2017 GMC Sierra 1500 engine problems

Filed Sep 11, 2026 · Engine, Transmission · OR

The catastrophic power failure with no warning on my 2017 GMC Sierra, at 87450 miles completely contaminated the engine oil cooling lines with metallic debris and fractured structural mounts. The servicing dealership replaced the transmission but is refusing to remediate the engine line contamination without out-of pocket payment. The vehicle cannot be safely operated without causing terminal engine failure on the highway, creating a imminent mechanical and traffic safety hazard.

Filed Aug 28, 2026 · Engine · LA

I had an engine rebuilt completed on my L86 2017 GMC 6.2. After the repair, the engine failed due to the crank shaft on the engine being oversized which is the same problem that GM is having with the L87 engines. When the crank was ordered from the dealer for my L86, the only part number for the crank that was available was the new part number that was being used in the L87. Seems the same cranks were used in both engines and this recall on the L87 should be extended to anyone that had a rebuilt complete. Me and my family were left on the side of the road for a few hours which endangered our lives. The problem was determined by an independent service center and was fixed by the purchase of new parts and aftermarket bearings for the crank to allow the oil to enter the crank properly. There were no warning signs. Was driving down the road, started to hear a noise and then the engine started to over heat so that is when I stopped and called a wrecker.

Filed Apr 19, 2026 · Engine · CT

I drive this vehicle on higher speed roads to work everyday. Roads also used by large tractor trailers and like larger vehicles. I was told by dealer that I had broken exhaust manifold studs at a previous oil change. While driving the truck it seemed to lose power for a short time but I was in traffic and assumed the loss of power at that time was related to a possible exhaust leak.I scheduled a appointment to have the repairs addressed. When I picked up the vehicle I was told that there was a ticking noise in the top of the motor. They stated it was the lifters and needed to be repaired for $7136 dollars. I researched the problem and found out how big of an issue this is specifically for the owners of the 6.2l (L86) engine. Highly concerned I schedule the repair and dropped the vehicle off. Shortly after the dealer called and stated the vehicle had bent push rod collapsed lifters damage to the cylinder head, camshaft and worn camshaft bearings now cost are $14350 or replace engine for $17000. I chose to replace top end. The next day I was called back and was told the bearing on the cam journals were down to brass and I would need new engine. Cost in just 24 hours not are $22000. This vehicle was maintained by this dealer also for all fluid changes. The belief is all the failures were related to the active fuel management system. (going from 8 to 4 cylinders ).

Filed Mar 31, 2026 · Engine · 99,700 miles · NC

The contact owns a 2017 GMC Sierra 1500. The contact stated that while driving at an undisclosed speed, there was an abnormal tapping sound coming from the vehicle. The check engine warning light and an unknown warning light were illuminated. The contact stated that the failure had occurred while traveling out of state. The dealer was made aware of the failure, and the contact was informed that the repair was not covered under recall. The vehicle was towed to an independent mechanic, where it was diagnosed with lifters failure. The contact was informed that the lifters and camshaft needed to be replaced. The contact was informed that the lifter's failure had damaged the camshaft. The vehicle was being repaired. The manufacturer was not made aware of the failure. The failure mileage was approximately 99,700.

Filed Feb 4, 2026 · Engine, Transmission · VT

check engine light and traction control light on. vehicle undriveable. took to dealer code P0304 lifters need to be replaced

Filed Jan 28, 2026 · Engine · LA

My L86 Engine had 250,000 plus miles and the engine went out. So we decided to rebuild the engine due to the truck being paid off and the cost of a new engine is much cheaper than a new truck. After the first rebuild the engine last around 10K miles. We pulled the engine back apart to find out that the crank bearings were shot along with the brand new GM crank that was purchased. After doing research, there was no enough clearance between the GM bearings and the GM crank. Basically the same issue that the L87 is having. After doing more research it determined by the part number on the crank and the part number GM provides on their website that the L86 and the L87 (engine with current recall) take the same crank. Therefore my L86 due to GM only making the L87 crank now and it replaces the original L86 crank we had to replace the engine a second time. I believe this relevant to all the L87 issues and any L86s that are being rebuilt. We ended up having to purchase aftermarket crank bearings to get the correct clearance on the second new GM Crank that was purchased. Truck is now running good now.

Filed Jan 19, 2026 · Engine · TX

6.2L lifter failure camshaft destroyed. Complete top end rebuild cost me $8500. Same problem as the previous recall.

Filed Dec 30, 2025 · Engine, Transmission · 80,000 miles · MD

The contact owns a 2017 GMC Sierra 1500. The contact stated that while driving at an undisclosed speed, the vehicle jerked and slammed into the intended gear. The check engine warning light illuminated. The contact stated that the failure had persisted, and the vehicle had failed to accelerate as intended while depressing the accelerator pedal. The contact stated that the drive was rough, and there was an abnormal rumbling sound coming from the engine. The contact stated that the engine misfired. The vehicle was taken to several unknown locations for diagnostic tests, and it was confirmed that the transmission and the engine had failed. The contact was informed that metal shavings were found in the transmission fluid. The vehicle was not repaired due to the cost. Â The contact was provided with the manufacturer's TSB Number: 20-NA-138; however, the vehicle was not covered. The manufacturer was notified of the failure; however, the manufacturer was unable to locate the Warranty Administration Service Bulletin. The manufacturer referred the contact to the federal safety agency Hotline for assistance. The failure mileage was approximately 80,000.

Filed Dec 1, 2025 · Engine · 126,581 miles · PA

The contact owns a 2017 GMC Sierra 1500. The contact stated that while driving at an undisclosed speed, there was a tapping sound coming from the engine compartment, with the check engine warning light illuminated. The contact also stated that the vehicle lost motive power. The vehicle was towed to the dealer, where it was diagnosed, and determined that the lifter rod had failed and needed to be replaced. The vehicle was repaired. The manufacturer was not made aware of the failure. The approximate failure mileage was 126,581.

Filed Oct 9, 2025 · Engine · AR

Truck was in park idling and it started to run really rough so I turned it off. Wouldn’t start again. Now it needs a new motor.