2011 International Paystar technical service bulletins
175 technical service bulletins and manufacturer communications cover the 2011 International Paystar.
Bulletins tell dealers how to fix known problems. A warranty extension means the manufacturer pays for that repair for longer.
- This article provides guidance to dealership personnel, Technical Services personnel, Dealer Service...
- There are two ways to program 5000 and 9000 odometer
- New CARB Idle Reduction Change Request
- This tool is designed to compare Diamond Logic feature data across multiple vehicle configuration files
- This document provides guidance for assessing the feasibility of implementing a customer-requested change...
- Engine replacements for all International engines will need to follow this procedure.
- This document will guide the user through a step-by-step procedure for detecting water leaks in vehicle...
- This document will guide the user through understanding Prop Shaft Codes and understanding the variations...
- In some geographic areas, ambient temperatures reaching below 15°F (-10 °C), including high levels of...
- Title: Service Portal iKNow Feedback Case Types Applies To: All
- Title: Driveline Information Center and Troubleshooting Procedures Applies To: All Vehicles
- Title: A/C Refrigerant and Oil Capacities Applies To: All current models
- Title: Fan belt replacement guidelines for frayed edges Applies To: All Models
- Title: Engine Emission Label Replacement, Certificate of Conformance and Clean Idle Sticker Addition...
- Title: Steering Gear Seal Repair Guidelines Applies To: Steering gears
- Title: How to Request a Horsepower Quote Applies To: All International and Cummins Electronic engines
- This document reminds technicians of the critical relationship between the truck's suspension and the...
- Applies To: All Navistar Powered Trucks Requesting Engine Emission Label Replacement, Certificate of...
- This article addresses chassis lean conditions on all chassis
- Suggested alignment target values when performing a vehicle axle alignment.
- Starter Diagnostics and warranty claim procedure; all engines EXCLUDING Cummins ISB engine with Allison...
- J1939 Data Link Source Address Information
- Rebuilding Cylinder Heads on Certain MaxxForce 11/13, N13, and A26 engines; 2010 to present.
- Diagnosis of chassis wander complaints.
- General Wheel Speed Sensor Troubleshooting
- How to request a horsepower quote; all International and Cummins engines
- J1939 Data Link Troubleshooting
- New air compressor incorporates an oil feed dowel O-ring
- Starter diagnostics and warranty claim procedure for all engines and all chassis EXCLUDING vehicles...
- J1939 Data link source address information
- Pico Scope CCOS (Crankcase Separator Test)
- PicoScope Test 5V & 12V Intermittent Open and Short circuit diagnostics
- PicoScope Test
- PicoScope Test for Datalink (CAN) Health Shorts & opens
- PicoScope Test Resistance and Ohmmeter
- PicoScope Wheel Speed Sensor Test
- PicoScope Test One Channel RCT
- Power Steering Diagnostics Flow / Pressure Specifications For Power Steering Gears and Power Steering Pumps
- Engine Oil Capacities
- Oil leaks at the Bottom of the Oil Filter Module; Only International A26, N13, or 2010 and newer 11 and 13...
- General wheel speed sensor troubleshooting
- Aftertreatment Clamp Corrosion; Single Can Aftertreatment Systems
- Suggested alignment target values when performing a vehicle axle alignment
- ECM Calibration for DPF Replacement; only trucks and busses built with 2007- 2009 MaxxForce DT/9/10....
- Driveline Information Center and Troubleshooting Procedures
- Repair Procedures for Vehicles Struck by Lightning
- Ambient Air Temperature (AAT) Sensor Faults/Location/Diagnostics
- MaxxForce 15L Engine Oil Leaks; an aid in repairing engine oil leaks on the MaxxForce 15L engine.
- A/C Refrigerant and Oil Capacities
- Cleaning and Disinfecting Trucks and Buses
- Stand Alone Real Time (SART) Module Diagnostics
- Oil Capacities; All Electronic International Engines 1994
- Suspension Lean Diagnostics; All models
- Only truck models built with 2010 MaxxForce 15 engine
- Engine Emission Label Replacement, Certificate of Conformance and Clean Idle Sticker Addition Procedure
- Hendrickson Assembly Instructions; Transverse Torque Rods
- Dual steering gear air bleed procedure
- Improved Bushings for Hendrickson Torque Rods
- FLR-10
- Steering Noise in Vehicles Equipped with Dual Steer
- Tool Instruction
- Engine Oil Capacities All Electronic International Engines 1994
- Radio Diagnostics and Information
- Engine Emission Label Replacement, Certificate of Conformance and Clean Idle Sticker Addition Procedure;...
- Updating OnCommand Link with Accelerator
- ISX, N13, and N9 / N10 Aftertreatment Private Data Link Troubleshooting
- Winter Front Usage
- Engine Oil Capacities
- OnCommand EZ-Tech
- Using Supplier Software to Check DTCs
- Trailer Auxiliary Switch Lamp Burning Out; Only Vehicles Equipped with Feature Code 0008TTH or 0008THG
- Steering Noise in Vehicles Equipped with Dual Steer; only Severe Service Chassis with the Sheppard Dual...
- NEW Ultrasonic DEF Tank Sending Unit; only models with SCR Aftertreatment system.
- Urea Quality Sensor (UQS) Supplemental Diagnostic and Service Information; only models with SCR...
- HVAC fault 2609-19 with 4th Gen BCM; Only models equipped with 4th generation BCM
- Steering Noise in Vehicles Equipped with Dual Steer; Only models equipped with dual steering gear
- Dealer EZ-Tech and Diagnostic Software Support Resource Center
- CPA Injector Misfire Detection; Only models with 2004 thru 2017 International engines.
- OnCommand EZTech
- Cylinder Performance Analyzer (CPA) Resource Center; Only models with 2004 thru 2017 International engines.
- OnCommand EZ-Tech Download Center
- Steering Shake, Shimmy, Shudder, or Steering Vibration; only with 14k front weight rated axles and below
- Steering Fluids
- Cooling System Flush Procedure
- The on board diagnostic (OBD) data stored for purposes of defining required maintenance or repair may be...
- Radiator internal restriction and flush procedure
- Performing relative compression test and misfire test with cpa tool
- Misfire diagnostics ibb; SPN132(X)
- Davco fuel pro 382 technical manual, installation, diagnostics, and service
- Exhaust manifold service procedures
- Service parts damaged new turbocharger oil supply tube
- Fan Shaft Failure Diagnostics with feature code 12THX (Viscous Fan Drive)
- Retrofiting a Horton VMaster(Stratis) fan drive to Horton 2spd air operated fan drive on N13 or MaxxForce...
- Vibration Troubleshooting
- Change in Seat Belt Manufacturer
- Standard to Heavy Duty Brake Chamber Replacement
- Mirror Repair Procedures and Replacement Parts Availability
- Retrofiting a Horton VMaster(Stratis) fan drive to Horton 2spd air operated fan drive on MaxxForce 13 and...
- N13, MaxxForce 11, 13 engine Two Cylinder Air Compressor Testing
- Models with APADS; Air Conditioning APADS codes
- ESPAR AirTronic Low Run Time.
- DPF Snap Accel Test
- Mirror repair procedures and replacement parts availability
- Low power no MIL diagnostics
- Cluster Software Update Instructions
- MaxxForce 15 ECM recalibration to improve exhaust aftertreatment, Exhaust Gas Recirculation (EGR) valve,...
- Shifter may disengage
- Cluster Issues
- International: there are issues of missing complete engine air supply line and also missing t fitting with...
- New Synthetic Oil for Eaton and Spicer Transmissions; only with Eaton or Spicer transmissions
- Circuit and Installation Diagrams For 5000; Only Models With the Allison Gen 4 HD Transmission...
- LUK/Ixetic Power Steering Pump Fittings; only Vehicles equipped with Maxxforce 11, 13 engines
- ZF Sachs Twin XTend clutch; only Vehicles with heavy-duty ZF Sachs Twin XTend Clutch
- Seat Switch Operation, Testing, Diagnostics and Replacement
- Erratic rear lighting, water pump and back up alarm in combination
- Navistar: some vehicles are experiencing headlight condensation or frost in the vehicles
- Water In Fuel (WIF) Message Blinking in Dash Message Center at Key On; only models with International Engines
- Navistar truck: when bellows are bent out of form CAN cause damage to exhaust bellows
- Exhaust Bellows Damage; only models equipped with bellows exhaust pipe.
- Ethylene Glycol Coolant Color Change to be Phased-In Approximately April 1, 2004
- Fan Blade Failures
- Phosphate Conditioner Required When Replacing Radiators; only models with EPA 2009.5, 2009.75 and 2010...
- Mirror Repair Procedures and Replacement Parts Availability; only models with Lang Mekra Mirrors
- Deaeration Tank Hose Re-Route Engine Parameter Download Instructions; Only models marked with AFC12917
- Deaeration Tank Hose Re-Route Engine Parameter Download Instructions
- Meritor Front Brake Return Spring Install
- Certain 2010, 2011, and 2012 model year MaxxForce® 11 engines do not meet EPA emissions requirements.
- Remote Engine Speed Control Module (RESCM) Troubleshooting; Only trucks equipped with RESCM
- Of a new chassis with a frame bow; only chassis equipped with "dogbone" style crossmembers
- Navistar: emissions recall on certain trucks that do not meet emissions requirements and need installed an...
- Navistar: some vehicles may experience an improper clutch adjustment specification
- Clutch Service Information; only models with Hydraulic Clutch Systems
- Voltage gauge and or all cluster gauges freeze
- The Doser tube coolant return hose assemblies and coolant hoses have been found to leak.
- First Check to make when Troubleshooting any Body Controller or ESC Issue
- Turn Signal Troubleshooting
- Brake Lights Staying On
- ECM Recalibration to provide engine protection against an increase in engine RPM while vehicle is idling...
- Air Pressure Gauges and A/C Pressure Transducer Troubleshooting on Post-2007 HPV and ProStar
- Headlight Operation and Troubleshooting; only Post 2007 Vehicles Built with a Body Controller
- Navistar: while idling in park and not moving, engine's RPM would increase and to reduce back pressure...
- ECM recalibration to provide engine overspeed protection (only in a parked state or if the vehicle is not...
- Air Control Valve (ACV) Connector with Plugs Installed Backwards in Empty Connector Cavities; Only models...
- Exhaust Gas Recirculation (EGR) Valve Replacement; Only models equipped with MaxxForce 11 or 13 engines
- Aftertreatment Resource Center; All models equipped with EPA 2007 and newer engines
- Navistar: 2010 maxxforce 15 high-pressure (HP) fuel pump replacement
- Navistar: replacement pump, for certain hp fuel pumps maxxforce 11 and 13, fell into suspect build period...
- International: information provided regarding the re-routing of alternator wiring to prevent rub points
- Navistar: on certain maxxforce engines, a repair procedure is provided for cracks during truck operation...
- Navistar: the titanx charge air cooler (CAC) hose may fail prematurely during vehicle operation on certain...
- Navistar: HVAC front inside module drain repair and grease application for exhaust gas recirculation (EGR)...
- Navistar: maxxforce 11, 13, and 15 recalibration to adress frequent warning lights
- Navistar: engines on certain vehicles have an idler gear stud that was nitrate coated improperly resulting...
- Navistar: on certain trucks, paystar, with a manual fan switch, the engine's fan is constantly running all...
- Navistar: there is updated ECM software
- Navistar: poor launch concerns and stored trouble codes
- Navistar: there are air control valve trouble codes that CAN be caused by connector vibration, loose...
- Navistar: paystar engine inspection and repair process for the warning lamp, clutch relay, and norgren...
- Navistar: some vehicles built with the 2010 maxxforce engine may experience an inability to service the...
VIN decoder
See the problems and recalls for an exact car
Buying a used 2011 International Paystar?
Check the exact car before you pay: accidents, salvage or flood titles, odometer readings and previous owners.
Check its history