Check a VIN

Ferrari 360 Modena F1 recalls

There are 5 safety recalls on record for the Ferrari 360 Modena F1, covering 1,260 vehicles in total across all the models in each campaign. Newest first.

Ferrari 360 Modena F1 recalls by model year

2000 11999 5

All recalls

Unknown or otherReported February 3, 2001 · 353 vehicles affected
What is wrong
Vehicle description: passenger vehicles. A software programming error exists in the integrated electronic instrument cluster. This error exists in the brake system warning light monitoring function of the instrument cluster. The red electronic brake distribution warning light does not illuminate.
Risk
As a result, if a brake problem were to exist, the driver would not be aware of it.
Remedy
Dealers will remove the instrument cluster from the vehicle and download updated software into the instrument cluster. Owner notification began march 31, 2001. Owners who take their vehicles to an authorized dealer on an agreed upon service date and do not receive the free remedy within a reasonable time should contact ferrari at 1‑201‑816‑2600.

Recall number 01V025000 · Recall details

Power train: clutch assemblyReported October 24, 2000 · 568 vehicles affected
What is wrong
Vehicle description: passenger vehicles. The starter ring gear, which is attached to the clutch assembly with three mounting screws, could become separated from the clutch assembly. This possible failure could be caused by (1) the fracture of the starter ring gear itself at the mounting holes due to an incorrect positioning of the mounting holes, or (2) by the failure of the mounting screws. If either of these conditions would occur, the result would be fragments of the starter ring gear being thrown from the clutch area.
Risk
If these fragments came into contact with the vehicle's tire, a puncture could occur resulting in loss of vehicle control.
Remedy
Dealers will (1) replace the starter ring gear mounting screws and measuring the starter ring gear mounting holes. The measurement of the starter ring gear will determine if the correct position of the mounting holes exists and if the position is incorrect, the starter ring gear will also be replaced; or (2) replace the starter ring gear with a new ring gear having the correctly positioned mounting holes and the replacement of the mounting screws.

Recall number 00V340000 · Recall details

Service brakes, hydraulic: antilock/traction control/electronic limited slip: control unit/moduleReported March 29, 2000 · 173 vehicles affected
What is wrong
Vehicle description: passenger vehicles. The ABS (anti-lock braking system)/asr (traction control system) electronic control unit is affected by an error in production by the supplier.
Risk
The ABS feature may not function and could cause the brake failure warning light to illuminate. Also, the electronic brake force distribution feature would not function causing vehicle instability under very hard braking.
Remedy
Dealers will replace the ABS/asr electronic control unit.

Recall number 00V099000 · Recall details

Air bagsReported March 29, 2000 · 132 vehicles affected
What is wrong
Vehicle description: passenger vehicles. The mounting of the air bag electronic control unit (ecu) may not be suited for long term reliability. If left unchanged, the mounting could become weak and the ability of the air bag ecu to sense a crash would be impaired.
Risk
If a crash should occur, the air bag may not deploy as expected.
Remedy
Dealers will install longer screws, which ensure better tightening and securing of the ecu to the body element.

Recall number 00V098000 · Recall details

Service brakes, hydraulic: foundation components: hoses, lines/piping, and fittingsReported March 8, 2000 · 34 vehicles affected
What is wrong
Vehicle description: passenger vehicles. Brake and clutch fluid reservoir hoses may not be resistant to brake fluid, which could cause failure of the hoses.
Risk
Should a hose failure occur, the brake failure light would light up, followed by loss of vehicle braking efficiency.
Remedy
Dealers will inspect the hoses and, if required, install new hoses that are resistant to brake fluid.

Recall number 00V078000 · Recall details

Questions about the Ferrari 360 Modena F1 recalls

How do I check if my Ferrari 360 Modena F1 has an open recall?

Enter your VIN in the VIN decoder on this page to see the recalls for your exact model and year, then confirm with any dealer of the brand or the manufacturer, who can tell you whether the repair was already done on your car.

Do I have to pay for a recall repair?

No. Safety recall repairs are free at any authorized dealer of the brand, even if the car is out of warranty or you are not the first owner.

How many recalls does the Ferrari 360 Modena F1 have?

5, covering unknown or other, power train and service brakes, hydraulic.

VIN decoder

See the problems and recalls for an exact car

Buying a used Ferrari 360 Modena F1?

Check the exact car before you pay: accidents, salvage or flood titles, odometer readings and previous owners.

Check its history