Mercedes Benz 300 recalls
There are 5 safety recalls on record for the Mercedes Benz 300, covering 159,330 vehicles in total across all the models in each campaign. Newest first.
Mercedes Benz 300 recalls by model year
All recalls
Visibility
- What is wrong
- If one of the headlamp wiper arms becomes misaligned, the wiper balde can lodge in the groove under the headlamp. If the washers are activated with the wiper blade in the misaligned and lodged position, the washer pump will run continuously expelling all available fluid.
- Risk
- Pump operation in the absence of fluid can cause the pump to overheat and cause a vehicle fire.
- Remedy
- Dealers will replace the headlamp washer pump on these vehicles.
Recall number 96V175000 · Recall details
Vehicle speed control
- What is wrong
- Due to heat effects, the throttle bushing located on the accelerator control cable, can fatigue and break, causing the throttle linkage to separate.
- Risk
- If the throttle linkage separates, the engine will returnto idle speed, and remain at idle, with no acceleration ability. Loss of enginespeed without prior warning could lead to loss of vehicle control and anaccident.
- Remedy
- Replace the throttle bushing with a new bushing made from more heat-resistant materials.
Recall number 93V095000 · Recall details
Equipment: appliance: air conditioner
- What is wrong
- Under certain operating conditions, the plastic cover of the preresistor for the auxiliary fan may melt, possibly igniting the preresistor.
- Risk
- This results in an underhood fire that would be hazardous to occupants.
- Remedy
- Replace the preresistor with version having a metal cover.
Recall number 90V068000 · Recall details
Tires: sidewall
- What is wrong
- Left front and left rear tires may have been damaged by a worn chain drive of the conveyor system.
- Risk
- Damaged or cut tires could fail during use and result in an accident with possible injuries.
- Remedy
- Replace damaged tires with tires of the same brand name.
Recall number 90V062000 · Recall details
Service brakes, hydraulic: foundation components
- What is wrong
- Bolts used for the brake strut support do not meet specifications and may break.
- Risk
- The failure of the bolts may result in a deterioration of vehicle steering and braking which could result in loss of control and an accident.
- Remedy
- Replace hex nut bolts with bolts that meet specifications.
Recall number 90V033000 · Recall details
Questions about the Mercedes Benz 300 recalls
How do I check if my Mercedes Benz 300 has an open recall?
Enter your VIN in the VIN decoder on this page to see the recalls for your exact model and year, then confirm with any dealer of the brand or the manufacturer, who can tell you whether the repair was already done on your car.
Do I have to pay for a recall repair?
No. Safety recall repairs are free at any authorized dealer of the brand, even if the car is out of warranty or you are not the first owner.
How many recalls does the Mercedes Benz 300 have?
5, covering visibility, vehicle speed control and equipment.
VIN decoder
See the problems and recalls for an exact car
Buying a used Mercedes Benz 300?
Check the exact car before you pay: accidents, salvage or flood titles, odometer readings and previous owners.
Check its history