2019 Kenworth C500 recalls

There are 4 safety recalls on record for the 2019 Kenworth C500, covering 86,817 vehicles in total across all the models in each campaign. Newest first.

All recalls

Service brakes, air: supply: reservoir/tankReported February 23, 2024 · 936 vehicles affected

What is wrong: PACCAR Incorporated (PACCAR) is recalling certain 2009-2021 Kenworth C500, 2012-2021 Kenworth T440, 2009-2015 Kenworth T660, 2015-2024 Kenworth T680, 2009-2024 Kenworth T800, 2009-2020 Kenworth T370, 2014-2023 Kenworth T880, 2011-2016 Kenworth T470, 2023 Kenworth T480, and 2009-2019 Kenworth W900 vehicles. The air tanks have an insufficient volume of air for the brake system. As such, these vehicles fail to comply with the requirements of Federal Motor Vehicle Safety Standard number 121, "Air Brake Systems."
Risk: Insufficient air volume can reduce braking performance and increase the risk of a crash.
Remedy: Dealers will install the correct volume air tanks, free of charge. Owner notification letters were mailed August 12, 2024. Additional owner notification letters were mailed October 27, 2025. Owners may contact PACCAR customer service at 1‑425‑828‑5888. PACCAR's number for this recall is 24KWD.

Recall number 24V145000 · Recall details

Power train: clutch assemblyReported December 21, 2018 · 25,556 vehicles affected

What is wrong: PACCAR Incorporated (PACCAR) is recalling certain 2018-2019 Peterbilt 337, 348, 365, 367, 389, 567, 579 and 587 trucks and 2018-2019 Kenworth C500, T270, T370, T440, T660, T680, T800, T880 and W900 trucks equipped with automated manual transmissions. An internal component in the clutch assembly may fail, possibly resulting in unintended vehicle movement.
Risk: Unintended movement of a vehicle can increase the risk of a crash.
Remedy: PACCAR will notify owners, and dealers will update the transmission control module, free of charge. The recall began February 23, 2019. Owners may contact PACCAR customer service at 1‑940‑591‑4220. PACCAR's numbers for this recall are 18PBE and 18KWH.

Recall number 18V931000 · Recall details

Engine and engine cooling: engine: dieselReported September 21, 2018 · 48,896 vehicles affected

What is wrong: PACCAR Incorporated (PACCAR) is recalling certain 2017-2019 Kenworth C500, T600, T660, T680, T800, T880 and W900 trucks, as well as Peterbilt 367, 386, 389, 567, 579 and 587 trucks, equipped with Cummins ISX15 or X15 diesel engines. In certain driving conditions, such as on a long down-hill grade, the fuel line may burst if the fuel pump cooling circuit screen becomes restricted.
Risk: If the fuel line bursts, fuel may leak onto the road resulting in a roadway hazard for other motorists. The engine may also stall without warning, resulting in the vehicle's inability to restart, increasing the risk of a crash.
Remedy: Cummins will notify owners, and dealers will replace the suspect fuel pump cooling circuit screen, free of charge. The recall began November 21, 2018. Owners may contact PACCAR customer service at 1‑940‑591‑4220. PACCAR's number for this recall is 18E081.

Recall number 18V657000 · Recall details

Electrical system: wiringReported August 22, 2018 · 11,429 vehicles affected

What is wrong: PACCAR Incorporated (PACCAR) is recalling certain 2016-2019 Kenworth C500, T660, T800, and W900 vehicles, equipped with 1.9M ISX15 engines. The engine harnesses may have been manufactured without check engine light (CEL) and stop engine light (SEL) circuits, preventing the driver from being warned of a serious engine problem.
Risk: If the driver is not warned of a serious engine problem, the engine may unexpectedly fail, increasing the risk of a crash.
Remedy: PACCAR will notify owners, and dealers will inspect or test the ISX15 engine harness, and install an overlay jumper harness to supply the missing CEL and SEL circuits, free of charge. The recall began November 30, 2018. Owners may contact PACCAR customer service at 1‑918‑259‑3258. PACCAR's number for this recall is 18KWE.

Recall number 18V555000 · Recall details

Questions about the 2019 Kenworth C500 recalls

How do I check if my 2019 Kenworth C500 has an open recall?

Enter your VIN in the VIN decoder on this page to see the recalls for your exact model and year, then confirm with any dealer of the brand or the manufacturer, who can tell you whether the repair was already done on your car.

Do I have to pay for a recall repair?

No. Safety recall repairs are free at any authorized dealer of the brand, even if the car is out of warranty or you are not the first owner.

How many recalls does the 2019 Kenworth C500 have?

4, covering service brakes, air, power train and engine and engine cooling.

VIN decoder

See the problems and recalls for an exact car

Buying a used 2019 Kenworth C500?

Check the exact car before you pay: accidents, salvage or flood titles, odometer readings and previous owners.

Check its history