Tl*the contact owns a 1993 chrysler town and country. The contact stated that the vehicle was covered by a warranty repair that chrysler does not honor. The dealer repaired the brakes; however, the failure recurred in two months. The dealer replaced the master cylinder, pressure motor, and pump motor assembly. The contact took the vehicle back to the dealer and was told that some of the components on the vehicle were missing. The contact is concerned about the safety risk since the mounting bracket assembly was not attached to the vehicle. The VIN was not available. The failure mileage was 125000 and the current mileage was 126000.
1993 Chrysler Town and Country brakes complaints
Page 2 of 5: complaints 11 to 40 of 123, newest first, as owners wrote them.
Tl*the contact owns a 1993 chrysler town and country. The contact stated that the ABS indicator remained illuminated on the instrument panel. She took the vehicle to the dealer and they stated that the previous owner already had the vehicle repaired according to the federal safety agency campaign id number 96v099000 (service brakes, hydraulic:antilock). The contact paid for the repairs out of pocket and the dealer replaced the filter module, brake rotors, and brake caliper. The repair corrected the failure for approximately one year, but it has recently recurred. The ABS indicator illuminates randomly. The contact is upset because the failure has occurred twice and she believes that the dealer is repairing the vehicle with a defective part, which causes the problem to recur. The failure mileage was 45,000 and current mileage was 51,000. Updated 02-23-09 *bf the ABS module had an internal failure and the ABS accumulator had lost its precharge.. Updated 02/25/09.
Dt*: the contact stated the ABS brake lights illuminated and while stopping the vehicle from 25 MPH, the brakes became difficult to apply. The vehicle was taken to an independent mechanic shop, who determined that the ABS brakes needed to be replaced under the federal safety agency recall #96v099000, regarding service brakes, hydraulic:antilock. The vehicle was towed the dealer who refused to examine or perform repairs, because the vehicle was not included in the recall due to the VIN. The vehicle was towed back to the residence, and no repairs were made. Updated 11/30/2006 -
Rio rancho chrysler dealer, located at 25 rio rancho rd., pomona, california 91766, in cooperation with the chrysler corporation has caused the following: a.failure to correct the ABS system leak and resulting ABS light coming and staying on. Within days of dealer??s repair work, the leak and ABS light problems were discovered. Now the dealer states it to be a new problem that occurred during the couple of days of dealer??s work. The dealer says the new problem is the shorted ABS pressure switch, with a replacement cost of $565. The dealer further asserts the newly discovered shorted ABS switch has rendered ABS pump inoperative and causing the leak from brake fluid reservoir. The dealer is wrong on both counts. The ABS system works well so long the brake fluid level is adequate, and the leakage is not from reservoir cap but from somewhere else in the ABS system, which was not corrected the first time. B.the repair should have been part of the federal safety agency recall 96v099000, without any charge to the owner. However, the dealer, in concert with chrysler corporation, replaced the ABS accumulator without any factual basis and charged the vehicle owner $521.88 for it. Even if one assumes that the accumulator needed replacement, there should not be a $274.38 charge for labor. Because it??s dismantling and remounting is part of ABS piston, pump and motor replacement, which by dealer??s own assertion was covered under the above recall. C.the dealer in it??s quest to milk, gouge and hose the customer for more money, deliberately left the tps connecter ajar despite a second visit by the owner, rendering the vehicle unsafe stalling at or near idle speed in traffic and on highways.
Dt*: the contact stated while driving 35 MPH, the vehicle's hydraulic brakes malfunctioned even with the use of both feet applied to the brake pedal. The vehicle's had an extended stopping distance whenever the brakes were applied. The brake light remained illuminated during normal driving conditions. The design was all 4 wheel antilock brakes. The vehicle was taken to the service dealer who determined that the ABS failed due to an electrical problem but the computer would not comply. Also, the manufacturer was notified and provided the same information as the service dealer. The contact diagnosed the problem and fixed the vehicle under recall# 96v099000.
1993 town and country mini van anti lock brake system has failed on numerous occasions. *ts the consumer stated the ABS and brake warning light illuminated . In addition, the brake pedal became difficult to depress. The accumulator, pump motor, ABS pump, and relay were all replaced, however the problem continued. The dealer stated the problem could not be determined and /or not repairable.
Dt*: the contact stated the brakes on the vehicle completely failed. There is a recall, #96v099000 concerning the antilock brakes; however the dealer informed the contact the failure was not part of the recall. An independent repair shop indicated the failure was in fact the recalled part.
I have had my ABS pump replaced 4 times under the recall. Most of the time the filter also must be replaced. We have spent almost $500 on this related repair. When I called the customer assistance line I was told they had a "commitment not to assist" and that "they will not help". This is completely unacceptable. To not provide any recourse on this is pathetic. In addition to costing us additional money, this failure has put me and my family at risk. The last time it failed, I cracked a bone in my foot because I had to hit the brakes so hard. To treat a customer like this is completely unacceptable.
Dt*: the contact states there is the federal safety agency recall campaign 96v099000 regarding the ABS brakes. The parts needed to repair the vehicle are not available at the local dealership. The contact spoke to the manufacturer, who has confirmed that parts were not available.
Vehicle experienced a problem with the ABS brake system. Driver was unable to push the brake pedal down before starting the vehicle. There was a short in the controller anti-lock brake system. Owner contacted the dealer, who said the parts needed to repaired. This defect was no longer available through chrysler.
Consumer received recall 96v099000 concerning ABS brake failure. Consumer had a concern that ABS light stayed on, illuminating while driving, and the brake pedal will not depress. Vehicle had been to dealer on three separate occasions, but problem recurred.
Recall no.#96v099000, hydraulic anti-skid system: the manufacturer continued to replace the defective part with the same exact part. The part was replaced five times with in a two year period.
Request for reimbursement for repairs performed to ABS system.*mr while driving the ABS light and brake light illuminated. The vehicle was taken tot he dealer where it was determined that the ABS pump failed. About eight months later the brakes failed and the vehicle was taken to the dealer.
Recall 96 v 099 000 ABS brake repairs failed 3 times after the recall parts were replaced. At time of the last failure it almost caused an accident because the vehicle experienced extended stopping distance when brake pedal was depressed.
Recall#96v099000 concerning ABS control unit/module. The dealer would do repairs, but was charging for the replacement of the part. Dealer stated that brake problem would not be solved without replacing ABS control unit/module. Consumer requested a call back. Manufacturer would not cover that part because it was not within the warranty time period.
Abs brakes failed and van would not stop. A on going problem that started in 1995 and still continues to the present 2003. Dealership has had vechicle to repair problem everyyear until 2000. My ABS bake light still comes on and I have had 10-ten complete brake jobs done to my van. The dealership has had my van for almost 2 years for repair and we could not use it. I need help brakes are failing again and just after 5000 miles. I can not get anyone to take my van in on trade for another vechicle. I need help so no one will be seriously injured. We have had to many near misses with the brakes failing. Thank you robert phelps.
The anti-lock brake system failed, which caused the vehicle to experience extended stopping distance.
The brake light and ABS light illuminated, and all of a sudden the vehicle had no brakes, consumer had to hit a curve to stop the vehicle.
Brake pedal went to floor, no braking, went thru intersection. Pedal came right back. Drove car 1/4 mile to home, called local service dealer. Dealer has car 1 week, says can't duplicate problem and won't do any of the 3 ABS recalls involved. This is a well documented problem, safety recall and symptom. It is also well document that dealers run owners around the "can't duplicate" excuse. The pump is deterioating and fouling the cylinder and piston causing an intermittent (pedal to floor)problem in the early stages of total brake failure. Need to get the recall fix performed before people are killed. Spoke to daimler chrysler recall center and cc csr - no help. Can you help me get this done? Dt
I have had the recalled ABS pump replaced 6 times in the last 25,000 miles. This includes replacing this part 4 times in the last 3 months. New parts last as little as 22 miles. Chrysler tells me to find another dealer. I do not trust this car or its brake system any longer. Mr
There was a recall, 96v099, issued regarding the ABS actuator, piston and pump. Consumer had no ABS problems until the repairs were made per recall. Since then, consumer has had three ABS failures. The first two were sudden and unexpected causing a near miss. The vehicle was repaired following both failures. The third failure has consumer's confidence in the competency of dodge to correct the problem. Consumer is requesting information on ABS components and how they work and a full disclosure as to why the recall occurred in the first place.
When applying brakes pedal went to the floor, resulting in extened stopping distance. Dealer will be notified. Feel free to provide any further infromation.
Abs light came on at 55-60 MPH, consumer applied brakes pedal felt hard,and there was extended stopping distance. Dealer cannot duplicate the problem.
Front brakes engaged without warning while vehicle was merging onto highway. Vehicle has been checked by dealer. Abs module that control ABS system is faulty.
Consumer had to repair anti- lock brake system 2 weeks ago without warning while driving 65 MPH. Vehicle hit a side rail. Dealer has been notified about problem.
Got recall notice 96v099000/ manufacturer's recall 685, and had recall repairs done. However, problem still exists. Had to have recall repairs done over at least 3 times.
Abs & brake lights 'on' and no braking. Sometimes ABS & brake lights are 'on' and braking is normal. Dealer finally performed recall #685. Brakes were ok for 11 months. Orig. Problem is back. Dealer will not fix. Recommended I go to a independant garage for repairs. Have not been able to find anyone willing to work on the ABS-10 brake system.
Abs and brake lights 'on,' and no braking. Sometimes ABS and brake lights are 'on' and braking is normal. Dealer finally performed recall #685. Brakes were ok for 11 months. Orig. Problem is back. Dealer will not fix. Recommended I go to a independent garage for repairs. Have not been able find anyone willing to work on the ABS-10 brake system.
Consumer states there was a recall on the ABS actuator #96v099, vehicle was then inspected and found to be okay, consumer stated he was informed that if it ever failed for the life of the vehicle it would be replaced free of charge, consumer states a few weeks ago the brake pedal fluctuated and had been acting irregular, at times there are sounds coming from the actuator when it is operating and its sounds like it is not acting properly and the ABS warning light illuminated after any driving of the vehicle, vehicle was taken to mechanic and there were no problems with the brakes, however mechanic stated it sounded like the actuator or ABS was not functioning properly.
Consumer received recall 96v099000 for ABS failure. Dealership was going to charge consumer $240 to run a diagnostic on vehicle before recall was to be repaired. Consumer stated that ABS light was coming on , and brakes do not completely bring vehicle to a stop. Please provide any additional information/attachments.
VIN decoder
See the problems and recalls for an exact car
Buying a used 1993 Chrysler Town and Country?
Check the exact car before you pay: accidents, salvage or flood titles, odometer readings and previous owners.
Check its history