2014 International N13 - Engine technical service bulletins
125 technical service bulletins and manufacturer communications cover the 2014 International N13 - Engine.
Bulletins tell dealers how to fix known problems. A warranty extension means the manufacturer pays for that repair for longer.
- This article provides guidance to dealership personnel, Technical Services personnel, Dealer Service...
- This article only applies to Models w/ 0016UZL Built Between 06/23/2014 – 05/11/2020 OR Models w/ 0016UZL...
- New CARB Idle Reduction Change Request
- This tool is designed to compare Diamond Logic feature data across multiple vehicle configuration files
- This document provides guidance for assessing the feasibility of implementing a customer-requested change...
- Engine replacements for all International engines will need to follow this procedure.
- This document will guide the user through a step-by-step procedure for detecting water leaks in vehicle...
- This document will guide the user through understanding Prop Shaft Codes and understanding the variations...
- In some geographic areas, ambient temperatures reaching below 15°F (-10 °C), including high levels of...
- Title: Service Portal iKNow Feedback Case Types Applies To: All
- Title: Driveline Information Center and Troubleshooting Procedures Applies To: All Vehicles
- Title: A/C Refrigerant and Oil Capacities Applies To: All current models
- Title: Fan belt replacement guidelines for frayed edges Applies To: All Models
- Title: Engine Emission Label Replacement, Certificate of Conformance and Clean Idle Sticker Addition...
- Title: Steering Gear Seal Repair Guidelines Applies To: Steering gears
- Title: How to Request a Horsepower Quote Applies To: All International and Cummins Electronic engines
- This document reminds technicians of the critical relationship between the truck's suspension and the...
- Applies To: All Navistar Powered Trucks Requesting Engine Emission Label Replacement, Certificate of...
- This article addresses chassis lean conditions on all chassis
- Engine Oil Capacities
- Engine Emission Label Replacement, Certificate of Conformance and Clean Idle Sticker Addition Procedure
- Required Torque Wrench to Complete Connecting Rod Bolt Torque Procedure
- NEW Ultrasonic DEF Head Unit
- ISB Starting System Diagnostics; Only models built with cummins ISB engines
- DEF Dosing Valve
- Driveline Information Center and Troubleshooting Procedures
- FLR-10
- Tool Instruction
- Cylinder Pack
- Engine software OBD issues will be corrected which will aid in engine malfunction identification and...
- Engine Oil Capacities All Electronic International Engines 1994
- Radio Diagnostics and Information
- A/C Refrigerant and Oil Capacities
- Camshaft and Rocker Arm Reusability Guide
- Exhaust Manifold Service Procedures
- Engine Emission Label Replacement, Certificate of Conformance and Clean Idle Sticker Addition Procedure;...
- APR Liner Upgrade; Required Torque Wrench to Complete Connecting Rod Bolt Torque Procedure
- Auxiliary Throttle Programmable Parameters (Excluding, HX, PayStar and 9000 Series Models)
- Updating OnCommand Link with Accelerator
- J1939 Data Link Troubleshooting
- ISX, N13, and N9 / N10 Aftertreatment Private Data Link Troubleshooting
- Winter Front Usage
- Engine Oil Capacities
- OnCommand EZ-Tech
- High Pressure Fuel Pump and Oil Fill Hose Oil Leak Repair Procedure
- Using Supplier Software to Check DTCs
- Oil Pump Bushing Replacement Procedure
- Aftertreatment Private Data Link Troubleshooting
- Trailer Auxiliary Switch Lamp Burning Out; Only Vehicles Equipped with Feature Code 0008TTH or 0008THG
- NEW Ultrasonic DEF Tank Sending Unit; only models with SCR Aftertreatment system.
- Installing and Servicing the Rear Sump Stainless Steel Oil Pan
- Installing and Servicing the Front Sump Stainless Steel Oil Pan
- Long Block Plus (LBP) service replacement engine
- Urea Quality Sensor (UQS) Supplemental Diagnostic and Service Information; only models with SCR...
- HVAC fault 2609-19 with 4th Gen BCM; Only models equipped with 4th generation BCM
- Dealer EZ-Tech and Diagnostic Software Support Resource Center
- CPA Injector Misfire Detection; Only models with 2004 thru 2017 International engines.
- OnCommand EZTech
- SCR Vehicles Setting 3363-16 (FC1713) due to Crossed DEF Tank Coolant Lines or Inverted DEFTHV
- CPA Full Load Blow-By Test (FL-BBT); Only ESN 126HM2Y4300000 thru 4315712 and ESN 124KM2Y4400000 thru 4401769
- Cpa hpfp
- CPA Base Engine Analysis Module (BEAM): Test Descriptions and Detailed Information
- Cylinder Performance Analyzer (CPA) Resource Center; Only models with 2004 thru 2017 International engines.
- OnCommand EZ-Tech Download Center
- CPA Base Engine Analysis Module (B.E.A.M) Overview
- Cylinder Pack
- Cpa N13
- Turbocharger Oil Supply Tube Retrofit
- Using the SnoDepot Stainless Rear Sump Oil Pan on N13 Engines in New York State DOT (NYSDOT) Trucks.
- Steering Shake, Shimmy, Shudder, or Steering Vibration; only with 14k front weight rated axles and below
- N13 Cylinder Pack
- Steering Fluids
- J1939 Data Link Source Address Information
- Off-Chassis Charge Air Cooler Cleaning Procedure
- Cooling System Flush Procedure
- Cpa N13
- Complete Turbocharger Replacement Guidelines
- Performing RCT (Relative Compression Test) and misfire test with CPA Tool
- Update for Excessive Lubrication Oil Consumption
- Cylinder Head Crack Inspection
- Big Bore Engine Lubricating Oil Consumption Diagnostics
- Aftertreatment Outlet NOx Sensor Internal Water Shield
- Oil Leak- Road Draft Tube IBB
- Ht EGR
- Change in Seat Belt Manufacturer
- Spn 731 fmi 16
- Navistar Switching From Shell Rotella (Yellow) Coolant to Fleetrite NOAT (Red) Coolant
- Induction System Cleaning Procedure
- ETV (Engine Throttle Valve)
- Intake Air Heater Test, DTC 62611 and 62618
- DPF Snap Accel Test
- Oil Leak- Road Draft Tube
- Spn 731 fmi 18
- SPN 3055 FMI 0 FRP exceeded maximum Troubleshooting
- Spn 3055 fmi 15 frp
- DTC 190-0
- NOx Signal Codes Diagnostic Help
- Engine oil pressure Connector Interference
- LeakLocator Diagnostic Procedure Heavy Duty
- DTC 191-16 toss/vss
- Fault Code SPN 5848 FMI 10 Diagnostic Procedure
- Spn 3055 fmi 1
- DTC 1373
- Spn 724 fmi 20
- Breather Replacement
- Remote Engine Speed Control Module (RESCM) Troubleshooting; Only trucks equipped with RESCM
- Body Controller Resource Center
- Headlight Operation and Troubleshooting; only Post 2007 Vehicles Built with a Body Controller
VIN decoder
See the problems and recalls for an exact car
Buying a used 2014 International N13 - Engine?
Check the exact car before you pay: accidents, salvage or flood titles, odometer readings and previous owners.
Check its history