We purchased the 2002 yukon from mcguire dealership in nj its been cared for taken to the dealership faithfully driven by my 50 year old father, when first driving he noticed the pedal vibrating rapidly during normal brake applications. The ABS control valve was the culprit along with a rusty wheel sensor. It was replaced at the dealer and after 5 years the frame of the truck is rusting and rotting along with suspension parts and most of all the brakes. We came close to crashing one day when the pedal went straight to the floor, we take it to the local firestone and they tell us all the brake lines are rusted out along with the master cylinder. We replaced the lines and master cylinder with a hefty price tag. We get the car back 3 days later pedal goes to the floor again, back at the mechanic both rear calipers are rusted and leaking. We replaced all 4 calipers and the problem stopped but now the frame is rusting and the ABS is still vibrating badly. Long story short gm needs to be held accountable for selling such cheap crappy trucks, we came close a few times to crashing, and I feel sorry for the people that have lost their lives due to the negligence of the employees of gm.
2002 GMC Yukon XL: brake failure
6 of the 95 complaints about the 2002 GMC Yukon XL describe brake failure.
- owner complaints
- 6
- of this car's complaints
- 6%
- typical mileage
- 50,000
- recalls
- 1
Brake failure by model year
What owners say
Stepped on brake pedal and brakes failed to stop vehicle. Inspected vehicle and noticed rusted brake lines failed.I am the original owner of this vehicle.
Dt*: the contact stated the parking brake failed to pass inspection. The vehicle was taken to the dealer where the parking brake was replaced.
Parking brake failure. Parking brake no longer holds vehicle in place. Dealer claims linings wore prematurely. Parts were not in stock, so waiting for repair. Very similar to parking brake recall on 2001 gmc sierra pickup recall #05v161000.
During 2004 state vehicle emissions and safety inspection it was determined that the parking brake did not work. As a result vehicle failed inspection and will not pass until issue resolved. When parking brake is pressed, the pedal easily reaches the floor and does not hold vehicle. Gmc customer assistance notified 01/25/05. Not sure on resolution. Dealer wants to replace entire rear brake assembly, quote high cost for work, not covered under extended warranty, dealer blaming on normal wear and tear. Inspection place commented on similar issues with all other gmc yukon 2002 model.
During 2004 state vehicle emissions and safety inspection it was determined that the parking brake did not work. As a result vehicle failed inspection and will not pass until issue resolved. Gmc customer assistance notified 12/21 and diagnosis and repair to begin 12/22. When parking brake is pressed, the pedal easily reaches the floor and does not hold vehicle.
Service bulletins that may apply
- Service brakes, hydraulic: pedals and linkages
- This informational bulletin is to inform dealers of an improved service strategy to aid in the replacement...
- Chevrolet/gmc/cadillac: anytime hydraulic brake pipes assembly need replacing, pre-formed and pre-flared...
- Service brakes, hydraulic
- This informational bulletin provides information on brake line kits now available and how to service them...
- Service brakes
- ABS light on, dtc's C0265, C0201, U1041 set and/or loss of communication with brake module
Related recalls
Service brakes, hydraulic: antilock/traction control/electronic limited slip
- What is wrong
- Certain pickup trucks and sport utility vehicles may experience unwanted antilock brake system (ABS) activation. This condition is more likely to occur in environmentally corrosive areas. This recall will be launched in the "salt belt" states of connecticut, delaware, illinois, indiana, iowa, maryland, massachusetts, maine, michigan, minnesota, missouri, new hampshire, new jersey, new york, ohio, pennsylvania, rhode island, vermont, west virginia, wisconsin and the district of columbia only.
- Risk
- This can cause increased stopping distances during low-speed brake applications, which could result in a crash.
- Remedy
- Dealers are to remove the wheel speed sensor and thoroughly clean the wheel speed sensor mounting surface on the bearing, apply rust inhibitor to the cleaned surface, grease the mounting surface, reinstall the wheel speed sensor, and check the peak-to-peak output voltage to ensure the wheel speed signal is within specifications. The recall began september 22, 2005. Owners may contact chevrolet at 1‑800‑630‑2438 or gmc at 1‑866‑996‑9463.
Recall number 05V379000 · Recall details
Questions about the 2002 GMC Yukon XL brake failure
Is brake failure a common problem on the 2002 GMC Yukon XL?
6 of 95 owner complaints about the 2002 GMC Yukon XL (6%) mention brake failure. The model year with the most reports is 2001.
Is there a recall or service bulletin for this on the 2002 GMC Yukon XL?
There is 1 recall and 13 service bulletins for the same area of the car. Check them below with your VIN.
Other symptoms on the 2002 GMC Yukon XL
VIN decoder
See the problems and recalls for an exact car
Buying a used 2002 GMC Yukon XL?
Check the exact car before you pay: accidents, salvage or flood titles, odometer readings and previous owners.
Check its history