1999 Ferrari 360 Modena F1 Problems: 0 Complaints, 5 Recalls

The worst 1999 Ferrari 360 Modena F1 problems

Ranked by number of owner complaints. Mileage and cost come from what owners wrote.

Problems by type

Tap a problem to see which part fails, at what mileage and in which other years.

Recalls 5

Unknown or otherReported February 3, 2001 · 353 vehicles affected

What is wrong: Vehicle description: passenger vehicles. A software programming error exists in the integrated electronic instrument cluster. This error exists in the brake system warning light monitoring function of the instrument cluster. The red electronic brake distribution warning light does not illuminate.
Risk: As a result, if a brake problem were to exist, the driver would not be aware of it.
Remedy: Dealers will remove the instrument cluster from the vehicle and download updated software into the instrument cluster. Owner notification began march 31, 2001. Owners who take their vehicles to an authorized dealer on an agreed upon service date and do not receive the free remedy within a reasonable time should contact ferrari at 1‑201‑816‑2600.

Recall number 01V025000 · Recall details

Power train: clutch assemblyReported October 24, 2000 · 568 vehicles affected

What is wrong: Vehicle description: passenger vehicles. The starter ring gear, which is attached to the clutch assembly with three mounting screws, could become separated from the clutch assembly. This possible failure could be caused by (1) the fracture of the starter ring gear itself at the mounting holes due to an incorrect positioning of the mounting holes, or (2) by the failure of the mounting screws. If either of these conditions would occur, the result would be fragments of the starter ring gear being thrown from the clutch area.
Risk: If these fragments came into contact with the vehicle's tire, a puncture could occur resulting in loss of vehicle control.
Remedy: Dealers will (1) replace the starter ring gear mounting screws and measuring the starter ring gear mounting holes. The measurement of the starter ring gear will determine if the correct position of the mounting holes exists and if the position is incorrect, the starter ring gear will also be replaced; or (2) replace the starter ring gear with a new ring gear having the correctly positioned mounting holes and the replacement of the mounting screws.

Recall number 00V340000 · Recall details

Air bagsReported March 29, 2000 · 132 vehicles affected

What is wrong: Vehicle description: passenger vehicles. The mounting of the air bag electronic control unit (ecu) may not be suited for long term reliability. If left unchanged, the mounting could become weak and the ability of the air bag ecu to sense a crash would be impaired.
Risk: If a crash should occur, the air bag may not deploy as expected.
Remedy: Dealers will install longer screws, which ensure better tightening and securing of the ecu to the body element.

Recall number 00V098000 · Recall details

Service brakes, hydraulic: antilock/traction control/electronic limited slip: control unit/moduleReported March 29, 2000 · 173 vehicles affected

What is wrong: Vehicle description: passenger vehicles. The ABS (anti-lock braking system)/asr (traction control system) electronic control unit is affected by an error in production by the supplier.
Risk: The ABS feature may not function and could cause the brake failure warning light to illuminate. Also, the electronic brake force distribution feature would not function causing vehicle instability under very hard braking.
Remedy: Dealers will replace the ABS/asr electronic control unit.

Recall number 00V099000 · Recall details

Service brakes, hydraulic: foundation components: hoses, lines/piping, and fittingsReported March 8, 2000 · 34 vehicles affected

What is wrong: Vehicle description: passenger vehicles. Brake and clutch fluid reservoir hoses may not be resistant to brake fluid, which could cause failure of the hoses.
Risk: Should a hose failure occur, the brake failure light would light up, followed by loss of vehicle braking efficiency.
Remedy: Dealers will inspect the hoses and, if required, install new hoses that are resistant to brake fluid.

Recall number 00V078000 · Recall details

See all 5 recalls for the 1999 Ferrari 360 Modena F1

Technical service bulletins for the 1999 Ferrari 360 Modena F1 14

Bulletins tell dealers how to fix known problems. A warranty extension means the manufacturer pays for that repair for longer.

Nov 5, 2019 Service bulletinRegistration of Maintenance Services
Aug 22, 2019 Service bulletin2019 Technical Documentation Update
Aug 22, 2019 Service bulletinUpdated Contents with reference to TI 2608
Jul 31, 2019 Service bulletinTakata Airbag Client Info Request
Jul 24, 2019 Service bulletinNew functions in Service Entry
Jul 23, 2019 Service bulletinÂPro-Teamâ anti stone-chipping film
Jul 23, 2019 Service bulletinNew âErrors Foundâ field in ROL creation page
Jul 23, 2019 Service bulletinCarbon Ceramic Brakes
Jul 19, 2019 Service bulletin2019 Technical Documentation Update 6
Jul 19, 2019 Service bulletinPacking components for shipment for Parts Return from network

See all 14 bulletins for the 1999 Ferrari 360 Modena F1

Compare the 1999 Ferrari 360 Modena F1

Other model years

Questions about the 1999 Ferrari 360 Modena F1

Is the 1999 Ferrari 360 Modena F1 reliable?

Owners have filed 0 complaints about the 1999 Ferrari 360 Modena F1.

What is the most common problem with the 1999 Ferrari 360 Modena F1?

There are not enough complaints to tell.

How many recalls does the 1999 Ferrari 360 Modena F1 have?

5 recalls, covering unknown or other, power train and air bags.

VIN decoder

See the problems and recalls for an exact car

Buying a used 1999 Ferrari 360 Modena F1?

Check the exact car before you pay: accidents, salvage or flood titles, odometer readings and previous owners.

Check its history

1999 Ferrari 360 Modena F1 problems