Honda Prologue harsh shifting problems

Filed Jul 1, 2026 · Transmission · NC

Both front axels have been making loud clicking noise and clunking vibration while turning since the vehicle roughly reached 2000 miles. The vehicle was taken into Honda Auto Center of Bellevue, and I was told that is was a known issue, Honda was no longer allowing warranty replacements of axels and that is was "just a noise the car will make".

Filed Jun 18, 2026 · Driver assistance, Transmission · WA

My 2024 Honda Prologue (VIN [XXX]) only has 16K miles on this vehicle. Both front half-shaft CV joints are failing and have been failing for the last SEVERAL months by manifesting a persistent and worsening very loud clicking when loading and unloading the drive-train, driving up hill and executing any type of turn maneuver. I've complained numerous times to the Honda Dealership here in Seattle start 4Q 2025. They informed me that this has been an ongoing "known" problem with this specific model over the entire model 3 year offering from 2024-26, but at that time Honda America had no revised part number to effectively mitigate the problem. They initially replaced the failed CV half-shafts with the same part number, only to have those parts fail again. Honda America subsequently instructed all Honda dealerships maintenance depts to stop replacing these parts until a newly revise part number is released. I was instructed to contact Honda America at their national customer service at 800‑999‑1009. (My Case # [XXX]). I've spoken with at least 20-30 difference Honda reps over the last 6 months with no commitment to do anything to fix this potentially dangerous problem. When the outer CV joint completely fails, it could potentially turn into a pole-vault stick and literally flip the car at freeway speeds and definitely cause a catastrophic loss of control at freeway speeds or at any velocity/momentum whatsoever. The very disappointing fact is there is NOW a revised/vastly improved Part Number (Honda Part #86284282) that offers customers a fix to this very well known problem. Honda has not officially issued a recall so dealers are not able to perform this fix under warranty. My friend has this same car and her 2024 Honda Prologue is making this same exact clunking noise. She's faced with the same dilemma. Please, we all need your advocacy to get Honda America to act, not to cower and ignore the issue. Thank you for your advocacy! [XXX] INFORMATION REDACTED PURSUANT TO THE FREEDOM OF INFORMATION AC

Filed May 5, 2026 · Transmission · NC

The driver's side CV axle has developing a clunking noise.

Filed May 4, 2026 · Steering · CA

My 2025 Honda Prologue is experiencing a consistent knocking/cracking noise when turning the steering wheel at low speeds, particularly during tight turns such as parking or exiting driveways. The noise appears to originate from the front axle or wheel area and is most noticeable when accelerating slightly while turning. The sound can be described as a series of clicks, pops, or clunks, and occurs intermittently on both left and right turns. This issue has been widely reported in 2024–2025 Prologue models and is commonly associated with potential CV joint or drive axle defects, where owners describe similar noises occurring early in the vehicle’s life and sometimes worsening over time.

Filed Apr 22, 2026 · Transmission · VA

My 2024 Honda Prologue is experiencing ongoing drivetrain issues that include noise, vibration, clunking, and a binding sensation. These symptoms occur during turning, accelerating, and at low speeds. I brought the vehicle to the dealer, and they inspected it, but they told me there is no solution available yet and advised me to wait. The dealer has not replaced any parts, and the issue continues. At this time, I have not experienced loss of control or steering failure, but the symptoms are persistent and concerning. Based on widespread reports from other Prologue owners, this appears to be a developing pattern that may indicate a defect in the axle, driveshaft, CV joint, or related front‑end components. I am reporting this so the federal safety agency is aware of the issue and can investigate.

Filed Apr 19, 2026 · Suspension, Transmission · CA

On 04/15/2026, at approximately 13,130 miles, my 2024 Honda Prologue began making a loud, repetitive clicking, popping, and clunking noise from the front axle area. This mechanical noise is highly pronounced when turning sharply at low speeds, such as pulling out of a parking space or turning at an intersection. I took the vehicle to Delta Honda in Antioch, CA on 04/16/2026. They acknowledged the noise but refused to replace the part, citing Honda's guidance that this issue does not impact normal driving. I am filing this complaint because this is a severe safety defect. The CV joint is a critical drivetrain component, and these symptoms are classic indicators of premature mechanical failure. I am highly concerned that the CV axle could fail catastrophically while driving at higher speeds or in traffic. A structural failure of this component could result in a sudden loss of motive power, wheel lock-up, or a total loss of steering control, putting myself, my passengers, and other motorists at imminent risk of a crash. Honda's failure to provide a permanent, safe remedy for this widespread and known defect is unacceptable.

Filed Mar 22, 2026 · FL

The suspected failure involves the front axle/CV (constant velocity) joint assembly, part of the drivetrain system that transfers power from the motor to the wheels while allowing steering movement. The vehicle produces a repetitive clicking/clunking noise during turns, particularly under light acceleration from a stop. This symptom is consistent with a failing outer CV joint or axle shaft component. The vehicle and all components are still installed and available for inspection upon request.A failing CV joint or axle can lead to loss of drive to a wheel, joint separation, or sudden drivetrain failure, especially during turning or acceleration. This creates a risk of loss of vehicle control, particularly when entering traffic, turning at intersections, or maneuvering at low speeds in populated areas. The clicking occurs during normal driving conditions, indicating a potential mechanical integrity issue that could worsen without warning. If the joint fails completely, it could result in sudden immobilization in traffic or inability to control vehicle movement safely. The vehicle has been presented to only the dealer, and they initially replaced but the problem persists. They do not have an answer other than when I presented bc my tires were showing serious wear, they refused to replace and said it was not connected to CV joint problem. No warning lamps or messages have appeared.

Filed Mar 20, 2026 · Suspension · CA

A clicking noise began today from the front suspension area while driving at slow speeds with a slight turn of steering wheel or minor road imperfections. At about 750 miles on the odometer. A separate but louder intermittent clunk is also coming from the front wheel area while using the one pedal driving/regenerative braking autohold function. This occurs when the vehicle comes to a complete stop or starting from a stop. This noise has been occurring since about 200 miles on the odometer. The vehicle was purchased new less than one month ago.

Filed Mar 18, 2026 · Steering · TX

The front axel makes a terrible clicking or clunking sound when turning. This seems to be a common problem with these cars and my concern it the axel will break or wear down to the point of failure.

Filed Mar 5, 2026 · Steering, Transmission · MA

Loud clunking noise from front end when turning right or left and accelerating from a stop or slow speed. I’ve been told by dealer that this is from defective front CV axles. I’ve also been told that this could be a safety issue if the component fails completely. Both General Motors and Honda are aware of the issue.