Abs system is not functioning properly, codes are being thrown for multiple things such as cylinder 2, which all spark plugs and coils and spark lines were fixed, then it ran for one day and threw a different code of cylinder 6 misfire with the abs and stailitrx system not functioning correctly. Several parts have been changed on this by professionals and they can’t figure out why this is happening. I don’t have my full hp.
2016 GMC Yukon brakes problems
55 complaints (20% of all complaints for this car). Typical mileage when it fails: 54,000. 2 crashes reported.
- owner complaints
- 55
- of this car's complaints
- 20%
- typical mileage
- 54,000
- crashes
- 2
- recalls
- 1
Which part fails
Owners did not name a specific part.
At what mileage
Complaints by mileage at the time of the problem.
0k-25k
25k-50k
50k-75k
75k-100k
100k-125k
125k-150k
150k-175k
175k-200k
200k+
GMC Yukon brakes problems in other years
Specific symptoms reported on the 2016 GMC Yukon brakes
Phrases found in the owners' own descriptions, so one complaint can mention several symptoms.
Related recalls
Service brakes, hydraulic: power assist: vacuum
- What is wrong
- General Motors LLC (GM) is recalling certain 2015-2017 Cadillac Escalade, 2014-2018 Chevrolet Silverado, GMC Sierra, 2015-2018 Chevrolet Suburban, Tahoe, GMC Yukon vehicles. The amount of vacuum created by the vacuum pump may decrease over time.
- Risk
- As the vacuum level drops, the brake assist decreases, increasing braking effort, extending the distance required to stop the vehicle, thereby increasing the risk of a crash.
- Remedy
- GM will notify owners, and dealers will reprogram the Electronic Brake Control Module, free of charge. The recall began October 8, 2019. Owners may contact Chevrolet customer service at 1‑800‑630‑2438, Cadillac customer service at 1‑800‑458‑8006 or GMC customer service at 1‑800‑462‑8782. GM's number for this recall is N192268490.
Recall number 19V645000 · Recall details
Related investigations
Brake Vacuum Pump Failure
On November 20, 2018, the Office of Defects Investigations (ODI) opened PE18-012 to investigate instances of sudden onset of a hard brake pedal that could result in extended stopping distance due to an issue with the brake assist vacuum pump in model year (MY) 2014 through 2016 GMC Sierra 1500 and Chevrolet Silverado 1500 series pickup trucks and MY 2015 through 2016 Cadillac Escalade, Chevrolet Suburban, Chevrolet Tahoe, and GMC Yukon SUVs.If the brake assist vacuum pump fails to operate as intended, the amount of brake power assist supplied to the driver can be significantly reduced, extending the subject vehicle stopping distance. GM stated that the root cause of pump failures was due to foreign debris such as oil sludge in the engine oil. GM stated that this debris can become trapped by the oil inlet filter screen. Under normal operation, this screen allows a small amount of oil into the brake vacuum pump. The foreign debris can, over time, clog the pump which can cause a loss of lubrication and a reduction in the amount of vacuum produced leading to a hard pedal and extended stopping distance.On December 13, 2018, GM issued a Special Coverage (N182202780) for the brake vacuum pump issue in MY 2014-2017 trucks and 2015-2017 SUVs on the K2XX platform for 6 years or 72,000 miles. Special Coverage repair includes the replacement of the vacuum pump and vacuum pump belt. Consumers received notification of the coverage via mail. On September 6, 2019, GM notified the federal safety agency that it was conducting safety recall 19V‑645 which reprograms the electronic brake control module (EBCM) and included approximately 3.5 million trucks and SUVs. In October 2019, GM extended the terms of special coverage N182202780 to 10 years or 150,000 miles as well as now including the entire scope of recall 19V‑645. In October 2020, GM expanded the scope of coverage N182202780 to include the MY 2018 Escalade and 2019 Tahoe.The remedy implemented in GM recall 19V‑645 appears to be sufficient in addressing the safety-related concerns of this issue. Loss of vacuum assist now occurs at a progressive rate as well as there being a more timely warning of a brake problem to the driver through the driver information center (DIC). In view of the recall action and revision to the special coverage, this Preliminary Evaluation is closed. The agency reserves the right to take additional action if warranted by new circumstances. The ODI reports cited above are available for review online at under the identification numbers in the attached document.
PE18012
What 2016 GMC Yukon owners say
Most recent owner complaints, unedited.
The contact owns a 2016 GMC Yukon. The contact stated that while driving at an undisclosed speed, the brake pedal was depressed; however, the vehicle failed to stop as intended. The contact stated that there was an abnormal sound coming from the vehicle and the ABS warning light was illuminated. The contact stated that after several attempts, the vehicle stopped. The vehicle was taken to the dealer; however, the vehicle was waiting to be inspected. The contact stated that an unknown recall repair with a similar description was completed in 2024; however, the contact was informed that the repair was not covered under warranty. The manufacturer was made aware of the failure but provided no assistance. The failure mileage was approximately 136,000.
The contact owns a 2016 GMC Yukon. The contact stated that while driving at an undisclosed speed, the brake pedal became inoperable and failed to engage properly, with no warning lights illuminated. The contact also stated that while the vehicle was parked, excessive force was needed to engage the brake pedal and stop the vehicle. The contact stated that the failure nearly caused the vehicle to collide with another object. The dealer was not contacted. The vehicle was not diagnosed or repaired. The manufacturer was not made aware of the failure. The failure mileage was approximately 108,959.
Engine light keeps appearing and when checked it shows catalytic converter needs replaces and its sensors need replaced. Brake light has short in it and I repaireable
Transmission failure, hard shifting, slipping and loss of power also severe shuddering. Very dangerous driving. I had to have the transmission replaced after taking the vehicle to a dealership and upon verification from same dealership reproducing the transmission failure. Massive financial loss, dealership stated these transmissions are known to fail. Manufacturer has been notified by numerous complaints. Compensation is warranted
On two occasions while driving at low speed, my vehicle braked on its on a pulled hard to the left; the stabilitrac indicator also popped on briefly. I went online to determine if there were any recalls on my vehicle and found that one of the recalls on the 2016 Yukon was the exact issue happening with my vehicle. I checked my VIN and found that my vehicle was not one of the vehicles with this issue. I called GM to see if my vehicle had just not been published yet. I explain the situation too the customer service person; she understood my situation and informed me that until my specific VIN in identified with this issue, there's nothing that can be done. I'm thinking that until an accident happen because of this issue, there is nothing that can be done. I read that my issue was a problem with the EBCM, which needs to be reprogrammed. I thank you for any assistance with this issue.
There's alot of time while I'm driving in line going slowly and break pedal become hard and it will seem like the truck it's not stopping.
I was driving my car monday and I almost crash with the car in front of me the brakes doesnt work and then in the panel start lights of the engine the supension light and sigh saying brake asistant, the car is park because the brakes and I look for recalls and I call gmc and they says that I dont have any recall but I almost die monday because the vacum pump for the brakes fail and all the lights in the pannel start light up.
My brakes are not working properly. I can be backing up and put my foot on the brake. My truck will keep moving until I apply a lot of pressure on the brake pedal. I can be backing up and my truck will automatically brake and stop moving. I have to cut the truck off, start it back up for it to move. I was in a stand still traffic jam and braking a lot and my truck did stop it keep rolling. Sometimes when I apply the brake it slides.. This is the third time I have put it in the shop. I changed the brakes, brake sensor and replaced tires. I am scared to drive it. My truck is currently in the shop now for the brakes. please help.
The car has all of a sudden had issues with the gas and breaking. When I press the gas, it stalls then rapidly accelerates. It has to be the transmission. Also, is making a noise and will barely drive when pressing on the gas. It does not accelerate!! Could have easily gotten into a car accident! What is going on??
Questions about the 2016 GMC Yukon brakes
Does the 2016 GMC Yukon have brakes problems?
Owners have filed 55 complaints about the brakes of the 2016 GMC Yukon, 20% of all its complaints.
At what mileage do 2016 GMC Yukon brakes problems start?
The typical (median) mileage in owner complaints is 54,000 miles.
Was there a recall on the 2016 GMC Yukon brakes?
Yes, 1 recall: 19V645000. Check your VIN to see if your car still needs the free repair.
What year does the GMC Yukon have bad brakes?
The GMC Yukon model years with the most brakes complaints are 1999 (113 complaints), 2001 (92 complaints) and 2015 (90 complaints).
Other 2016 GMC Yukon problems
Lights 104Electrical 53Transmission 36Engine 34Driver assistance 10Steering 10Fuel system 7Suspension 7Acceleration 6Body 5Airbags 4Seat belts 2Visibility 2Seats 1Tires 1Wheels 1
VIN decoder
See the problems and recalls for an exact car
Buying a used 2016 GMC Yukon?
Check the exact car before you pay: accidents, salvage or flood titles, odometer readings and previous owners.
Check its history