Vehicle had brake system failure while driving nearly resulting in two accidents due to an inability to deccelerate. Brake System Failure notification came on screen along with other safety warnings and a check engine light has stayed on since.
2023 GMC Canyon brakes problems
10 complaints (16% of all complaints for this car).
- owner complaints
- 10
- of this car's complaints
- 16%
- crashes
- 0
- recalls
- 0
Which part fails
Owners did not name a specific part.
At what mileage
Complaints by mileage at the time of the problem.
GMC Canyon brakes problems in other years
Related recalls
No recalls on record for this model year.
Related investigations
Electronic Brake Module Component Failure
On April 11, 2024, the Office of Defects Investigation (ODI) opened Preliminary Evaluation PE24011 after receiving complaints concerning a loss of brake assist in 2023 MY Cadillac Lyriq vehicles. These complaints allege a hard brake pedal, followed by a “Brake System Failure” message at start up or while driving. GM shared records regarding several internal investigations for loss of brake assist due to alleged spindle fractures in the eBoost system. GM has stated that in the event of a spindle fracture, anti-lock brakes (ABS), stability control, and traction control remain functional until the vehicle comes to a complete stop. At this point, ABS, brake assist, stability control, and traction control functions are lost. The loss of these functions causes the vehicle to set one of three Diagnostic Trouble Codes (DTCs) based on failed performance criteria for the Electronic Brake Control Module (EBCM). These DTCs, in turn, activate several driver alerts: an audible chime, a visual “Service Brake System” message in the display, and multiple illuminated Malfunction Indicator Lights (MILs) for the ABS, Traction Control, and Brakes informing the driver of loss of functionality. The vehicle speed will also be limited to 70 KPH (43 MPH). Since opening PE24011, ODI has continued to receive reports of loss of brake assist. Some of these reports describe symptoms inconsistent with GM’s description of a spindle failure. These reports allege an immediate loss of brake assist functionality as opposed to the loss occurring after the vehicle comes to a complete stop. The sudden loss of brake assist during a braking event could result in extended braking distance, which increases the risk of a crash or injury. ODI believes further analysis is necessary to assess the potential for failures in GM’s eBoost system to resulting in safety-related outcomes. At this time, ODI is aware of the following vehicles that are equipped with this eBoost system: 2023-2026 MY Cadillac Lyriq, Chevrolet Colorado, and GMC Canyon; 2024-2026 MY Buick Enclave, Envision; Chevrolet Blazer EV, Equinox EV, Traverse; Cruise Origin; and GMC Acadia; 2025-2026 MY Cadillac Celestiq and Optiq. ODI is also aware of 2024-2026 MY Acura ZDX and 2024-2026 MY Honda Prologue vehicles that were built with this system. The Acura and Honda vehicles were manufactured by GM in a joint venture with Honda, and will be included in the Engineering Analysis as peer vehicles. ODI is opening this Engineering Analysis to further assess the safety-related consequences of a failed eBoost system. In addition, ODI is expanding the scope of the investigation to encompass all GM vehicles that share this eBoost system. To review the ODI reports cited in the Opening Resume ODI Report Identification Number document, go to
EA26006
What 2023 GMC Canyon owners say
Most recent owner complaints, unedited.
The contact owns a 2023 GMC Canyon. The contact stated that while driving at approximately 50 MPH, the anti-lock braking system, brake warning light, low oil, low fuel, seat belt warning light, parking brake, temperature gauge, forward collision warning, and various other warning lights and messages illuminated. The contact depressed the brake pedal to the floor; however, the vehicle only decelerated to 15 MPH and failed to come to a complete stop. The instrument panel screen blacked out twice before the vehicle eventually rolled to a stop. The Forward Collision Unavailable warning message and Check Engine light then illuminated. The contact activated the hazard lights and drove at 5 MPH to a nearby parking lot. The contact stated the brakes continued to malfunction, requiring the driver to allow the vehicle to roll to a stop. The dealer was notified of the failure and confirmed there were no open recalls associated with the VIN. The vehicle was not diagnosed or repaired. The manufacturer was not notified of the failure. The failure mileage was 39,000.
Trailer brakes continuously fault due to known problem GM technical bulletin 23-NA-149 This should be a recall. Nothing but the runaround getting it fixed by GM.
While driving at 70–75 mph on an interstate, my vehicle suddenly displayed a “Brake Failure” warning and limited speed to 62 mph. Power steering failed completely, and braking became ineffective despite hard pedal pressure. Multiple warnings followed: ABS, engine, and others. I was in heavy traffic with vehicles at full speed. Loss of braking and steering control forced me to coast across lanes to the shoulder, narrowly avoiding collision. My safety and that of others was at extreme risk. After stopping, I turned the vehicle off for ~30 seconds. Upon restart, all systems returned to normal—no warnings or issues. This indicates a transient software malfunction, not mechanical failure. No prior warnings or symptoms occurred. The problem has not been reproduced or confirmed by a dealer/service center. I have not scanned or inspected the vehicle. It has not been examined by the manufacturer, police, or insurance. The vehicle is in my possession and available for inspection upon request.
While driving at 70–75 mph on an interstate, my vehicle suddenly displayed a “Brake Failure” warning and limited speed to 62 mph. Power steering failed completely, and braking became ineffective despite hard pedal pressure. Multiple warnings followed: ABS, engine, and others. I was in heavy traffic with vehicles at full speed. Loss of braking and steering control forced me to coast across lanes to the shoulder, narrowly avoiding collision. My safety and that of others was at extreme risk. After stopping, I turned the vehicle off for ~30 seconds. Upon restart, all systems returned to normal—no warnings or issues. This indicates a transient software malfunction, not mechanical failure. No prior warnings or symptoms occurred. The problem has not been reproduced or confirmed by a dealer/service center. I have not scanned or inspected the vehicle. It has not been examined by the manufacturer, police, or insurance. The vehicle is in my possession and available for inspection upon request.
The contact owns a 2023 GMC Canyon. The contact stated that while driving 20 MPH, the vehicle came to an abrupt stop without warning. The contact waited for several minutes before resuming normal driving. The contact stated that the failure was caused by the rear brakes. The vehicle was not diagnosed or repaired. Neither the manufacturer nor the dealer was notified of the failure. The failure mileage was 14,129.
Since I purchased the vehicle it’s had the issue of it braking on its own. I brought this up to GMC many times. At the beginning they had me try to duplicate it with them, which I thought would be unsafe. They only acknowledged the problem and attempted repairs after I contacted GMC directly. The issue with the crash alerts while driving always stayed, even though there was nothing in front of me. Just recently it started braking on its own again in traffic. This has caused bodily and property damage, luckily nothing grave. I do not feel safe in the vehicle and gave gmc many attempts at fixing such a serious issue. I want them to tow replace the vehicle and provide a loaner. Please contact me if you need more details. [XXX] [XXX] INFORMATION REDACTED PURSUANT TO THE FREEDOM OF INFORMATION ACT (FOIA), 5 U.S.C. 552(B)(6)
The contact owns a 2023 GMC Canyon. The contact stated that when applying the brake pedal, the steering wheel would begin shaking. The computer on the center council that displays information, had blacked out. The vehicle was taken to the dealer who diagnosed that the brake pads had failed. The dealer had completed a software update for the main computer however the failure persisted. The vehicle was not repaired due to the brake pads (Part Number 87850375) not being in production for repairs. The failure had become more persistent and now the brakes have failed. The dealer was contacted and confirmed that the part for the repair was unavailable even for purchase. The parts were on national backorder. The vehicle had not been repaired. The manufacturer was made aware of the failure by the dealer and the manufacturer confirmed that the part was unavailable. The failure mileage was unknown.
Vehicle only two months old with 2000 miles. Service engine light and brake assist service light activated. GMC dealer states brake master cyclinder failure and vehicle should not be driven. Vehicle left at dealer while awaiting replacement master cyclinder. Unknown if this is a widespread problem causing brake failures in GMC and Chevy new model Canyons and Colorados.
The contact owns a 2023 GMC Canyon. The contact stated that the vehicle had experienced several electrical failures and would fail to start due to a faulty battery. The contact stated that after the manufacturer remotely completed an unknown electrical update on the vehicle, the vehicle started experiencing several failures including a rearview camera, door locks, brakes, and power steering failures. The contact stated that while driving at approximately 5 MPH and depressing the brake pedal, the message "Power Brake Assist" and "Power Steering" were displayed. Additionally, the brake pedal went down to the floorboard, and the vehicle failed to respond immediately. The contact also stated that the vehicle lost power steering functionality. The vehicle was later taken to the local dealer, where it was diagnosed that the failure was related to the electrical system; however, the dealer could not repair the vehicle. The manufacturer was notified of the failures, but no assistance was provided. The failure mileage was 2,500.
Questions about the 2023 GMC Canyon brakes
Does the 2023 GMC Canyon have brakes problems?
Owners have filed 10 complaints about the brakes of the 2023 GMC Canyon, 16% of all its complaints.
At what mileage do 2023 GMC Canyon brakes problems start?
Not enough complaints include the mileage to tell.
Was there a recall on the 2023 GMC Canyon brakes?
There is no recall for this problem on this model year.
What year does the GMC Canyon have bad brakes?
The GMC Canyon model years with the most brakes complaints are 2005 (21 complaints), 2024 (14 complaints) and 2006 (11 complaints).
Other 2023 GMC Canyon problems
Driver assistance 24Electrical 20Engine 10Transmission 7Lights 5Body 4Acceleration 3Steering 3Visibility 3Airbags 2Fuel system 1Suspension 1
VIN decoder
See the problems and recalls for an exact car
Buying a used 2023 GMC Canyon?
Check the exact car before you pay: accidents, salvage or flood titles, odometer readings and previous owners.
Check its history