2008 Mercedes Benz R problems

What is wrong

Mercedes-benz is recalling 577 my 2008 gl-class, m-class, and r-class vehicles. A defect may exist in the driving pin used to control the oil pressure of the power steering.

Risk

If a defective driving pin exists in a vehicle and the pin breaks during normal vehicle turning, the normally available hydraulic support function will no longer function and steering wheel operation will be limited.

Remedy

Mercedes-benz will replace the steering gears. The recall began on january 28, 2009. Owner may contact mercedes-benz at 1‑800‑367‑6372.

Recall number 08V682000 · Recall details

What is wrong

Mercedes-benz is recalling my 2006-2008 m-class, r-class, my 2005-2009 slk-class, my 2005-2008 c-class, my 2003-2004 and 2006-2008 clk-class, my 2003-2008 e-class, my 2004 and 2008 cl-class, my 2008 cls-class, my 2004 and 2007-2008 s-class, my 2003 g-class, and my 2003-2004, 2006 and 2009 sl-class vehicles. A software calibration number (scn) coding received on the affected vehicles during a recent workshop visit was incorrect. Depending on the model year and model affected, the results of an incorrect scn coding can affect a number of vehicle safety and emission functions including the following types of functions: (1) the fuel gauge readings may be incorrect; (2) a stuck fuel-level sensor may not be displayed in the instrument cluster; (3) the obd system may cause the check engine light to illuminate incorrectly; and, (4) the speedometer may be out of tolerance.

Risk

In the event of a vehicle crash, the electrical fuel pump may not receive a crash signal that is required for the fuel pump to disconnect and prevent future fuel delivery as designed.

Remedy

Dealers will recode the scn free of charge. The recall began on august 30, 2008. Owners may contact mercedes-benz at 1‑800‑367‑6372.

Recall number 08V303000 · Recall details

What is wrong

On certain passenger vehicles equipped with diesel engines, the crankshaft sensor could fail due to separation of bond wires from the lead frame in the sensor. This results in an interruption in the electrical connection in the chip housing of the sensor.

Risk

When this happens, the vehicle may lose power rather than enter a limp-home mode. In addition, the vehicle cannot be restarted after failure of the electrical connection in the sensor, increasing the risk of a crash.

Remedy

Dealers will replace the crankshaft sensor. The recall began on february 4, 2008. Owners may contact mercedes-benz at 1‑800‑367‑6372.

Recall number 08V006000 · Recall details