153 vehicles in total across all the models in each campaign. Newest first.
All recalls
Vehicle speed control
- What is wrong
- On certain passenger vehicles equipped with 2.5l v6 engines, the throttle control cable can fray causing the throttle to bind or stick.
- Risk
- This could potentially result in a loss of throttle control, increasing the risk of a crash.
- Remedy
- Dealers will replace the throttle cable assembly. Owner notification began august 5, 2002. Owners who take their vehicles to an authorized dealer on an agreed upon service date and do not receive the free remedy within a reasonable time should contact daimlerchrysler at 1‑800‑853‑1403.
Recall number 02V186000 · Recall details
Suspension: front: control arm: lower ball joint
- What is wrong
- Vehicle description: passenger vehicles. If the rubber boots on the lower lateral arm ball joints of the front suspension were damaged during assembly, dirt and water can intrude. Also, mmc has added the potential of leaking moisture, which can cause the ball stud to corrode.
- Risk
- This condition could cause the lower lateral arm ball joint to separate, increasing the risk of a vehicle crash. This campaign supercedes mmc's previous safety recall campaign, see 99v‑066.
- Remedy
- Dealers will inspect the lower lateral arm ball joint for wear. Ball joints that exhibit wear beyond the established tolerance will be replaced with newly designed lateral arm ball joints. Ball joints that are within the established tolerance will be cleaned and a special sealant will be applied to prevent intrusion of moisture.
Recall number 00V421002 · Recall details
Suspension: front: control arm: lower ball joint
- What is wrong
- Vehicle description: passenger vehicles. If the rubber boots on the lower lateral arm ball joints of the front suspension were damaged during assembly, dirt and water can intrude.
- Risk
- This condition could cause the lower lateral arm ball joint to separate, increasing the risk of a vehicle crash.
- Remedy
- Dealers will inspect the rubber boots, and if the boot is damaged, they will replace the lower lateral arm and ball joint on the affected vehicles.
Recall number 99V066003 · Recall details
Power train: automatic transmission: park/neutral start interlock switch
- What is wrong
- Vehicle description: passenger vehicles equipped with automatic transmissions. The adjustment of the cable connecting the console shifter mechanism to the ignition key can cause a trapped key condition which can result in a low force required to depress the shift button. A combination of applying a mis-adjusted release button with a low force attempt to shift out of park with the key in the locked position, can break the connecting pin in the shifter.
- Risk
- If this happens, the "ignition-park" interlock system will be nonfunctional.
- Remedy
- Dealers will inspect for proper operation of the system. Any vehicles that are not functional after the inspection will have the shift mechanism and cable replaced with a "self-adjusting" design.
Recall number 98V183000 · Recall details
Suspension: front: control arm: lower ball joint
- What is wrong
- Vehicle description: passenger vehicles. The lower control arm ball joint can separate due to loss of lubrication.
- Risk
- Separation of the ball joint could cause a loss of steering control increasing the risk of a vehicle crash.
- Remedy
- Dealers will inspect the ball joint end housing cover seal for leakage with a high pressure air tester and the rubber boot will be visually inspected for damage. If the cover seal leaks or the boot is damaged, the lower control arm will be replaced.
Recall number 97V201000 · Recall details
Visibility: rearview mirrors/devices
- What is wrong
- The electrical contacts in the power mirror switch can accumulate road salt due to water entering into the switch.
- Risk
- This can result in a high resistance short circuit and possibly cause a vehicle fire.
- Remedy
- Dealers will replace the power mirror switch with a newly designed switch.
Recall number 97V015000 · Recall details
Service brakes, hydraulic: power assist
- What is wrong
- The power brake booster vacuum hose was improperly installed on the intake manifold vacuum nipple.
- Risk
- A disconnected vacuum hose causes an increase in engine idle speed and loss of power assist during brake application increasing the risk of a vehicle accident.
- Remedy
- Dealers will fully install the intake manifold vacuum hose to the vacuum nipple on the intake manifold.
Recall number 96V123000 · Recall details
Questions about the 1996 Chrysler Sebring recalls
How do I check if my 1996 Chrysler Sebring has an open recall?
Enter your VIN in the VIN decoder on this page to see the recalls for your exact model and year, then confirm with any dealer of the brand or the manufacturer, who can tell you whether the repair was already done on your car.
Do I have to pay for a recall repair?
No. Safety recall repairs are free at any authorized dealer of the brand, even if the car is out of warranty or you are not the first owner.
How many recalls does the 1996 Chrysler Sebring have?
7, covering vehicle speed control, suspension and power train.
VIN decoder
See the problems and recalls for an exact car
Buying a used 1996 Chrysler Sebring?
Check the exact car before you pay: accidents, salvage or flood titles, odometer readings and previous owners.
Check its history