1997 mercury cougar developed a cracked manifold.***no answer required***. *mr a recall was issued for 1996 and 1997 mercury cougars but the consumer's vehicle was not included due to VIN.
1997 Mercury Cougar engine complaints
Page 2 of 2: complaints 11 to 31 of 31, newest first, as owners wrote them.
The intake manifold cracked, causing the coolant to leak out. Could cause the engine to overheat. Consumer will contact the manufacturer.
The consumer received a recall well over seven years ago, at the time of the recall the consumer was not experiencing any problem with the intake manifold mentioned in the letter. While driving the vehicle, the radiator leaked antifreeze onto the street. The vehicle was towed and according to the recall letter the manifold is cracked. *nm......
The manifold cracked in the same location, overheating the car for the second time. *bf the intake manifold was made of plastic and was recalled. The new manifold was also made of plastic and over time it also failed. The consumer feels the dealer should have installed the new re-designed two piece, half plastic half metal manifold.
Problems with plastic intake manifold.*mr the manifold which was replaced under recall cracked in the same location as the previous faulty manifold which caused the vehicle to overheat.
Consumer complained about a defective part in the intake manifold, which at one time was on recall. No notification was ever received. Manufacturer was contacted, and stated that the warranty expired, and they did not have to honor the recall.
Had catastrophic intake manifold failure while on vacation. Fomoco has a recall on this component (97m91) but refused to provide relief. As I understand the recall of this known problem, ford will only replace when it fails, but it must fail in a specific time frame. This was a silent recall as ford never publicized it. I had attempted a preventative replacement as I was aware of the inherent problem -- again my local mercury dealer (king - gaithersburg, md) would only replace when the manifold failed. Well it did while I was on vacation hundreds of miles from home. As this was a known manufactor's problem from the date of installation, replace must be done when the problem first comes to ford's knowledge. Instead, when issuing the recall (march 1999) ford chose to ignore the problem until the consumer brings it to the dealership's attention. Only then would the dealer acknowledge the recall existed.
The plastic intake manifold on my 1997 mercury cougar failed on 7/13/2004. The coolant leaked into the spark plug socket and grounded the number 2 spark plug, leaked coolant over engine. Left my wife stranded with undriveable car. Subsequent examination of the engine by an ase mechanic revealed a fatigue crack in the intake manifold near the cross-over tube. This is clearly a design flaw. It will cost over $900 to remove and replace the faulty intake manifold. The old part will be available after repairs are affected.
No warning, driving to work under normal conditions when steam and coolant (which could be smelled) came out from under hood, limiting my vision. I had to stop and low coolant level light came on. I had to have car towed home. Took car to a corner mechanic who informed us the intake manifold had cracked and it would cost us $1,200. We were skeptical because on other vehicles we have, this part is cast so it doesn't break. We then had the car towed again to a reputable mechanic that we have used before and he also said the intake manifold was broken. He then had to order a new ford part that cost us $589.17 plus labor of $249.60 and wrecker run of $38.40, for a grand total of $923.12. Upon checking with ford.com, we found out that this has happened to several others and upon speaking with someone over the phone we were informed that there was a "customer satisfaction program, service bulletin 97m91" that would have replaced this defective part at no cost to us, if the part would have broken in the month of may, instead of june 19, when it occurred. We were never aware of such a program and are extremely distressed that such a reputable company as ford would not make this an unlimited warranty knowing that the part will fail and that the replacement part is made of aluminum which is dependable. Why was this not used during manufacturing of the automobile? Surely, the cost then would have been minimal to ford. Could this possibly be reason why it was not made a voluntary recall? We want to be reimbursed for this part, considering we were only 3 weeks out of "97m91."
For no reason at all antifreeze started leaking from the plastic intake manifold in my 1997 cougar with a 4.6l motor. I searched the web and learned that this is a common problem and ford extended the warranty on some plastic intake manifolds. Found all info I could and copied it for the local mercury dealer to repair under warranty. Dropped it off for service, only to get a call that my VIN was not one that was awarded the extended 7 year warranty, even though the length of time we owned this cougar fit the time criteria. Im really disappointed in ford that they are not covering all of their plastic junk manifolds. I called the 800 number for complaints, but the man said I am sorry I can not help you, but I will type your info in our database. So I am no spending $900.00 to repair a car with 82k miles on it for something I would not have expected to have trouble with. To prove that they know there is a problem, they now replace the original manifold with a new part number, and design. They admit it was a bad deal, but still will not help me. I told them that while they were typing my complaint, also type that this is my last ford, and also my families last ford. It's a sad testament for the USA workers. Henry ford would not be pleased. Thank you, [xxx]. *nm information redacted pursuant to the freedom of information act (foia), 5 u.s.c. 552(b)(6).
Recall regarding problems with plastic intake manifold. *mr the original intake manifold was cracked at the front motor. Ford replaced the defective plastic manifold with another defective plastic manifold. The consumer requested reimbursement. *sc
I have a 1997 mercury cougar. After seeing a low coolant light, and stopping the car, I opened the hood and had coolant everywhere! The car was towed to a repair shop and I was told it was a cracked intake manifold. After further research I have found this is a continual problem with ford produced automobiles.
The low coolant warninging light came on and the smell of antifreeze came into the vehicle compartment. The temperature gauge moved to the highest setting. Copious smoke escaped from under the hood of the vehicle. The forward tube of the plastic intake manifold showed a rupture about four inches long on the front of the intake manifold. Reapair cost was $1455, including replacement of the spark plugs, which had been soaked in antifreeze. The texas comission on environmental quality issued a warning to me by letter that a concerned citizen had reported my vehicle was seen emitting excessive smoke and that if I did not take action to repair the vehicle, they would charge me with a violation. The vehicle has been repaired with a new ford intake manifold that has the forward tube made out of aluminum and the rest plastic. Ford refuses to issue a recall on this model saying that human life has not been endangered.
This type of car has a horrible tendancy to blow head-gaskets, which is exactly what happened. I do not understand how there has not been a recall yet.
While driving, the consumer smelled anti freeze fumes inside the vehicle. Antifreeze fumes were affecting the consumer's breathing. *ak a cracked intake manifold, plug wires and a bad exhaust hose had to be replaced. The maf sensor was cleaned and the was antifreeze replaced. *tt
The consumer examined the engine and noticed coolant had leaked due to a cracked intake manifold. *ak *jb
1997 cougar xr7, 4.6liter engine. Cracked intake manifod allows cooling fluid to escape. Problem has been present for over three years but has never been located until lately when fluid loss increased significantly/
While driving at 35mph the vehicle intake plastic manifold over heated with no warning and the consumer was forced to pull over.
We have numerous complaints with this vehicle. One of which is the brakes. Another is the cooling system. There is a recall on the manifold but our local ford dealer wlll not replace even though we have asked them to do so. In addition the engine had a problem which no one could figure out.
Drivers side window regulator failed causing a popping noise when the window is being rolled down. Nlm
Engine thermostat failed. Mjs
VIN decoder
See the problems and recalls for an exact car
Buying a used 1997 Mercury Cougar?
Check the exact car before you pay: accidents, salvage or flood titles, odometer readings and previous owners.
Check its history