2005 Freightliner Coronado recalls

What is wrong

Daimler Trucks North America LLC (DTNA) is recalling certain 2002-2017 Freightliner Cascadia, Century Class, Columbia and Coronado trucks and Western Star 4700, 4900, 5700, 5900 and 6900 trucks. These vehicles are equipped with Kidde Plastic-Handle or Push Button 'Pindicator' Fire Extinguishers that may become clogged, preventing the extinguisher from discharging as expected or excessive force may be needed to activate the extinguisher. Additionally, in certain models, the nozzle may detach from the valve assembly with enough force that it could cause injury and also render the product inoperable. For a full list of the affected fire extinguisher models visit:

Risk

In the event of a fire, if the fire extinguisher does not function properly, it can increase the risk of injury.

Remedy

DTNA will notify owners, and instruct them to contact Kidde for a replacement fire extinguisher, free of charge. The recall began on April 11, 2018. Owners may contact DTNA customer service at 1‑800‑547‑0712, or contact Kidde customer service toll-free at 1‑855‑262‑3540, or online at www.kidde.com and click on "Product Safety Recall" for more information. DTNA's number for this recall is FL-759.

Recall number 17V810000 · Recall details

What is wrong

Daimler trucks is recalling certain model year 2005-2011 freightliner cascadia, columbia, century, coronado, and classic xl trucks manufactured from november 1, 2004, through june 15, 2010 for the rack and pinion steering system. The lower pinion bearing may corrode and fail. A failed bearing may lead to damage of the spool valve seals. A damage spool valve seal may allow hydraulic fluid to flow to the right or left turn port instead of flowing to the return port.

Risk

The steering could unexpectedly turn left or right, making the vehicle more difficult to control and increasing the risk of a crash.

Remedy

Daimler trucks will inspect the lower bearing for corrosion. If corrosion is found, the rack and pinion system will be replaced. If no corrosion is found, on the bearing, the bearing will be packed with grease and the rubber bellows will be replaced with sealant added between the bellows and the rack housing. An interim letter was mailed in december 2011. Owners may contact daimler trucks toll-free at 1‑800‑547‑0712.

Recall number 11V514000 · Recall details

What is wrong

Daimler trucks is recalling model year 2004-2010 trucks equipped with caterpillar c15 engine. The variable valve actuation oil line may rub against the p-clips retaining the oil line, causing an oil leak.

Risk

An oil leak may result in a fire.

Remedy

Daimler trucks is working with caterpillar to remedy these vehicles. Please see caterpillar's defect report 09e-020. Caterpillar will inspect and repair the necessary components free of charge. The recall began on may 5, 2009. Owners may contact caterpillar toll-free at 1‑800‑447‑4986 or daimler trucks at 1‑800‑547‑0712.

Recall number 09V366000 · Recall details

What is wrong

Daimler trucks is recalling 62,000 my 2005-2007 freightliner business class, century class, columbia, coronado, fld, classic, sterling a-line, l-line, and western star 4900 trucks. A fractured fuel line could leak diesel fuel.

Risk

If a leak continues undetected under certain conditions, fuel may ignite at a hot engine surface and/or fuel may be spilled on the road surface.

Remedy

High pressure fuel lines and transfer tubes will be inspected and replaced free of charged. The recall began on july 9, 2008. Owners may contact daimler trucks at 1‑800‑547‑0712.

Recall number 08V113000 · Recall details

What is wrong

On certain trucks equipped with rack and pinion steering, the ball socket assembly at the inner end of the driver side tie rod may be damaged in a sharp turn. Excessive tie rod angles may loosen the tie rod in the ball socket or damage the threaded tie rod socket attachment to the steering rack on the driver side. The threaded end of the ball socket assembly may fracture and separate.

Risk

A fractured tie rod assembly will make the vehicle more difficult to control at higher speeds and a crash may occur.

Remedy

Dealers will change the front axle steering stops to prevent interference in the tie rod ball socket assembly and steering components will be replaced free of charge. The recall began on july 8, 2008, and will be mailed in phases through december 31, 2008. Owners may contact freightliner at 1‑800‑547‑0712.

Recall number 07V403000 · Recall details

What is wrong

On certain trucks equipped with rack and pinion steering, the tie rod arms may have been incorrectly installed. The threaded end of the ball socket assembly may fracture and separate.

Risk

A fractured tie rod assembly will make the vehicle more difficult to control at higher speeds and a crash may occur.

Remedy

Dealers will inspect for installation of the steering arms. Steering components will be replaced on trucks that have incorrectly installed tie rod arms. The recall began on may 1, 2008. Owner may contact freightliner at 1‑800‑547‑0712.

Recall number 07V400000 · Recall details

What is wrong

Certain freightliner school bus chassis, heavy trucks, and thomas built school buses manufactured between july 2002 and july 3, 2007, equipped with bendix sr-7 spring brake control valves. The parker scv brass 90 degree single check valves (scv) which attach to the supply port of a bendix sr-7 spring brake modulating valve can break apart. Pieces of the parker scv can become lodged inside the sr-7 spring brake modulating valve, potentially causing either leakage out of the sr-7 valve or preventing air from properly exhausting from the sr-7 valve. Also, due to a manufacturing defect in the internal rubber check valve inside the sr-7 spring brake modulating valves, the valves can become deformed and not seat properly.

Risk

These conditions could either result in leakage and cause a delay in the application of the spring brake without warning or possibly lead to unintended vehicle rollaway or brake drag which could result in a vehicle crash, personal injury, or death.

Remedy

Freightliner will notify owners and repair the vehicles free of charge. The recall began on january 11, 2008 to freightliner, sterling, and freightliner custom chassis owners; to thomas built bus owners on february 1, 2008. Owners can contact freightliner at 1‑800‑547‑0712.

Recall number 07V302000 · Recall details

What is wrong

Certain freightliner school buses and trucks manufactured from october 23, 2004, to march 21, 2006. During the steering column manufacturing process two welds may have been missing.

Risk

Columns with two welds missing may fatigue and fracture and allow the steering wheel to progressively be moved out of its normal position which may cause the steering to respond differently than expected. If this condition is ignored, a crash may occur.

Remedy

Freightliner will notify owners and inspect and repair the affected vehicle free of charge. The recall began on august 30, 2007. Owners can contact freightliner at 1‑800‑547‑0712.

Recall number 07V289000 · Recall details

What is wrong

On certain trucks equipped with vehicle improvement steering wheels, the steering wheels may be manufactured with incorrect length huck fasteners that are too short to allow proper collar engagement on the pin. The steering wheel will feel loose on the hub for a period of time, with the subsequent possibility of a complete separation.

Risk

Steering wheel separation will result in a loss of steering control, possible resulting in a crash.

Remedy

Dealers will inspect the steering wheels for correct length huck fasteners. Steering wheels will be repaired or replaced free of charge. The recall began on may 5, 2006. Owners may contact freightliner at 1‑800‑547‑0712.

Recall number 06V006000 · Recall details