2000 Isuzu FVR Problems: 0 Complaints, 3 Recalls

The worst 2000 Isuzu FVR problems

Ranked by number of owner complaints. Mileage and cost come from what owners wrote.

Tap a problem to see which part fails, at what mileage and in which other years.

Power train: clutch assemblyReported February 12, 2002 · 1,368 vehicles affected

What is wrong: Certain medium duty tilt cab trucks equipped with manual transmissions have a condition in which the clutch master-cylinder pushrod end that attaches to the clutch pedal pin can wear prematurely. The first noticeable effect of this wear could be the clutch pedal not returning completely to the full-up position.
Risk: If this occurs, the fast-idle engine speed control may not function. If the clutch master-cylinder pushrod end wears sufficiently to allow the attaching end to bend open or break off, the pedal pin would detach from the clutch rod link and the clutch would engage. If clutch engagement occurred while the vehicle was stopped, with the engine running and the transmission in gear, and if the brakes were not applied, the vehicle could move forward if the transmission were in a forward gear, or rearward if the transmission were in a reverse gear.
Remedy: Dealers will install a new clutch master-cylinder assembly and clutch pedal assembly. Owner notification is expected to begin during april 2002. Owners who take their vehicles to an authorized dealer on an agreed upon service date and do not receive the free remedy within a reasonable time should contact isuzu at 1‑800‑643‑4070.

Recall number 02V052001 · Recall details

Steering: linkages: tie rod assemblyReported June 15, 2001 · 203 vehicles affected

What is wrong: Vehicle description: commercial vehicles equipped with tie rod assemblies containing 24-dl model ball sockets and manufactured by trw. Certain of the tie rod ball-socket bearings have a below-specification case depth and/or hardness, which can lead to premature wear of the socket.
Risk: If this condition occurs, the driver can lose partial control of the right front wheel, possibly resulting in a crash.
Remedy: Dealers will replace the defective ball sockets and/or drag links. Owner notification began during may 2001. Owners who take their vehicles to an authorized dealer on an agreed upon service date and do not receive the free remedy within a reasonable time should contact isuzu at 800‑643‑4070, ext. 428.

Recall number 01V044012 · Recall details

Steering: linkages: drag: link: connectionReported June 15, 2001 · 203 vehicles affected

What is wrong: Vehicle description: commercial vehicles equipped with axle assemblies which may have been manufactured with trw model 20edl ball sockets/drag links. The tie rod ball-socket bearings have a below specification case depth and/or hardness which can lead to premature wear out of the socket in some applications.
Risk: If this condition occurs, the driver can lose steering control, possibly resulting in a vehicle crash.
Remedy: Dealers will replace the drag link assemblies. Owner notification began during may 2001. Owners who take their vehicles to an authorized dealer on an agreed upon service date and do not receive the free remedy within a reasonable time should contact isuau at 1‑800‑643‑4070, ext. 428.

Recall number 01V140003 · Recall details

Bulletins tell dealers how to fix known problems. A warranty extension means the manufacturer pays for that repair for longer.

Used buying checklistWhat to check on a 2000 Isuzu FVR before you buy

Is the 2000 Isuzu FVR reliable?

Owners have filed 0 complaints about the 2000 Isuzu FVR.

What is the most common problem with the 2000 Isuzu FVR?

There are not enough complaints to tell.

How many recalls does the 2000 Isuzu FVR have?

3 recalls, covering power train and steering.

See the problems and recalls for an exact car

Check the exact car before you pay: accidents, salvage or flood titles, odometer readings and previous owners.