Genie TZ-34 recalls
There are 7 safety recalls on record for the Genie TZ-34, covering 5,091 vehicles in total across all the models in each campaign. Newest first.
Genie TZ-34 recalls by model year
2020 12019 12012 12011 32010 22009 22008 12007 22006 12005 12004 12003 1
All recalls
Equipment
- What is wrong
- Genie Industries, Inc. (Genie) is recalling certain 2020 TZ-34 and TZ-50 trailer mounted boom lifts. The bolts that connect the slew turntable bearing to the chassis may have been under tightened.
- Risk
- The loose bearing may affect the stability of the lift, increasing the risk of personal injury.
- Remedy
- Genie will notify owners, and Genie technicians will properly tighten the slew bearing bolts, free of charge. The recall began October 28, 2020. Owners may contact Genie customer service at 1‑800‑536‑1800. Genie's number for this recall is Issue 240.
Recall number 20V637000 · Recall details
Electrical system: 12v/24v/48v battery: cables
- What is wrong
- Genie Industries, Inc. (Genie) is recalling certain 2019 TZ-34 and TZ-50 trailer-mounted aerial devices. The battery cable ends at the quick disconnect may have been improperly crimped, resulting in possible excessive heat build-up of the conductor.
- Risk
- The excessive heat build-up can result in a fire, increasing the risk of injury at the work area.
- Remedy
- Genie will notify owners and provide a replacement quick disconnect battery cable. The recall began May 23, 2019. Owners may contact Genie customer service at 1‑800‑536‑1800. Genie's number for this recall is 190009.
Recall number 19V253000 · Recall details
Equipment
- What is wrong
- Genie Industries, Inc. (Genie) is recalling certain model year 2003-2012 TZ-34 aerial work platform trailers manufactured October 1, 2002, through July 12, 2012. In the affected trailers, the outrigger assembly may not remain stowed upright while the trailer is being transported.
- Risk
- If the outriggers do not remain stowed, the outriggers can strike objects in the trailers path, increasing the risk of a crash.
- Remedy
- Genie will notify owners, and dealers will install a new outrigger control manifold. The recall is expected to begin during November 2013. Owners may contact the Terex AWP at 1‑800‑536‑1800. Genie's recall number is SN 130009.
Recall number 13V420000 · Recall details
Equipment
- What is wrong
- Genie is recalling certain tz-34 and tz-50 trailer mounted aerial work platform booms, manufactured from january 1, 2010, through may 1, 2011, because the motor controller can fail. This component was also installed as a service part replacement on tmz 34/19 and tmz 50 units as part number 96769 and kit 99854 from january 1, 2010, through august 7, 2011. This recall is an expansion of a previous recall. Please see recall campaign number 11v‑373.
- Risk
- Failure of the motor controller can result in a fire.
- Remedy
- Genie will notify owners and dealers will repair the vehicles free of charge. The safety recall began on march 8, 2012. Owners may contact genie's service department at 1‑800‑536‑1800.
Recall number 12V022000 · Recall details
Equipment: electrical
- What is wrong
- Genie is recalling certain tz-34 and tz-50 trailer mounted aerial work platform booms, manufactured from may 02, 2011, through june 30, 2011, that are equipped with a newly designed motor controller component. This component is also installed as a service part replacement on tmz 34/19 and tmz 50 as part number 96769 and kit 99854 from april 13, 2011, through july 13, 2011. The motor controller can fail.
- Risk
- Failure of the motor controller can result in a fire.
- Remedy
- Genie will notify owners and dealers will repair the vehicles free of charge. The safety recall began on august 2, 2011. Owners may contact genie's service department at 1‑800‑536‑1800.
Recall number 11V373000 · Recall details
Equipment
- What is wrong
- Genie is recalling certain model year 2009 tz-34 and tz-50 vehicles manufactured from april 1 through august 31, 2009, equipped with trailer mounted aerial work platform booms. Material used in the platform support components was not in compliance the manufacturer's specifications.
- Risk
- This could result in cracking of the supporting structure and ultimately result in the platform falling, possibly resulting in personal injury to the operator.
- Remedy
- Genie will notify owners and repairs will be performed by authorized genie dealers free of charge. The safety recall began on august 31, 2010. Owners may contact genie at 1‑800‑536‑1800.
Recall number 10V286000 · Recall details
Structure
- What is wrong
- On certain trailer mounted aerial work platform booms, the turntable bearing bolts may not be tightened to specifications. Bolts that are under-torqued can come loose over time.
- Risk
- This could cause the turntable lift structure to separate from the chassis resulting in the platform falling increasing the risk of injury or a crash.
- Remedy
- Repair instructions will be mailed to owners advising them to torque the turntable bearing bolts to specifications. The recall began on january 14, 2008. Owners may contact genie at 1‑800‑536‑1800.
Recall number 07V558000 · Recall details
Questions about the Genie TZ-34 recalls
How do I check if my Genie TZ-34 has an open recall?
Enter your VIN in the VIN decoder on this page to see the recalls for your exact model and year, then confirm with any dealer of the brand or the manufacturer, who can tell you whether the repair was already done on your car.
Do I have to pay for a recall repair?
No. Safety recall repairs are free at any authorized dealer of the brand, even if the car is out of warranty or you are not the first owner.
How many recalls does the Genie TZ-34 have?
7, covering equipment, electrical system and structure.
VIN decoder
See the problems and recalls for an exact car
Buying a used Genie TZ-34?
Check the exact car before you pay: accidents, salvage or flood titles, odometer readings and previous owners.
Check its history