Check a VIN

2005 Kenworth C500 recalls

There are 5 safety recalls on record for the 2005 Kenworth C500, covering 37,593 vehicles in total across all the models in each campaign. Newest first.

All recalls

Service brakes, air: slack adjustersReported March 4, 2008 · 130 vehicles affected
What is wrong
Paccar is recalling 130 my 2005-2007 kenworth c500, t800, w900, and peterbilt models 357 and 379 tractor trailers equipped with fabco slack adjusters on sisu axles. The slack adjusters may fail as a result of a fatigue crack rendering the slack adjuster inoperative. This could reduce braking effectiveness.
Risk
Reduction in braking capacity could increase the risk of a crash.
Remedy
Dealers will inspect and replace the slack adjusters free of charge. The recall began on march 21, 2008. Owners may contact kenworth at 1‑425‑828‑5440 and peterbilt at 1‑940‑591‑4196.

Recall number 08V099000 · Recall details

Power train: automatic transmissionReported March 16, 2007 · 4,592 vehicles affected
What is wrong
On certain trucks, the wiring, parts, or transmission programming required for the auto neutral feature to function as designed were either not installed, connected, or programmed properly.
Risk
If any of these conditions exists, the transmission will not automatically shift into neutral when left in drive with the parking brake set engaged. The vehicle could move without warning increasing the risk of a crash.
Remedy
Dealers will inspect the affected vehicles to ensure the auto neutral feature functions properly and, if needed, will make the necessary repairs free of charge. The recall began on may 9, 2007. Owners may contact kenworth at 425‑828‑5440.

Recall number 07V107000 · Recall details

Engine and engine coolingReported December 22, 2005 · 30,995 vehicles affected
What is wrong
On certain tractors equipped with caterpillar diesel engines, the variable valve actuation oil line may wear against the sharp edge of the cylinder head if not positioned correctly.
Risk
The oil line may be cut on the cylinder head causing an oil leak and a possible fire.
Remedy
Caterpillar, in conjunction with paccar, will be conducting the owner notification and remedy for this campaign free of charge. Owners may call caterpillar at 309‑675‑6496, kenworth at 425‑828‑5440, or peterbilt at 940‑591‑4201.

Recall number 05V570000 · Recall details

Suspension: rearReported May 19, 2005 · 850 vehicles affected
What is wrong
On certain trucks and tractors equipped with airglide high-articulation rear suspensions, the c65-1006 sway bar used in this rear suspension may experience a reduction in fatigue life due to either a manufacturing process or a high induced stress during an extreme suspension articulation event.
Risk
Both of these conditions can lead to a failure of the sway bar which could cause the rear axle to come loose, increasing the risk of a crash.
Remedy
The inspection and repair of these vehicles will depend on the type of vehicle (tractor or truck) and the intended service application. This inspection and repair criteria will be forthcoming. The recall began on june 30, 2005. Owners may contact kenworth at 1‑425‑828‑5440.

Recall number 05V237000 · Recall details

SuspensionReported April 28, 2005 · 1,026 vehicles affected
What is wrong
On certain heavy duty class 8 trucks, the suspension has transverse beam castings that may fracture under normal loads. If a casting breaks when the vehicle is traveling on a roadway there is the potential for pieces of the casting to become projectiles and the suspension's transverse beam may drop down low enough to contact the road surface.
Risk
This could cause sparks that could potentially ignite and cause a fire.
Remedy
Dealers will inspect and replace the defective transverse beam assemblies free of charge. The recall began on june 10, 2005, with letters being mailed to peterbilt owners; and on june 17, 2005, for kenworth owners. Owners may contact peterbilt at 940‑591‑4201 or kenworth at 425‑828‑5440.

Recall number 05V189000 · Recall details

Questions about the 2005 Kenworth C500 recalls

How do I check if my 2005 Kenworth C500 has an open recall?

Enter your VIN in the VIN decoder on this page to see the recalls for your exact model and year, then confirm with any dealer of the brand or the manufacturer, who can tell you whether the repair was already done on your car.

Do I have to pay for a recall repair?

No. Safety recall repairs are free at any authorized dealer of the brand, even if the car is out of warranty or you are not the first owner.

How many recalls does the 2005 Kenworth C500 have?

5, covering service brakes, air, power train and engine and engine cooling.

VIN decoder

See the problems and recalls for an exact car

Buying a used 2005 Kenworth C500?

Check the exact car before you pay: accidents, salvage or flood titles, odometer readings and previous owners.

Check its history