Check a VIN

International Harvester 3000 recalls

There are 7 safety recalls on record for the International Harvester 3000, covering 282,804 vehicles in total across all the models in each campaign. Newest first.

International Harvester 3000 recalls by model year

2001 42000 71999 71998 51997 21996 21995 21994 21993 2

All recalls

Service brakes, air: antilock: wheel speed sensorReported June 3, 2004 · 81,883 vehicles affected
What is wrong
On certain school buses and truck model vehicles manufactured between february 28, 1999, through april 5, 2004, the anti-lock brake system electronic control unit (ecu) may misinterpret a corrupt wheel speed signal.
Risk
The corrupt wheel speed signals may improperly activate the ABS, instead of deactivating the ABS. This may result in the driver experiencing a hard pedal feel and a decrease in deceleration at the end of the stop, resulting in extended stopping distances which could cause a vehicle crash, possibly resulting in property damage, personal injury, or death.
Remedy
International will notify its customers and inspect and repair the affected vehicles free of charge. The recall began august 1, 2004. Owners who take their vehicles to an authorized dealer on an agreed upon service date and do not receive the free remedy within a reasonable time should contact international customer service at 1‑800‑327‑4236.

Recall number 04V269000 · Recall details

SteeringReported July 28, 2003 · 24,375 vehicles affected
What is wrong
On certain school, transit, and commercial buses equipped with adjustable steering columns, the steering shaft pinch bolt interferes with the rubber boot that protects it. Over time, a hole may wear into the boot and catch the bolt.
Risk
If the bolt catches on the hole, the boot may restrict the movement of the steering wheel which could result in a vehicle crash.
Remedy
International notify its customers and inspect and, if necessary, repair the steering column. Owner notification began november 19, 2003. Owners should contact international at 1‑800‑448‑7825.

Recall number 03V264000 · Recall details

Service brakes, air: supply: check valveReported May 20, 2002 · 38,955 vehicles affected
What is wrong
On certain transit and school buses, a brass fitting connects the double check valve to the brake relay valve. With certain inputs to the vehicle, the weight of the check valve on the fitting can cause the assembly to resonate. The subject vibration can cause excessive strain levels in the fitting, which could eventually fatigue and fail.
Risk
If the fitting breaks, the rear service brakes will cease to operate without warning, resulting in an extended stopping distance, increasing the risk of a crash.
Remedy
Dealers will install a kit to remount the double check valve with a flexible hose on the amjority of vehicles. On a small number of units with clearance issues or traction control, a kit with a new relay valve that has a built-in double check valve will be installed. Owner notification began august 30, 2002. Owners who take their vehicles to an authorized dealer on an agreed upon service date and do not receive the free remedy within a reasonable time should contact international at 1‑800‑448‑7825.

Recall number 02V135001 · Recall details

WheelsReported May 10, 2002 · 801 vehicles affected
What is wrong
Certain heavy duty trucks, truck tractors, and buses equipped with 195/75r22.5 tires mounted on 7.5 inch wide wheels fail to comply with requirements of federal motor vehicle safety standard no. 120, "tire selection and rims for motor vehicles other than passenger cars." these tires and rims do not match.
Risk
Tires mounted on rims that are too narrow could experience a decrease in sidewall durability, and could also experience higher treadwear for tires mounted on the steering axle.
Remedy
Dealers will install new rims of an acceptable width (8.25 - 9 9inches) for the 295/75r22.5 tire size. Owner notification began august 23, 2002. Owners who take their vehicles to an authorized dealer on an agreed upon service date and do not receive the free remedy within a reasonable time should contact international at 1‑800‑448‑7825.

Recall number 02V137000 · Recall details

Steering: linkages: drag: link: connectionReported October 16, 2000 · 15,257 vehicles affected
What is wrong
Vehicle description: school and heavy duty trucks equipped with trw drag links. Each drag link assembly contains two 20-edl model ball socket assemblies. Certain of the ball-socket bearings have a below specification case depth and/or hardness which can lead to premature wear out of the socket.
Risk
This can lead to premature wear with possible separation of the ball stud from the socket, increasing the risk of loss of control of the vehicle.
Remedy
Dealers will remove and replace affected drag links.

Recall number 00V246205 · Recall details

Service brakes, air: antilockReported August 21, 2000 · 17,231 vehicles affected
What is wrong
Vehicle description: transit buses built with bendix air ABS with an ec-17 1030r electronic control unit (ecu). There have been reports of unwanted ABS activation at low speeds caused by 1) chafed ABS wheel speed sensor wires on rotating parts or 2) a damaged component at the wheel end that generates a certain type of erratic sensor signal.
Risk
This condition could cause the ABS ecu to exhaust the air at the air brake modulators for one or more of the wheels. This could result in extended braking distances and a possible crash.
Remedy
Dealers will replace the ABS ecu.

Recall number 00V232201 · Recall details

Service brakes, hydraulic: antilock/traction control/electronic limited slipReported July 3, 2000 · 104,302 vehicles affected
What is wrong
Vehicle description: school and heavy duty trucks built with bendix air ABS. The ABS sensor wires on rotating parts chafes which can lead to a false signal being sent to the bendix ABS electronic control unit (ecu).
Risk
This could cause the air ABS ecu to exhaust the air at the air brake modulators for one or more of the wheels.
Remedy
Dealers will inspect the sensor wiring routing and re-route or replace the ABS sensors as required.

Recall number 00V176000 · Recall details

Questions about the International Harvester 3000 recalls

How do I check if my International Harvester 3000 has an open recall?

Enter your VIN in the VIN decoder on this page to see the recalls for your exact model and year, then confirm with any dealer of the brand or the manufacturer, who can tell you whether the repair was already done on your car.

Do I have to pay for a recall repair?

No. Safety recall repairs are free at any authorized dealer of the brand, even if the car is out of warranty or you are not the first owner.

How many recalls does the International Harvester 3000 have?

7, covering service brakes, air, steering and wheels.

VIN decoder

See the problems and recalls for an exact car

Buying a used International Harvester 3000?

Check the exact car before you pay: accidents, salvage or flood titles, odometer readings and previous owners.

Check its history