I am unable to use the high beams. Low beams are very hard to see with making risky when driving at night. No warning lights.
2019 Hyundai Elantra lights complaints
Page 2 of 3: complaints 11 to 40 of 65, newest first, as owners wrote them.
Excessive oil consumption, shudder in motor while driving . Check engine light cam on. Visibility in headlights very low and high beams only working sometimes.
The driver and passenger headlight has been replaced and the bulbs but the headlights keep going out was told it is an electrical problem and contact manufacturer. Also emergency braking did not work in recent accident nor did forward collision warning.
The contact owns a 2019 Hyundai Elantra. The contact stated while driving at an undisclosed speed, the contact stated that the high-beam headlights became inoperable. The contact stated that the high-beam headlights failed to function properly. The contact stated that the bulbs for the high-beam headlights were replaced; however, the failure persisted. The contact engaged the parking brake to stop the vehicle. The dealer was not contacted. The vehicle was not diagnosed or repaired. The manufacturer was not made aware of the failure. The approximate failure mileage was 52,000.
No warning light for oil consumption and it depletes rapidly. Also, High beam lights stopped working and you have to hold the signal in place and the high beam still doesn't turn on. Ive had so many issues with this car since purchasing it, it ridiculous and saddening how there hasn't been any recalls and the issue before this one was dangerous and life threatening. Also, since it's purchase it consumes oil at a rapid rate that has been documented and each time I've visited the repair shop they informed 'there's no oil' in the vehicle and no oil light or anything comes on to warn me. I find out about it because of an entirely different issue needing to be fixed.
Problemas con el motor, específicamente la lubricación. El vehículo fue reparado y aún continuó con los problemas de lubricación, incluyendo los llamados " sprocket" que se dañaron. He leído que Hyundai a retirado muchos vehículos por este mismo problema.
The contact owns a 2019 Hyundai Elantra. The contact stated while driving at an undisclosed speed, the high beam headlights failed to function as intended. The vehicle was taken to the dealer where it was diagnosed with headlamp failures. The contact was informed that the headlamps needed to be replaced. The vehicle was not repaired. The contact was informed of Technical Service Bulletin: T5G, which was related to the failure. The contact was informed that the repair was completed for the previous owner. The manufacturer was made aware of the failure. The contact was informed that the repair was not covered under the Technical Service Bulletin: T5G. The failure mileage was unknown.
The high beams doesnt work. Inside the car it shows the blue logo like if the lights are in highbeams but outside it doesn;t change. The low beams are not effective and I can hardly see at night. I am taking it to the dealer to see if is not too expensive to fix it but my car should be part of the recall for high beams. I do not use the car often and can;t use it at night. I can not see anything at night resulting in the inability to use my car at night.
high beams don’t work . it’s a safety issue because i live in wi and drive on dark roads and there’s deer raccoons etc, running out in the roads everyday. it has been inspected by morries west bend honda and video recorded. it’s a internal issue with the high beam internal flap/mechanism that sopposed to move when high beam commanded on .
I am unable to use the high beams. Low beams are very hard to see with making risky when driving at night. No warning lights. I have a service call to dealer. It is available for inspection. No known maintenance issues prior to event.
The mechanism that exposes the bright part of the head light bulb goes out on this make model vehicle it is a common issue. There is one bulb, only my dim lights work, when I click the bright lights on nothing happens. Very common issue with the vehicle. Nearly 500$ a piece to repair.
The contact owns a 2019 Hyundai Elantra. The contact stated that while driving at an undisclosed speed at night, she became aware that the high beam headlights were not functioning. No warning lights were illuminated. The vehicle was taken to the dealer, who diagnosed a failure with the headlight housing assembly. The vehicle was not repaired. The manufacturer was not notified of the failure. The failure mileage was unknown.
I was going 40MPH when my car started to produce loud noises and stalled. It immediately lost power and I had to pull over on the side of the road. It started back up after 30 minutes and I was able to drive it home, but it continued to make loud noises and I had to drive very slow. Battery is good with 70% charge and the alternator is good.
The headlights on this vehicle have been repetitively malfunctioning, the lamps are not burnt out but the high and low beam lights malfunctioning regularly. I have had the system and computer checked, the computer reset. Nothing is appearing to be wrong but my high beam lights are completely non functional for the third time in 3 months
The electrical plate for the right daytime running light must have fallen out of the engine compartment, according to the dealer service center, because it was no longer there. A warning light appeared on the dashboard system as a yellow triangle enclosing a yellow exclamation mark. It presented a safety issue by causing the warning light to appear on the dashboard panel while the vehicle was being driven. The dealer service center informed me of the cause of the dashboard warning light when I took it to them for diagnosis. There were no warnings prior to the failure.
When Daylight Savings time changed, I realized that my headlights were not aimed properly. While having them aimed, the tech noticed that the aiming rod had fallen off the track, and the light on the drivers side is shining only five feet from the car, onto the ground, whether on high beams or low beams.
High beams quit working I. Weather conditions and now high beams don’t work period and have to replace head light do to problem with assembly driver side and passenger side high beams don’t work
The contact owns a 2019 Hyundai Elantra. The contact stated that the high-beam headlights were dim and became inoperable. The driver was unable to see the roadway clearly. There was no warning light illuminated. The vehicle was taken to the local dealer, where it was determined that the light switch had failed and needed to be replaced. The vehicle was not repaired. The manufacturer was not contacted. The failure mileage was approximately 50,000.
The high beam does not work even after bulb replacement on the 2019 Elantra(the low beams work just fine). A sound of an actuator trying to work is heard coming from the engine with a slight flicker of light but no successful high beam is shown after engaging the high beam actuator on the wheel. This is detrimental to the safety of drivers at night which could lead to a crash, injury, or fatality.
The high beam nolonger functions. On this make model for this year, the manufacturer uses only one bulb for low and high beam. This is accomplished by using a hood to shield part of the bulb; lowered for low beams, raised for high beams. The problem is the mechanism used to raise and lower the shield is made out of cheap plastic. Whenever the gears break or skip a cog the shield will not raise. Spending 2 labor shop hours to replace two shield mechanisms, cheap plastic parts with cheap plastic parts is not the answer. Multiple owners have ask Hyundai to find a better fix… all for not.
The high beam headlights don’t function properly. The low beam is all that works on both headlights. Something to do with the way the shield is not moving up to allow the high beams to function. On line looks like this is a common problem
High beams are not working on both headlight assemblies. Car uses a bulb with 1 filament and actuator to simulate a high beam and both headlight assembly actuators failed on a car with 51k miles. Hyundai has a TSB for this issue, so they are aware of this issue and this needs to be a recall, not just a TSB as this is a major safety issue.
My high beam lights stopped working. Replaced bulbs and they still don’t work.
When I was driving in very dark areas I was trying to turn on my high beams. I have manual headlights so I have to push the lever back. I see the high beam logo on the dashboard, but no lights appearing higher than the low beams. I searched up that it’s a common recall for the 2019 Hyundai Elantra’s and I believe I have that problem with my car. I hope that this description helps out in making the decision as soon as possible. Thank you!
Dim headlights and faulty high beam lights that do not work at all; while the sensor remains lit up on the dash board.
the high beam actuator has failed which has resulted in loss of high beam usage.
The contact owns a 2019 Hyundai Elantra. The contact stated while driving 60 MPH at night, the high-beam headlights failed to work as needed. The contact was able to drive to her destination; however, the contact stated that the vehicle became undrivable at night. There was no warning light illuminated. The dealer was notified of the failure and informed the contact that the VIN was not included in a recall. The vehicle was not diagnosed or repaired. The manufacturer was not notified of the failure. The failure mileage was approximately 95,900.
The headlight high beams do not function, leaving me unable to see.
The contact owns a 2019 Hyundai Elantra. The contact stated that the vehicle was previously repaired under an unknown recall for the headlamps; however, the failure reoccurred. The contact stated that the headlights occasionally would not illuminate after the vehicle was started or while driving at various speeds. The contact stated that when the headlights failed to illuminate, the warning messages for daytime running lights and headlight and taillight out warning light was illuminated. The contact stated that the driver’s headlight needed replacement because it did not illuminate. The contact then stated that the passenger’s side headlight needed replacement; however, the failure reoccurred. The vehicle was taken to the local dealer and the contact was informed that the repair for the headlights would be out of pocket. The manufacturer was made aware of the failure and also informed the contact that the repairs would not be covered for the headlights. The contact stated that the manufacturer referred him to the federal safety agency Hotline and informed him that he may seek legal advice. The approximate failure mileage was 40,000.
The High beams will not engage lights stay on dim mode
VIN decoder
See the problems and recalls for an exact car
Buying a used 2019 Hyundai Elantra?
Check the exact car before you pay: accidents, salvage or flood titles, odometer readings and previous owners.
Check its history