2019 Hyundai Tucson: engine overheating

Filed Oct 13, 2026 · Acceleration, Engine · LA

While driving at highway speeds, my 2019 Hyundai Tucson SE suddenly loses acceleration and drops into a 30 mph 'limp mode' while the engine overheats. This creates an immediate highway safety hazard with an imminent risk of a rear-end collision. The vehicle also suffers from excessive oil consumption, requiring manual top-offs twice a week. The servicing dealership diagnosed a fuel system failure, quoting $5,847 to replace the fuel pump, fuel injectors, and oil gasket. Hyundai Corporate (Case #43358088) officially denied warranty coverage on October 12, 2026, falsely claiming wear and tear despite active TXXM 150,000-mile extended warranty framework protections. Furthermore, there is a data discrepancy: the dealership pulled diagnostic trouble code P0172, but corporate claims the vehicle threw code P0173 and is withholding the physical diagnostic printout behind a fee paywall.

Filed Feb 7, 2026 · Engine · NY

The vehicle has consumed the oil and no light came on. I drove and i checked when the running engine start doing a dry noise and loose the power. The stick was completely dry, i filled with 2 litters and now the stick show in the half. My vehicle has 60k miles and tomorrow will check on the servis. It is unacceptable first how the vehicle consumed the oil and the second the system didn't notify risking an overheat and posing an elevated risk to spop in the middle of the road causing an accident or starting a fire due to overheat.

Filed Nov 24, 2025 · Engine · FL

I own a 2019 Hyundai Tucson, Since purchase, I noticed a strange engine noise. The dealership [Dealership Name] told me it was not a problem, but the vehicle has consistently consumed about 1 liter of oil per week. Despite multiple service visits, Hyundai has not recognized this as a factory defect and requested $3,500 for testing. I am concerned that the excessive oil consumption could lead to engine overheating, which may increase the risk of an accident.

Filed Oct 8, 2025 · Engine, Fuel system · TX

The vehicle is experiencing excessive oil consumption and increasingly severe engine performance symptoms. The oil level drops rapidly between changes, but the loss is not due to external leaks. The engine burns oil internally, causing residue buildup and damage to other components — specifically the intake manifold and catalytic converter, which the dealer has now recommended replacing. These issues align with the symptoms addressed in Hyundai Campaign 966 (Engine Monitoring / Knock Sensor Detection System), which is intended to detect early bearing wear and related oil consumption defects. However, the dealership refused to perform the required campaign diagnostics (bearing inspection, KSDS verification, and oil-consumption test) without charging a diagnostic fee. Even though the engine has not yet fully failed or entered limp mode, the excessive oil consumption is already causing secondary damage to emissions and intake components. If left unresolved, this can escalate to engine seizure, catalytic converter overheating, or exhaust-related fires due to unburned oil entering the converter. These are clear safety hazards that can result in loss of power, smoke, or fire while driving. Multiple Hyundai owners have reported identical problems — excessive oil loss, residue damage to emission systems, and dealer refusals to perform Campaign 966 inspections. These patterns indicate a systemic engine defect that leads to downstream component failures, not isolated wear. Replacing the manifold or converter does not correct the root cause, as oil consumption continues after replacement and will likely damage new parts. The dealer’s refusal to perform the manufacturer’s required diagnostics and their attempt to charge for unrelated repairs prevent proper defect identification. This is a serious and ongoing safety issue affecting Hyundai Tucson and other models with the same engine family.

Filed May 29, 2024 · Engine, Transmission · FL

I was driving on the highway when my vehicle started decelerating and shutting down completely. I ended up safely pulling over because it could’ve been a serious accident and called FHP they tested my car code p1326 came up I had it towed to the dealership where they assured me I had the extended warranty and that the car should be covered and I don’t have to pay out of pocket. What the dealership told me would take 2 days has now been almost a month and still counting. I’ve had 3 denials for engine replacement due to being outside of warranty with Hyundai even though I have the extended warranty. The dealership has sent pictures and spoke with my case manager at Hyundai to confirm that the engine failure was due to the bent connecting rod bearing that is again covered under warranty. They came back and said other codes populated showing the cause was not the rod bearing but that has to be false. One of the other codes was regarding coolant and I’ve never had any issues with my car overheating or anything prior to my engine shutting down on the highway. I never had any flashing lights or warning signals on my dashboard. This was very unexpected and I refuse to pay for a repair that I didn’t cause especially when this is consistent with Hyundai and their engines. This is a 2019 I should not have any issues. I need a solution quick

Filed Apr 26, 2022 · Engine · 40,000 miles · OR · fire

The contact owned a 2019 Hyundai Tucson. The contact stated while driving approximately 55 MPH the vehicle started smoking and overheating. The contact was able to pull over safely. There were no warning lights on the instrument panel. Once the vehicle stopped the doors were automatically locked. The nearby drivers notified the contact of the fire under the vehicle. Once the contact exited the vehicle, the engine was destroyed by the fire. The inside of the vehicle was still functional. The state police arrived on the scene; however, a police report has not been obtained. The fire department also arrived and extinguished the fire. The vehicle was towed to a wrecking yard. The manufacturer was not notified of the failure. There were no injuries or medical reports. The approximate failure mileage was 40,000.