2003 International Durastar technical service bulletins
123 technical service bulletins and manufacturer communications cover the 2003 International Durastar.
Bulletins tell dealers how to fix known problems. A warranty extension means the manufacturer pays for that repair for longer.
- This article provides guidance to dealership personnel, Technical Services personnel, Dealer Service...
- This tool is designed to compare Diamond Logic feature data across multiple vehicle configuration files
- Engine replacements for all International engines will need to follow this procedure.
- This document will guide the user through a step-by-step procedure for detecting water leaks in vehicle...
- This document provides: Steps to take when switch pack programming fails, or when switch pack disappears...
- This document will guide the user through understanding Prop Shaft Codes and understanding the variations...
- In some geographic areas, ambient temperatures reaching below 15°F (-10 °C), including high levels of...
- Title: Service Portal iKNow Feedback Case Types Applies To: All
- Title: Driveline Information Center and Troubleshooting Procedures Applies To: All Vehicles
- Title: A/C Refrigerant and Oil Capacities Applies To: All current models
- Title: Fan belt replacement guidelines for frayed edges Applies To: All Models
- Title: Engine Emission Label Replacement, Certificate of Conformance and Clean Idle Sticker Addition...
- Title: Steering Gear Seal Repair Guidelines Applies To: Steering gears
- Title: Vehicle Programming Information for Engine: Single Box 1998-2004 I6 & V8 Applies To: Single Box...
- Title: How to Request a Horsepower Quote Applies To: All International and Cummins Electronic engines
- This document reminds technicians of the critical relationship between the truck's suspension and the...
- Applies To: All Navistar Powered Trucks Requesting Engine Emission Label Replacement, Certificate of...
- This article addresses chassis lean conditions on all chassis
- Suggested alignment target values when performing a vehicle axle alignment.
- Starter Diagnostics and warranty claim procedure; all engines EXCLUDING Cummins ISB engine with Allison...
- J1939 Data Link Source Address Information
- How to request a horsepower quote; all International and Cummins engines
- Starter diagnostics and warranty claim procedure for all engines and all chassis EXCLUDING vehicles...
- J1939 Data link source address information
- Pico Scope CCOS (Crankcase Separator Test)
- PicoScope Test 5V & 12V Intermittent Open and Short circuit diagnostics
- PicoScope Test
- PicoScope Test for Datalink (CAN) Health Shorts & opens
- PicoScope Test Resistance and Ohmmeter
- PicoScope Test One Channel RCT
- Front cab mount bushings/insulators MV, HV, DuraStar, and WorkStar vehicles used in severe vocations
- Cab water leak troubleshooting tips; HX with steel cab only
- Calculating pulses per mile (speedometer setting); only models equipped with International engines
- Dual Drive Cab Throttle Position Harness for APS/IVS throttle pedals; only models with both left hand and...
- J1939 Data Link Troubleshooting
- Power Steering Diagnostics Flow / Pressure Specifications For Power Steering Gears and Power Steering Pumps
- Engine Oil Capacities
- General wheel speed sensor troubleshooting
- Aftertreatment Clamp Corrosion; Single Can Aftertreatment Systems
- Frame Rail Straightness Inspection Procedure
- Suggested alignment target values when performing a vehicle axle alignment
- Cab Lean Concern
- Codes 141, 142, and 621 in a 2-box ECM/IDM; only models with 2-box ECM/IDM from 2003-2007
- Driveline Information Center and Troubleshooting Procedures
- Repair Procedures for Vehicles Struck by Lightning
- A/C Refrigerant and Oil Capacities
- Cleaning and Disinfecting Trucks and Buses
- Bendix EC80 Blank Module Replacement Program;
- Oil Capacities; All Electronic International Engines 1994
- Suspension Lean Diagnostics; All models
- Park Lights Come Whenever the Key is On
- Tool Instruction
- Engine Oil Capacities All Electronic International Engines 1994
- Radio Diagnostics and Information
- The fire extinguishers may become clogged or require excessive force to activate
- Updating OnCommand Link with Accelerator
- ISX, N13, and N9 / N10 Aftertreatment Private Data Link Troubleshooting
- Winter Front Usage
- Engine Oil Capacities
- OnCommand EZ-Tech
- Using Supplier Software to Check DTCs
- Trailer Auxiliary Switch Lamp Burning Out; Only Vehicles Equipped with Feature Code 0008TTH or 0008THG
- Hydraulic Brake System Park Brake Inspection and Adjustment Procedures; only models with Hydraulic Brake...
- NEW Ultrasonic DEF Tank Sending Unit; only models with SCR Aftertreatment system.
- Urea Quality Sensor (UQS) Supplemental Diagnostic and Service Information; only models with SCR...
- HVAC fault 2609-19 with 4th Gen BCM; Only models equipped with 4th generation BCM
- Dealer EZ-Tech and Diagnostic Software Support Resource Center
- CPA Injector Misfire Detection; Only models with 2004 thru 2017 International engines.
- OnCommand EZTech
- Cylinder Performance Analyzer (CPA) Resource Center; Only models with 2004 thru 2017 International engines.
- OnCommand EZ-Tech Download Center
- Steering Shake, Shimmy, Shudder, or Steering Vibration; only with 14k front weight rated axles and below
- Steering Fluids
- Cooling System Flush Procedure
- Repair Information for Damaged Headlight Connector
- J1939 Data Link Troubleshooting; Only Models with 250k Baud Data Link (Black 9 Pin Diagnostic Connector)
- To Get A Helios Capture; All 1939 and 1708 multiplexed trucks only
- Radiator internal restriction and flush procedure
- Wind noise at upper side door
- Remote Power Module (RPM) Visual Inspection Guidelines
- Windows Stop Randomly or are Inoperative, Power Door Locks are inoperative
- Front Blower Motor Runs Breifly At Initial Power Up
- 8,000 lbs
- Dual Fuel Tank Transfer Pump System With Two Wire Pump Troubleshooting; equipped with feature 595192 built...
- The First Check to make when Troubleshooting any Body Controller or ESC Issue
- Cluster Software Update Instructions
- Wind noise at upper side door
- Cowl tray seal; only built prior to 11/11/2013
- Remote power module (RPM) troubleshooting on PRE-2007 medium duty trucks
- Cluster Issues
- 1939 Data Link Troubleshooting
- Lubrication to the Intermediate Steering Column Upper U-Joint
- Transmission Control Module Relocation; only with Allison WT Gen 3 Transmission
- Manual Shift Lever Jumps Out of Gear; built during specific build dates noted in document
- Headlight Condensation or Frost; excludes sealed beam headlights such as on WorkStar, Paystar and 9900i)
- Headlight Aiming; pre 2007 only
- On/Off Fan Drive Not Working With AC on Vehicles with ESC; only pree 2007 models equipped with ESC.
- City Horn Blows When Driver Shuts off Truck and Walks Away; only equipped with with ESC or Body Controller
- Body Controller/ESC Software Updates
- How to Change From a 5 Wire Fuel Transfer Pump to a 2 Wire Fuel Transfer Pump
- Water entry into the cab / Adding Cowl tray seal; models built prior to 11/11/2013
- Medium duty cole weather operation / solid winter front; EXCLUDING High Cab DuraStar
- ESC Diagnostic Trouble Code (DTC) Index
- Adjustment Procedure for Tilt Only Steering Column; only models with Feature code 0005708
- Wiper Troubleshooting
- Hood Adjustment
- How To Get A Helios Capture; only 1939 and 1708 multiplexed buses and trucks
- Injector Driver Module (IDM) Bottom Kit
VIN decoder
See the problems and recalls for an exact car
Buying a used 2003 International Durastar?
Check the exact car before you pay: accidents, salvage or flood titles, odometer readings and previous owners.
Check its history