1999 Mack CX recalls

There are 7 safety recalls on record for the 1999 Mack CX, covering 94,383 vehicles in total across all the models in each campaign. Newest first.

All recalls

Exterior lighting: headlights: switchReported December 23, 2008 · 34,269 vehicles affected

What is wrong: Mack is recalling 34,269 my 1999-2005 cx and my 2004-2008 cxn trucks. The headlight switch may prematurely fail resulting in inoperative or intermittent headlights.
Risk: The head lights may not operate properly which could result in intermittent or no headlight function. This could impair a driver's visibility, increasing the risk of a crash.
Remedy: Dealers will replace the headlight switch. The recall began on february 27, 2009. Owners may contact mack at 1‑800‑528‑6586.

Recall number 08V688000 · Recall details

Suspension: front: hubReported June 3, 2003 · 998 vehicles affected

What is wrong: On certain heavytrucks equipped with truck hub units manufactured by skf exclusively for use on arvinmeritor's ff98x series non-drive steer axles, the hub unit bearings can wear prematurely.
Risk: Seizure of the bearings can cause wheel separation or wheel end fire.
Remedy: Dealers will replace all front axle hubs. Owner notification began on oactober 14, 2003. Customers will be informed of parts availability by october 3, 2003. Owners who take their vehicles to an authorized dealer on an agreed upon service date and do not receive the free remedy within a reasonable time should contact mack at 610‑709‑3337.

Recall number 03V201000 · Recall details

Steering: linkages: tie rod assemblyReported August 15, 2002 · 2,050 vehicles affected

What is wrong: On some heavy duty class 8 vehicles equipped with arvinmeritor axle assemblies which may have been manufactured with trw model 20edl ball sockets, the tie rod ball-socket bearings have a below specification case depth and/or hardness which can lead to premature wear out of the socket in some applications.
Risk: If this condition occurs, the driver can lose steering control, possibly resulting in a vehicle crash.
Remedy: Dealers will replace the ball socket assemblies. This campaign will supersede the federal safety agency recall nos. 01v‑140-005 (mack sc0270) and 00v‑246-103 (mack sc0262). Owner notification began december 27, 2002. Owners who take their vehicles to an authorized dealer on an agreed upon service date and do not receive the free remedy within a reasonable time should contact mack at 610‑709‑3337.

Recall number 02V037006 · Recall details

Steering: linkages: drag: link: connectionReported March 14, 2001 · 4,247 vehicles affected

What is wrong: Vehicle description: heavy duty trucks equipped with drag link assemblies containing 24-dl model ball sockets and manufactured by trw. Certain of the tie rod ball-socket bearings have a below-specification case depth and/or hardness, which can lead to premature wear of the socket.
Risk: If this condition occurs, the driver can lose partial control of the right front wheel, possibly resulting in a crash.
Remedy: Dealers will replace the defective drag links. Owner/distributor notification began august 30, 2001. Owners who take their vehicles to an authorized dealer on an agreed upon service date and do not receive the free remedy within a reasonable time should contact mack at 1‑610‑709‑3011 or trw customer service at 1‑866‑280‑3287.

Recall number 01V044207 · Recall details

Vehicle speed control: accelerator pedalReported October 4, 2000 · 45,866 vehicles affected

What is wrong: Vehicle description: class 8 trucks equipped with felsted electronic accelerator pedals. The return springs can break on the accelerator pedals that are equipped with stainless steel or electroplated wire return springs.
Risk: This condition could cause the pedal to go to full throttle if both return springs break, increasing the risk of a crash.
Remedy: Replacement accelerator pedals equipped with return springs manufactured of music wire with one additional coil on each spring and with an organic coating, eliminating electroplating will be installed.

Recall number 00V230003 · Recall details

Steering: linkages: tie rod assemblyReported October 4, 2000 · 6,244 vehicles affected

What is wrong: Vehicle description: heavy duty trucks equipped with trw tie rod ends on certain meritor axles. The tie rod and drag link ball stud ends contain bearings that are below the specified case depth and/or hardness.
Risk: This can lead to premature wear with possible separation of the ball stud from the socket, increasing the risk of loss of control of the vehicle.
Remedy: Dealers will remove and replace all affected tie rods and drag links with different designed ends.

Recall number 00V246103 · Recall details

Exterior lighting: headlightsReported January 31, 2000 · 709 vehicles affected

What is wrong: Vehicle description: certain heavy duty trucks fail to comply with requirements of fmvss no. 108, "lamps, reflective devices, and associated equipment." the headlamp assemblies have the bulb identification for the low and high beam reversed on the front lens.
Risk: The headlight assemblies do not meet the requirements of the standard.
Remedy: Owners will be provided with a correct label, along with installation instructions.

Recall number 00V024000 · Recall details

Questions about the 1999 Mack CX recalls

How do I check if my 1999 Mack CX has an open recall?

Enter your VIN in the VIN decoder on this page to see the recalls for your exact model and year, then confirm with any dealer of the brand or the manufacturer, who can tell you whether the repair was already done on your car.

Do I have to pay for a recall repair?

No. Safety recall repairs are free at any authorized dealer of the brand, even if the car is out of warranty or you are not the first owner.

How many recalls does the 1999 Mack CX have?

7, covering exterior lighting, suspension and steering.

VIN decoder

See the problems and recalls for an exact car

Buying a used 1999 Mack CX?

Check the exact car before you pay: accidents, salvage or flood titles, odometer readings and previous owners.

Check its history