I had a recall notice from the dealer the cruise control deactivation switch on my truck. I took it to a dealership in tuscaloosa alabama, where they replaced it, but let the wires just hanging loose in the engine, very sloppy work, also prior the recall the switch burnt out melting the cruise control button on the steering wheel, they said they don't cover that even though the switch they recalled caused it.
1999 Mazda B-Series Truck acceleration problems
10 complaints (13% of all complaints for this car).
- owner complaints
- 10
- of this car's complaints
- 13%
- crashes
- 0
- recalls
- 2
Which part fails
- Cruise control3
- Springs1
At what mileage
Complaints by mileage at the time of the problem.
Mazda B-Series Truck acceleration problems in other years
Related recalls
Vehicle speed control
- What is wrong
- On certain trucks equipped with a speed control system, the speed control deactivation switch may, under certain conditions, leak internally and then overheat, smoke, or burn.
- Risk
- This could result in an underhood fire.
- Remedy
- Dealers will install a fused wiring harness. An interim notice was sent to owners on september 7, 2007, directing them to have the speed deactivation control switch disconnected temporarily. A second notification letter to owners was in february 2008 advising them to return to dealers for installation of the repair part. Owners of affected vehicles who did not receive a phase 2 notice and have not had the recall completed will be notified beginning august 6, 2008. Owners may contact mazda at 1‑800‑222‑5500.
Recall number 07V347000 · Recall details
Vehicle speed control
- What is wrong
- Vehicle description: certain 1998-1998 mazda b-series trucks (b2500, b3000 and b4000) equipped with cruise control and built from january 1998 through march 4, 1999. A cruise control cable can interfere with the speed control servo pulley and not allow the throttle to return to idle when disengaging the cruise control.
- Risk
- If the cruise control is used and this condition is present, a stuck throttle could result, which could potentially result in a crash.
- Remedy
- Dealers will replace the cruise control cables. At the present time, the replacement cables are not available. Customers are being advised not to use the cruise control system until a replacement can be made.
Recall number 99V062002 · Recall details
What 1999 Mazda B-Series Truck owners say
Most recent owner complaints, unedited.
Mazda safety recall 4707h on an 1999 mazda b4000 truck. Consumer states that the nearest dealership is over 430 miles.
Tl*the contact owns a 1999 mazda b-series truck. The contact received a recall notice for the federal safety agency campaign id number 07v347000 (vehicle speed control). He has been waiting on the parts for the repair for a year and a half and the dealer is currently stating that the parts are unavailable. The contact was informed not to use his vehicle speed control. He called the dealer over six months ago and stated that they should be the one calling him to inform him when the parts will be available. The contact has experienced tire failure with his original firestone tires. The tires are also on recall and mazda stated that he should replace the tires. Mazda also stated that they would reimburse him for the tires, but they never did. The tire information was unavailable. The VIN was unknown. The failure mileage was 82,000.
Tl*the contact owns a 1999 mazda b3000. The contact received a ford recall notice in october of 2007 for the vehicle speed control: cruise control. He immediately scheduled an appointment to have the vehicle repaired. The cruise control switch was disconnected and he was informed that the parts would be available in four to six weeks. He called the dealer again and they stated that the parts would take a few additional weeks to arrive. As of february 2008, the contact has yet to receive a part. There had been no failure to date. The recall number was unknown. The current mileage was 103,000.
This is about an already existing recall for mazda 1998-2002 b-series cruise control deactivation switch safety recall 4707h. I have spoken with mazda representative several times. The problem is that they are telling me to take my truck down to the nearest dealer and they will fix the problem. That is fine except the nearest dealer to me is over 200 miles away. According the letter I got it states there is a possibility of an underhood fire. I don't feel it is safe to be driving my truck that far if it could result in a fire. I have tried repeatedly just to get the part sent to me when it becomes available and I will have it fixed locally. Mazda refuses to send the part saying that the federal safety agency will only allow mazda dealerships to install the part. If this is true there are plenty of people in my situation who just are not going to get the problem fixed and continue driving there trucks with this problem because the distance to the nearest dealer is to great and doesn't make sense when the part could be shipped directly to them and installed by a qualified ase mechanic. All I would like is to have the replacement part sent to me. After all it was the manufacturer's mistake and I am the one who is suffering from it.
Tl*the contact owns a 1999 mazda b3000. The contact stated that ford recently issued a recall for the cruise control switch component for his vehicle. He stated that mazda is manufactured on the same assembly line and has the same identical parts as the ford ranger that was recalled. Mazda stated that they have no plans to recall the vehicle or to notify the federal safety agency. The recall stated that a fire could occur. The recall number was unknown. There had been no failure to date. The current mileage was 91,800. Updated 02-01-08 *bf the consumer stated the recall number for the identical ford ranger is the federal safety agency campaign id # 07v336000. Updated 02/01/08
When starting vehicle or coming to a stop vehicle idles high,and will not come down. Consumer has contacted dealer. Please provide any further information.
My truck has started to sound like the lifters are pinging on acceleration.
Return springs rusted and broke causing poor braking and noise.
Consumer received a recall letter . Originally another dealer sold the business to present dealer. Consumer called dealer, and he said parts were not in, and to call back in a few months. Consumer caleed back on 15th of nov 1999, dealer said they would put in order. Dealer now is telling consumer that they need a specific VIN #. Consumer feels dealer should have said this from the beginning. Consumer has not been able to use cruise control since july because the recall letter said it may stick .
Questions about the 1999 Mazda B-Series Truck acceleration
Does the 1999 Mazda B-Series Truck have acceleration problems?
Owners have filed 10 complaints about the acceleration of the 1999 Mazda B-Series Truck, 13% of all its complaints.
At what mileage do 1999 Mazda B-Series Truck acceleration problems start?
Not enough complaints include the mileage to tell.
Was there a recall on the 1999 Mazda B-Series Truck acceleration?
Yes, 2 recalls: 07V347000, 99V062002. Check your VIN to see if your car still needs the free repair.
What year does the Mazda B-Series Truck have the most acceleration problems?
The Mazda B-Series Truck model years with the most acceleration complaints are 1998 (13 complaints), 1994 (12 complaints) and 1999 (10 complaints).
Other 1999 Mazda B-Series Truck problems
Tires 12Body 11Airbags 10Transmission 9Visibility 9Brakes 6Electrical 5Fuel system 5Suspension 5Engine 4Seat belts 2Lights 1Seats 1Steering 1
VIN decoder
See the problems and recalls for an exact car
Buying a used 1999 Mazda B-Series Truck?
Check the exact car before you pay: accidents, salvage or flood titles, odometer readings and previous owners.
Check its history