2021 Kenworth T800B recalls

There are 5 safety recalls on record for the 2021 Kenworth T800B, covering 226,446 vehicles in total across all the models in each campaign. Newest first.

All recalls

Electrical system: softwareReported December 9, 2024 · 220,764 vehicles affected

What is wrong: PACCAR Incorporated (PACCAR) is recalling certain 2021-2025 Peterbilt and Kenworth vehicles, equipped with Bendix EC80 Advanced Electronic Control Units (ECU). Please see the recall report for a complete list of models. Electrical noise and low signal to the power line carrier may cause the ECU to incorrectly process commands or stop functioning.
Risk: Safety systems that depend on the ECU (Automatic Traction Control, ABS, Electronic Stability Control, Active Cruise Control, and Collison Mitigation System) may not function properly or at all, increasing the risk of a crash.
Remedy: Dealers will reprogram the ECU software, free of charge. Owner notification letters were mailed February 3, 2025. Owners may contact Kenworth's customer service at 1‑425‑828‑5888 and Peterbilt's customer service at 1‑940‑591‑4220. PACCAR's numbers for this recall are 24KWL and 24PBL.

Recall number 24V915000 · Recall details

Seat beltsReported October 26, 2023 · 3,841 vehicles affected

What is wrong: PACCAR Incorporated (PACCAR) is recalling certain 2020 Kenworth T660, 2018-2024 Kenworth T800 and W900 vehicles. An additional spacer may have been added to the joint that connects the seat to the seat belt tether and buckle, causing an unsecured connection.
Risk: An unsecured seat belt connection may not properly restrain an occupant during a crash, increasing their risk of injury.
Remedy: Dealers will inspect and remove the additional spacer and replace the bolt, as necessary, free of charge. Owner letters were mailed March 20, 2024. Owners may contact PACCAR's customer service at 1‑425‑828‑5888. PACCAR's number for this recall is 23KWK.

Recall number 23V717000 · Recall details

Fuel system, diesel: fuel injection system: fuel railReported May 26, 2021 · 612 vehicles affected

What is wrong: PACCAR Incorporated (PACCAR) is recalling certain 2018-2021 Peterbilt 337, 348, 365, 367, 520, 567, Kenworth T270, T370, T440, T470, T800 and T880 vehicles. The sealing washer may not seat correctly in the pilot bore holes, allowing the high pressure fuel rail assembly to leak.
Risk: A fuel leak in the presence of an ignition source increases the risk of a fire.
Remedy: Dealers will inspect the rail threads and fuel lines, and replace the rail as necessary, free of charge. Owners may contact PACCAR customer service at 1‑425‑828‑5888 (Kenworth) or 1‑940‑591‑4220 (Peterbilt). PACCAR's numbers for this recall are 21KWC and 21PBD.

Recall number 21V391000 · Recall details

EngineReported February 17, 2021 · 132 vehicles affected

What is wrong: PACCAR Incorporated (PACCAR) is recalling certain 2021-2022 Kenworth T680, T880, W990, T800, W900 and Peterbilt 579, 567, 389, 367 vehicles equipped with a Cummins X15 engine. The capscrews that attach the flywheel to the crankshaft may have been improperly torqued, allowing the flywheel to detach.
Risk: A detached flywheel can cause loss of drive power, increasing the risk of a crash. Additionally, driveline pieces may be ejected from the engine compartment, increasing the risk of injury.
Remedy: PACCAR will notify owners, and dealers will properly torque the capscrews and the engine will also be inspected for damage and, if necessary, repaired, free of charge. The recall began on March 29, 2021. Owners may contact PACCAR customer service at 1‑425‑828‑5888 (Kenworth) or 1‑940‑591‑4220 (Peterbilt). PACCAR's numbers for this recall are 21KWA and 21PBB.

Recall number 21V080000 · Recall details

Power train: axle assemblyReported August 26, 2020 · 1,097 vehicles affected

What is wrong: PACCAR Incorporated (PACCAR) is recalling certain 2020-2021 Peterbilt 348, 365, 367, 389, 520, 567 and Kenworth T800, T880, W900, W990 vehicles equipped with Watson and Chalin steerable lift axle suspension systems (model SL2065). The axles may have lower rear pivot bolts that are not long enough to sufficiently engage the locking feature of the corresponding nuts.
Risk: The short screws can cause the hardware to separate from the suspension system and become road hazards, increasing the risk of a crash and/or injury.
Remedy: PACCAR will notify owners, and dealers will inspect suspect chassis and replace the pivot bolts, as necessary, free of charge. The recall began September 29, 2020. Owners may contact Kenworth customer service at 1‑425‑828‑5888 and Peterbilt customer service at 1‑940‑591‑4220. PACCAR's numbers for this recall is 20PBE and 20KWC.

Recall number 20V506000 · Recall details

Questions about the 2021 Kenworth T800B recalls

How do I check if my 2021 Kenworth T800B has an open recall?

Enter your VIN in the VIN decoder on this page to see the recalls for your exact model and year, then confirm with any dealer of the brand or the manufacturer, who can tell you whether the repair was already done on your car.

Do I have to pay for a recall repair?

No. Safety recall repairs are free at any authorized dealer of the brand, even if the car is out of warranty or you are not the first owner.

How many recalls does the 2021 Kenworth T800B have?

5, covering electrical system, seat belts and fuel system, diesel.

VIN decoder

See the problems and recalls for an exact car

Buying a used 2021 Kenworth T800B?

Check the exact car before you pay: accidents, salvage or flood titles, odometer readings and previous owners.

Check its history