Collins SL400 recalls
There are 4 safety recalls on record for the Collins SL400, covering 2,079 vehicles in total across all the models in each campaign. Newest first.
Collins SL400 recalls by model year
All recalls
Other: school bus stop arm assembly
- What is wrong
- Collins Bus Corporation (Collins) is recalling certain model year 2015 DE416, DE416WR, DE500, DE516, DE516WR, DH400, DH416, DH416WR, DH500, DH516, SH400, SL400, TH400, and TL400 school buses manufactured May 1, 2015, to December 21, 2015, equipped with certain Transpec T6000, T6100, and T7000 series school bus stop arms. The affected stop arms have a reflective decal that may peel loose from the stop arm. As such, these stop arms fail to comply with the requirements of Federal Motor Vehicle Safety Standard (FMVSS) number 131, "School Bus Pedestrian Safety Devices."
- Risk
- Without a reflective decal, the stop arms would have reduced visibility to other drivers, increasing the risk of a crash.
- Remedy
- Collins will notify owners, and the stop arm blade assemblies will be replaced, free of charge. The recall began on February 22, 2016. Owners may contact Collins customer service at 1‑800‑533‑1850, or Transpec customer service at 1‑800‑951‑7867.
Recall number 16V031000 · Recall details
Structure: body
- What is wrong
- Collins Bus Corporation (Collins) is recalling certain model year 2014 Collins and Mid Bus school buses, models SL400, SL408, DH400, DH416, DE416WR, DH500, DH516 and DE516WR, manufactured from July 21, 2014, to August 19, 2014. The affected vehicles may have been assembled with an inadequate amount of adhesive on some interior side panel joints. In the case of a collision to the side of the vehicle, the edge interior panel may become exposed. As such, these vehicles fail to comply with the requirements of Federal Motor Vehicle Safety Standard No. 221, "School Bus Body Joint Strength."
- Risk
- If the edge interior panel becomes exposed, there is an increased risk of injury to the passengers.
- Remedy
- Collins will notify owners, and dealers will install additional structural fasteners on the applicable body panel joints, free of charge. The recall began on October 8, 2014 . Owners may contact Collins customer service at 1‑800‑533‑1850.
Recall number 14V523000 · Recall details
Seat belts
- What is wrong
- Collins Bus Corporation (Collins) is recalling certain model year 2013 model school bus and multi-functional school activity buses manufactured August 20, 2013, through November 13, 2013 and equipped with IMMI-brand L9 seat belt buckles. When the button is pressed to release the seat belt, the latch plate can become partially engaged with the buckle, making the seat belt difficult to unlatch. Thus, the buses fail to conform to the requirements of Federal Motor Vehicle Safety Standard (FMVSS) No. 209, "Seat Belt Assemblies."
- Risk
- If the latch plate remains partially engaged after the button is pressed, egress from the vehicle could be hindered which would increase the risk of injury in the event of an emergency.
- Remedy
- Collins will notify owners, and dealers will inspect the seat belt buckle, and if necessary, replace the seat belt buckles, free of charge. The recall began on January 7, 2014. Owners may contact Collins at 1‑800‑533‑1850.
Recall number 13V590000 · Recall details
Fuel system, other
- What is wrong
- Collins is recalling certain model year 2012 Collins, Corbeil, and Mid-Bus school bus and multi-function school activity buses, models SL400, SH400, DH400, DH416 with 139" wheel base and two-passenger seat set at 24, 25, 26, 27, or 28" hip to knee spacing and three-passenger seat set at 24, 25, or 26" hip to knee spacing and model year 2012 DH500 and DH516 with 159" wheel base and two-passenger seat set at 28 or 29" hip to knee spacing and three-passenger seat set at 27, 28, or 29" hip to knee spacing. These buses were manufactured from March 12, 2012, through September 20, 2012. In some floor plans on these models of buses, there is the possibility that the fuel filler hose was damaged during seat or seat track installation or that a seat bolt and/or the seat bolt bracket interferes with the routing of the fuel fill hose. The fuel fill hose runs from the exterior of the bus, through a housing in the bus, then under the bus and toward the fuel tank. Some floor plans have a seat or track bolt that comes through the floor near the area where the hose crosses the chassis frame. In addition to possible damage during installation, there is a chance that the bolt or the bracket can abrade or puncture the hose in this area.
- Risk
- If the integrity of this hose is breached, fuel could spill. In the case of gasoline or diesel vehicle, fuel could spill during fueling operations or in the event of a crash, increasing the risk of a fire. In the case of a propane vehicle, propane gas could be released during fueling operations (check valves prevent release from the tanks) creating the risk of a fire during filling.
- Remedy
- Collins will notify owners, and dealers will repair the buses free of charge. The safety recall began on August 13, 2012. Owners may contact Collins at 1‑800‑533‑1850.
Recall number 12V345000 · Recall details
Questions about the Collins SL400 recalls
How do I check if my Collins SL400 has an open recall?
Enter your VIN in the VIN decoder on this page to see the recalls for your exact model and year, then confirm with any dealer of the brand or the manufacturer, who can tell you whether the repair was already done on your car.
Do I have to pay for a recall repair?
No. Safety recall repairs are free at any authorized dealer of the brand, even if the car is out of warranty or you are not the first owner.
How many recalls does the Collins SL400 have?
4, covering other, structure and seat belts.
VIN decoder
See the problems and recalls for an exact car
Buying a used Collins SL400?
Check the exact car before you pay: accidents, salvage or flood titles, odometer readings and previous owners.
Check its history