The contact owns a 2021 GMC Canyon. The contact stated that while reversing, the back over prevention screen image was solid blue, and there was no image displayed, creating a visibility hazard for the driver. The vehicle was taken to the local dealer, and it was determined that the rearview camera coaxial cable connectors were faulty and needed to be replaced. The vehicle was not yet repaired. The manufacturer was notified of the failure and informed the contact that the vehicle was not included in the federal safety agency Campaign Number: 22V709000 (BACK OVER PREVENTION). The contact stated that the vehicle had experienced the failure listed in the recall. The failure mileage was 46,000.
GMC Canyon backup camera problems
11 of the 1,443 owner complaints about the GMC Canyon describe backup camera failure, most of them for the 2023 model year.
- owner complaints
- 11
- worst model year
- 2023
- typical mileage
- 4,500
By model year
- 20233
- 20212
- 20182
- 20171
- 20162
- 20151
Often reported together
Headlights 2Power steering loss 1Loss of power 1Screen failure 1Door locks 1
What owners say
The screen in the Truck doubles in picture, freezes and/or shuts down completely. This leaves you with out control of your GPS, radio, blue tooth, head light control and backup camera. Research on the internet has proven this seems to be an accruing problem in this truck, with some even losing their speed information. So far it has resolved itself after a while on its own, thankfully, but each time it happens the black out is lasting longer. In order for the dealership to recognize this problem we must drive to them when its occurring, which hasn't been possible. Owning this truck for 2 months and the issue of losing the computer system has occurred 4 times, this vehicle is not a daily driver.
When placing the vehicle in reverse, the infotainment screen goes to full brightness on the reverse camera, making it difficult to see at night by lighting up the cabin causing interior reflections when trying to see out the windows at mirrors or behind the vehicle. There is no way to adjust the brightness setting. This is a pointless feature as the camera becomes the required visual point and is sometimes obscured by dirt or water so the driver is forced to fight the bright useless screen to see out the windows.
GM is pushing updates over the air that are permanently disabling the backup camera by damaging the camera control module. Not sure yet how long we’ll have to wait for the part. I’ve heard of many that have been waiting months. They should not be pushing out defective software when it takes out the safety equipment.
The contact owns a 2023 GMC Canyon. The contact stated that the vehicle had experienced several electrical failures and would fail to start due to a faulty battery. The contact stated that after the manufacturer remotely completed an unknown electrical update on the vehicle, the vehicle started experiencing several failures including a rearview camera, door locks, brakes, and power steering failures. The contact stated that while driving at approximately 5 MPH and depressing the brake pedal, the message "Power Brake Assist" and "Power Steering" were displayed. Additionally, the brake pedal went down to the floorboard, and the vehicle failed to respond immediately. The contact also stated that the vehicle lost power steering functionality. The vehicle was later taken to the local dealer, where it was diagnosed that the failure was related to the electrical system; however, the dealer could not repair the vehicle. The manufacturer was notified of the failures, but no assistance was provided. The failure mileage was 2,500.
The rear camera and wire harness for the Rear Backup Camera became corroded and stopped working months ago. This is vital technology that our children have grown up with to ensure the safety of backing up in case something is behind the vehicle including young children, toys, equipment or someone simply walking by your driveway while you're backing up. The Service Manager at Billion GMC in Sioux Falls, SD (Dan Dunnagan) said they are replacing tons of the rear cameras due to corrosion, which might be caused by water getting into the system or faulty parts and faulty wiring from the product manufacturer. This is certainly a safety issue. I had it repaired at a cost of $591.84 for the rear camera and wire harness plus labor. This issue on GMC Canyon and Sierra 1500 pickups should be investigated as the Rear Camera is a vital piece of safety equipment and if a large number of these are faulty, subject to corrosion or poor manufacturing, it should be brought forward to protect consumers.
The central control screen goes through a rapid, seemingly random series of "ghost touch" control changes. It cannot be stopped or shut down. It often changes the language of all screens in the vehicle (I cannot read French), shifts the instrument panel screen from speedometer to any of a large number of random screens, changes rear camera settings or deactivates it, changes bluetooth and telephone settings, and any of dozens of other actions many of which have a direct and immediate impact on vehicle safety. It serves as a terrible driver distraction because the driver has to do whatever they can to keep the screen from making unsafe changes to the vehicle settings. The driver's attention is divided between whatever the screen is doing and what is happening on the road.
Purchased this vehicle brand new and paid extra for Nav and a backup camera as I am a disabled Veteran! Currently have 32000 miles or so as i don't drive that much. No other lights or warnings came up before the following happened. Recently the radio stopped playing and the infotainment system went blank. It occasionally pops up a screen that says waiting on update, other than that it stays blank most of the time. The backup camera comes on intermittently but not always when backing up, maybe 1 out of every 5 times. Also the bluetooth went dead since this all started. As a disabled Vet I depend on the backup camera and built in Navigation so this is an issue! Called the dealer and 3 other radio and entertainment car stores and they stated this is a know issue and would cost around $1000 to $1200 to replace the HMI 2.5 module behind the dash which is the known issue. Looking online this is a well known and common issue and GMC has bulletins to diagnose but no free or discounted replacement or repair, even though it's all over the internet that GMC and Chevy Infotainment centers have issues. There is a class action lawsuit going on due to this issue as well. I'm sure there are others that just haven't complained and should be fixed by the dealer.
At night, the back-up camera display on the dash is so bright, it lights up the whole cab and this causes the driver not to be able to see anything outside the cab or around the vehicle when reversing. I almost backed over my wife because I could not see her because of the brightness. There is no way to adjust the brightness when it is in reverse and in the dark you can not see much in the screen because of the brightness. I took it to the dealer and he said they have seen this problem on the full sized trucks but not the mid-sized and he said it was in working condition. I feel this is very dangerous if you can't see when you are reversing.
I have a friend who has a 2016 gmc canyon where the radio/onstar/rear view camera etc cuts out after a short operation time -- my friend has taken it to the dealer with no results. My fiend is elderly and does not have a computer that is why I am doing this for him. The back-up camera does not operate when the radio/onstar/camera cuts out. The operation of the vehicle is stationary, in motion, on a city street or a highway, turning
Related recalls
Electrical system: ADAS: driver monitoring: camera/sensor
- What is wrong
- General Motors, LLC (GM) is recalling certain 2023 Chevrolet Colorado and GMC Canyon vehicles. The front camera module (FCM) system may falsely detect an obstacle, causing the automatic emergency braking (AEB) to engage unexpectedly.
- Risk
- Unexpected automatic emergency braking can cause the vehicle to abruptly stop or slow down, increasing the risk of a crash.
- Remedy
- Dealers will update the front camera module (FCM) software, free of charge. Owner notification letters were mailed April 5, 2024. Owners may contact GMC customer service at 1‑800‑462‑8782 or Chevrolet customer service at 1‑800‑222‑1020. GM's number for this recall is A232424660.
Recall number 24V133000 · Recall details
Questions about the GMC Canyon backup camera
Which GMC Canyon years have backup camera failure problems?
The model years with the most reports are 2023 (3 complaints), 2016 (2 complaints) and 2018 (2 complaints).
VIN decoder
See the problems and recalls for an exact car
Buying a used GMC Canyon?
Check the exact car before you pay: accidents, salvage or flood titles, odometer readings and previous owners.
Check its history