The worst 2001 International Harvester 9000 problems
Ranked by number of owner complaints. Mileage and cost come from what owners wrote.
Problems by type
Tap a problem to see which part fails, at what mileage and in which other years.
Recalls 3
Suspension: front: hub
- What is wrong
- On certain heavy and medium duty trucks and buses equipped with truck hub units manufactured by skf exclusively for use on arvinmeritor's ff98x series non-drive steer axles, the hub unit bearings can wear prematurely.
- Risk
- Seizure of the bearings can cause wheel separation or wheel end fire.
- Remedy
- Dealers will replace all front axle hubs. Owner notification began on november 12, 2003. Owners who take their vehicles to an authorized dealer on an agreed upon service date and do not receive the free remedy within a reasonable time should contact international at 1‑800‑448‑7825.
Recall number 03V193000 · Recall details
Service brakes, air
- What is wrong
- On certain heavy duty trucks, a brass fitting connects the double check valve to the brake relay valve. With certain inputs to the vehicle, the weight of the check valve on the fitting can cause the assembly to resonate. The subject vibration can cause excessive strain levels in the fitting, which could eventually fatigue and fail.
- Risk
- If the fitting breaks, the rear service brakes will cease to operate without warning, resulting in an extended stopping distance, increasing the risk of a crash.
- Remedy
- Dealers will install a kit to remount the double check valve with a flexible hose on the majority of vehicles. On a small number of units with clearance issues or traction control, a kit with a new relay valve that has a built-in double check valve will be installed. Owner notification began on april 18, 2003. Owners who take their vehicles to an authorized dealer on an agreed upon service date and do not receive the free remedy within a reasonable time should contact international at 1‑800‑448‑7825.
Recall number 03V137000 · Recall details
Service brakes, air: supply: check valve
- What is wrong
- On certain medium and heavy duty trucks, a brass fitting connects the double check valve to the brake relay valve. With certain inputs to the vehicle, the weight of the check valve on the fitting can cause the assembly to resonate. The subject vibration can cause excessive strain levels in the fitting, which could eventually fatigue and fail.
- Risk
- If the fitting breaks, the rear service brakes will cease to operate without warning, resulting in an extended stopping distance, increasing the risk of a crash.
- Remedy
- Dealers will install a kit to remount the double check valve with a flexible hose on the majority of vehicles. On a small number of units with clearance issues or traction control, a kit with a new relay valve that has a built-in double check valve will be installed. Owner notification began september 11, 2002. Owners who take their vehicles to an authorized dealer on an agreed upon service date and do not receive the free remedy within a reasonable time should contact international at 1‑800‑448‑7825.
Recall number 02V135002 · Recall details
See all 3 recalls for the 2001 International Harvester 9000
Defect investigations
Integral hub and bearing assembly
The companies involved in this matter are:skf (hub mfr), arvinmeritor (front axle mfr), and international,( manufacturers of medium duty trucks).skf identified manufacturing defects for specific build dates on front axle hub and bearings (wheel bearings) supplied to arvin meritor.as a result, arvinmeritor notified international of axles supplies with possible defective front hub assemblies.as a result of that notification, 2041 trucks are being recalled by international for defective front axle wheel bearings which may fail in such a way that a wheel separation or wheel bearing fire occurs.see attached summary report for additional details.
PE02092
Technical service bulletins for the 2001 International Harvester 9000 4
Bulletins tell dealers how to fix known problems. A warranty extension means the manufacturer pays for that repair for longer.
- International: procedure information to resolve issue of overheating and smoking of low mileage, single...
- International: after lining condition and wear, fastener torque, component lubrication have been verified...
- International truck: steering wheel shack left to right at road speed
- International: gauges dropping out on 5000 and 9000 series trucks
Compare the 2001 International Harvester 9000
Other model years
Questions about the 2001 International Harvester 9000
Is the 2001 International Harvester 9000 reliable?
Owners have filed 0 complaints about the 2001 International Harvester 9000.
What is the most common problem with the 2001 International Harvester 9000?
There are not enough complaints to tell.
How many recalls does the 2001 International Harvester 9000 have?
3 recalls, covering suspension and service brakes, air.
VIN decoder
See the problems and recalls for an exact car
Buying a used 2001 International Harvester 9000?
Check the exact car before you pay: accidents, salvage or flood titles, odometer readings and previous owners.
Check its history