2013 Hino NV8J technical service bulletins
92 technical service bulletins and manufacturer communications cover the 2013 Hino NV8J.
Bulletins tell dealers how to fix known problems. A warranty extension means the manufacturer pays for that repair for longer.
- After connecting to a truck using DX3, it may be necessary to review or create a DX Diagnostic Report for...
- This article will provide dealership technicians with information on how to open a tech assist case and...
- SA-14-026
- Sb - 05 - 004 speedometer recalibration.
- SB-16-022 A subject vehicle may experience an external fuel leak from the burner atomization module...
- SB-16-021 correction of workshop manual for HINO600 series
- SB-16-015
- SB-16-007
- SB-16-006
- SB-16-010
- 13-008
- Addition of detailed explanation of the fuel pipe installation.
- TT-16-001
- SB-15-032
- SCB-006-15 1) dpr
- SB-15-031
- AA0F0 DPR clogging may occur due to an increase in the amount of soot in the exhaust gas as a result of...
- TT-15-016
- SB-15-019
- SB-15-026 A subject vehicle may exhibit an engine oil leak or engine coolant leaking externally from the...
- TT-15-014
- SB-13-009
- SB-15-022
- SB-15-016
- SB-15-011
- SB-15-014 correction of workshop manual for 2011MY-2014MY (addition and correction of burner system)
- SB-15-010
- SB-15-002 correction of workshop manual for 2013 - 2015MY (revision of troubleshooting procedure for the...
- SB-15-003 correction of workshop manual for hino 2015MY (revision of troubleshooting procedure for the DTC...
- TT-14-033
- When replacing an engine block with service part no., 11401E0380 there is potential that 2 rear oil...
- SB-14-029 correction of workshop manual for 2011 - 2015 my.
- SB-14-028 correction of workshop manual for 2011- 2015 my.
- SB-14-020
- When replacing a broken hood grille, an enhanced replacement hood grille is available
- SB-14-016
- SB-14-014
- Subject vehicles may exhibit a concern where manual regeneration does not complete within one hour of...
- SB-14-013 "DPR damage", "Burner misfire due to excessive soot on the burner igniter surface", and "DPR...
- DPR damage, "Burner misfire due to excessive soot on the burner igniter surface", and "DPR push out" may...
- SB-14-007 procedure for auto regeneration is possible but not manual regeneration.
- TT-14-016
- TT-14-017
- Exhaust Combustion Chamber with Loose Insulation
- Bendix® Air Dryer Service
- SB-14-005 2011MY-2015MY
- RCB-005-14
- SB-14-003
- RCB-004-13
- SB-14-025
- Subject vehicles may exhibit electrical symptoms which can include, but are not limited to erratic...
- A-15-008 A subject vehicle may experience DPR (Diesel Particulate Reduction) system related issues in...
- Ice accumulation on the EGR (Exhaust Gas Recirculation) butterfly plate with a repeat P1604 DTC...
- 14-002 electrical issues or false starter engagement due to coolant intrusion into junction box
- Coe hybrid safety equipment, tools and practices
- 13-014
- 13-008
- 13-006 correction of workshop manual.
- 13-007 correction of workshop manuals.
- 13-005 correction of workshop manual.
- 13-003
- Hino trucks: malfunction indicator lamp (MIL) may be illuminating
- RCB-002-13 ECU
- Sb -13 - 001
- Sb -13 - 001
- Hino: soot accumulates on the igniter
- RCB-001-13
- 13-001 SCR coolant hose clamp.
- Hino: software update for burner control unit (BCU)
- 12-004 "Exhaust Gas Temp" (DPR Outlet) Reading Error
- Subject vehicles
- SB-12-002
- 12-001
- 12 - 002
- Some engines may erroneously record a P202E DTC in the DCU along with a P204F in the ECU. This fault...
- Sb - 08 - 005
- 07 - 006 voltage drop test
- Sb ? 06
- Sb ? 06
- 05 - 011 corrections to workshop manuals for J08 engines.
- Sb ? 05
- Sb ? 05
- Sb ? 05
- Sb - 05 - 005 proper maintenance procedures for grease lubricated front axles
- Sb - 05 - 003
VIN decoder
See the problems and recalls for an exact car
Buying a used 2013 Hino NV8J?
Check the exact car before you pay: accidents, salvage or flood titles, odometer readings and previous owners.
Check its history