2018 Hyundai Tucson: check engine light

Filed Oct 10, 2026 · Electrical, Lights · FL

Issues: 1. Stop lights failure light turns on and off. 2. Engine light failure notification turns on and off. 3. Headlights low bims failure notification turns on and off. Actions taken: 1. Headlights low bims bulbs were changed. 2. Engine light codes reviewed and updated as report showed; however, warning light still turning on. 3. Stop light fuse has been changed, light bulbs still working.

Filed Sep 26, 2026 · Engine · TX

Engine stalls jurks lose of power engine light blinking excessive oil use

Filed Sep 2, 2026 · Engine · TX

I own a Hyundai Tucson 2018 SEL Plus. My problem is my vehicle is coming to the end of it's 100,000 mile warranty. This vehicle started burning oil about 30,000 miles and it got worse. I checked on recalls and there was no recalls for my VIN number for this vehicle. My Hyundai vehicle is burning a quart of oil every 300 miles and this is no exaggeration. I bought the car brand new and had to replace my 1st Catalytic converter at 79,627 miles on 5/14/25 that was originally on the car. The second Catalytic converter that I had put on I, had to replace that Catalytic converter again at my cost at approximately $900.00 and then after that it plugged up again at 91,928 miles on 7/28/26 and I, had to replace that one that is the third one now. The Catalytic converter company had warranted the work and the converter to be installed. This has caused the car to not only misfire, but become a possible road hazard to miss enough and possibly cause it to stall or reduce the power output of the vehicle while in operation and on public roads in traffic and possibly create a major accident on the freeway. This is a major saftey concern being that you could not only lose power while in motion but could lock up the engine. We talked to mechanics, other people that own them and even the service guys at Hyundai knew it is problem. The service genteman said that they would clean the valves I, believe they talked about cleaning the valves with walnuts like sand blasting and I, told him cleaning the valves is not going to do anything for the oil consumption, because the oil consumption is the engine.The engine when it was originally made on the number 3 cyclinder was bored wrong. That is our problem because the oil rings and rings are letting the oil bypass the piston and filing out the iriadium spark plug and our car mileage has gone down because of this the rings are wearing faster and causing us to keep buying newer spark plugs. " Check Engine Light Flashes " plugged Cat Converter.

Filed Jul 25, 2026 · Engine · UT

The engine has been consuming oil, where we were adding at least a quart of oil between oil changes. We noticed the vehicle would shake like it was going to die while idling at a stop light or in a drive through. Recently my husband was driving home from work on a busy highway and the vehicles check engine light started blinking on and off. He pulled over and had the vehicle towed. The oil consumption made the vehicle throw a rod and damage the engine. Now we are needing to replace the engine.

Filed Jun 17, 2026 · Transmission · HI

January 9, 2026, driver was on I25, when driver heard a loud thud and the RPMs kept rising but the vehicle would not accelerate. Was very dangerous and barely avoided a collision with other drivers on the road. Barely got it home and shut it off. Tried to drive again but would not get out of reverse. Car was towed to Hyundai dealership for inspection. EGO4 Check Engine Light Diagnostic. 120883. Transmission and rear coupler/differential replaced. Test driven and dealership said it drove as designed and shifted as designed. Cost $10,955.29.

Filed Jun 17, 2026 · Engine · HI

On June 5, 2026, driver was on I25, when driver heard engine making a winding and weird noise. Vehicle immediately went from 60 mph to 40 mph. It was extremely dangerous and driver barely evaded a collusion with several other vehicles. A check oil and engine light came on. Towed back to same Hyundai dealership. They claim engine needs replaced and needs maintenance kit. Total cost $16,892.87. Note: prior to, in January 2026 the transmission and differential were replaced. Was told there were no other issues (same Hyundai dealership).

Filed May 8, 2026 · Engine, Transmission · TX

The 2.0L engine catastrophically failed during normal highway driving, consistent with a thrown connecting rod. The vehicle suddenly lost power on a roadway with tractor-trailer traffic. The driver and a child passenger narrowly avoided being struck by a semi-truck before the vehicle could be brought to a safe stop. No prior warning lamps, no check engine light, no abnormal noises, and no indications of any kind preceded the failure. The failed engine is currently at a Hyundai dealership and is available for inspection. The dealer has confirmed catastrophic engine failure and submitted an engine replacement request to Hyundai Motor America. Hyundai Motor America declined the engine replacement request, citing incomplete status on Service Campaign 966 (Knock Sensor Detection System update for connecting rod bearing wear). The owner purchased the vehicle used and was never notified by Hyundai of Service Campaign 966. The owner also was never notified of the federal safety agency Recall 20V543000 (ABS module fire risk), which remains open and unrepaired on this vehicle, demonstrating a pattern of failed manufacturer notification to the current registered owner. This vehicle is a Class Vehicle in the Hyundai/Kia Theta II engine class action settlement (In re: Hyundai and Kia Engine Litigation), which extended powertrain coverage to a lifetime warranty for connecting rod bearing failure on 2018 Tucson vehicles equipped with the Theta II 2.0L engine. The failure mode experienced is precisely the defect this settlement and Campaign 966 were designed to address. Component that failed: engine, specifically connecting rod bearing/short block assembly. Component is available for inspection. Vehicle has approximately 71,000 miles. The failure created an immediate and severe risk of fatal collision involving a child passenger. Manufacturer has been contacted and has denied warranty coverage. the federal safety agency action is requested regarding both the engine defect denial pattern and the unrepaired ABS fire-ri

Filed Jan 31, 2026 · Engine · MI

Driving on freeway no warning lamps on dashboard. Exit freeway to get gas and there is minimal engine performance and check engine light illuminates. Cylinders are not firing, no compression. Engine failure confirmed by hyundai service dept and independent mechanic.

Filed Jan 20, 2026 · Engine · CA

The car began making a knocking sound on my 5.8 mile drive. On my drive home from work, the knocking was louder, and the car barely accelerated on the highway and over-revved trying to hit at least 50 mph to keep up with the flow of traffic. I took the car to the Hyundai Service Center immediately using city streets rather than the highway. I had a family member follow me to make sure I made it to the service center as well as give me a ride home after I dropped off the vehicle. As I was driving there, the car had a hard time accelerating from a stop and barely maintaining speed of the flow of traffic and the “Check Engine” light came on and flashed as I got closer to the dealer service center. The dealer service center confirmed that the engine needs to be replaced due to the connecting rod bearing failure, a common issue with the 2.0L I4 F DOHC 16 V engine in my 2018 Hyundai Tucson. The Hyundai Service Manager has repeatedly confirmed that the engine issues presented in my car are consistent with a recall for the same model engine found in my car.

Filed Jan 14, 2026 · Acceleration, Engine · MN

The engine and engine management system of my 2018 Hyundai Tucson experienced repeated failures resulting in loss of propulsion and unsafe drivability. In November 2025, while traveling approximately 75 mph on a freeway, the vehicle suddenly entered limp mode without any prior warning, causing an abrupt loss of power in active highway traffic. No warning lamps or messages appeared before the failure. After the loss of propulsion occurred, the check engine light, battery light, and oil light illuminated sequentially. Diagnostic trouble codes P1326 and P0326 were recorded. Initial inspection indicated severe oil consumption despite a recent oil change less than 2,000 miles earlier. A Hyundai dealership replaced knock sensors under warranty. Shortly after release (30 miles), the vehicle again exhibited severe drivability issues, including a flashing check engine light, and required immediate towing. A second Hyundai dealership replaced the short engine block under warranty. Approximately 180 miles after the engine replacement, the vehicle again developed unsafe drivability symptoms, including delayed throttle response, failure to accelerate unless the accelerator was fully depressed multiple times, jerking or lugging when slowing or stopped, and a faint whining noise. The check engine light illuminated again. These failures represent repeated loss of propulsion and unsafe operation following manufacturer-approved repairs, including full engine replacement. The vehicle has been out of service for approximately 57 days and remains in the custody of a Hyundai dealership awaiting diagnostics. The vehicle is available for inspection upon request. The sudden and unpredictable loss of power at highway speed created a significant risk of collision and serious injury to the driver and surrounding motorists.

Filed Nov 7, 2025 · Engine, Fuel system · IL

My car on the expressway wouldn't go over 40 and this was happening intermittently so my car was unsafe. No check engine light but it was just at the dealership for an oil change. Has. been an ongoing problem since I bought the car! Smells, gets hot!

Filed Nov 5, 2025 · Engine · 102,000 miles · TX

The contact owns a 2018 Hyundai Tucson. The contact stated that while driving at various speeds, the vehicle almost stalled. The contact stated that the check engine warning light illuminated and was flashing off and on. The accelerator pedal was depressed; however, the vehicle failed to respond as needed. The contact pulled over to the side of the road, and the vehicle remained running. The contact waited for a while and then shifted to drive(D) and was unable to accelerate above 30 MPH. The contact stated that the failure was a recurring failure. The vehicle was taken to a Parts Store and was scanned, and DTC: P1326 was retrieved. The contact had not taken the vehicle to a dealer or to an independent mechanic. The vehicle was not diagnosed or repaired. The contact was no longer driving the vehicle. The manufacturer was not informed of the failure. The failure mileage was approximately 102,000.