The federal safety agency recall campaign 04v357000 concerning camshaft position sensor. Three months after recall repairs were performed the problem recurred. Check engine light appeared on the dashboard and the vehicle was taken to the dealer for inspection, and mechanic determined that the camshaft position sensor needed to be replaced.
2001 Daewoo Leganza: check engine light
22 of the 128 complaints about the 2001 Daewoo Leganza describe check engine light.
- owner complaints
- 22
- of this car's complaints
- 17%
- typical mileage
- 50,000
- recalls
- 2
Check engine light by model year
What owners say
In september 2004 I received notification of a recall relating to the cam shaft position sensor in my 2001 daewoo leganza. The faulty device was supposed to cause the check engine warning light to illuminate (which it did), and a burning smell and/or visible smoke (which also occurred). The letter mentiond a range of VIN numbers of vehicles included in the recall and my car is well within that range. I took the car to an authorized service center for the repair and was told that, despite the fact that the problem resulting in this recall was exactly what was happening to my car, this was not a covered service because the lot number of the part they removed was not within the affected lot of defective parts. The letter I received made no mention of specific lots affected, but it did clearly state, "this service will be performed for you at no charge..." I was charged for the service and the daewoo customer assistance center representative claims no liability for the faulty part and repairs when I spoke to them on the afternoon of march 8,2005.
Consumer received recall notice 0v4357000 concerning cam shaft position sensor. Dealer was not in operation.*ak recall campaign; the check engine light came on in the vehicle. The consumer was told that the vehicle was not included in the recall. When the dealer filed bankrupt the vehicle had no warranty at all. The consumer can not afford to have the recall service done.
The engine light had came on and the rack and pinion failed. *bf *sc
The check engine light is on. Camshaft sensor recall 04v357000 was issued. *ak the oil pipe line was replaced due to corrosion. The rocker pin was also replaced.
Recall 04v357000 concerning cam shaft position sensor. The consumer's vehicle experienced problem with the check engine light illuminating, and a burning odor was smelled. The vehicle was taken to an authorized service center. The check engine light was still illuminated, and the engine was accelerating too high. Also, the consumer made several attempts to contact the service center by voice mail and fax. The consumer received no response. *ak the heated seats were inoperative, there were no fog lights, the windows fogged when it rained or snowed and when the heat was on, the keys did not work, and there was a rattling under the vehicle.
The consumer was unable to have the camshaft position sensor recall 04v357000 performed because there wasn't any dealerships in their state. The engine light is currently on. *jb there was an odor of melting under the hood. The consumer was informed that the part number did not fall under the recall.
Engine light was on. Dealer refused to repair the cam shaft sensor recall 04v357000. *ak even though the consumer received the recall letter, the dealer stated the consumers vehicle had to have a certain part number.
A recall for the cam shaft position sensor was issued. The dealer refused to honor the recall because the part had not developed a crack, however the engine light wa on. Please provide additional information.
The check engine light was on. There were no dealers available to make the repair to the camshaft sensor. The federal safety agency recall 04v357000.
Consumer received recall 04v357000 concerning cam shaft position sensor. Dealer refused to honor recall because the sensor number did not match up with the sensor lot numbers. This issue was not stated in the recall notice. Vehicle check engine light was illuminating.
Check engine light comes on. There is no dealer to do recall repairs. Consumer will have to assume the cost to have the repairs done. Cam shaft sensor recall 04v357000
Related recalls
Engine and engine cooling
- What is wrong
- On certain passenger vehicles, the camshaft position sensor may melt resulting in a burning smell and visible smoke, which may subsequently lead to the melting of the camshaft cover and the camshaft position sensor wire harness.
- Risk
- This could possibly cause an underhood fire.
- Remedy
- Dealers will replace the camshaft position sensors and install an additional fuse. Owners should contact daewoo puerto rico at 1‑877‑362‑1234 option 6.
Recall number 04V394000 · Recall details
Engine and engine cooling
- What is wrong
- On certain passenger vehicles, the camshaft position sensor may melt resulting in a burning smell and visible smoke, which may subsequently lead to the melting of the camshaft cover and the camshaft position sensor wire harness.
- Risk
- This could possibly cause an underhood fire.
- Remedy
- Dealers will replace the camshaft position sensors and install an additional fuse. The recall began on september 7, 2004. Owners should contact daewoo at 1‑877‑362‑1234, option 6, or find a local dealer through their website at www.daewoous.com.
Recall number 04V357000 · Recall details
Questions about the 2001 Daewoo Leganza check engine light
Is check engine light a common problem on the 2001 Daewoo Leganza?
22 of 128 owner complaints about the 2001 Daewoo Leganza (17%) mention check engine light. The model year with the most reports is 2000.
Is there a recall or service bulletin for this on the 2001 Daewoo Leganza?
There are 2 recalls and 0 service bulletins for the same area of the car. Check them below with your VIN.
VIN decoder
See the problems and recalls for an exact car
Buying a used 2001 Daewoo Leganza?
Check the exact car before you pay: accidents, salvage or flood titles, odometer readings and previous owners.
Check its history