2006 Mercury Milan brakes problems

Filed Mar 20, 2025 · Brakes · 166,230 miles · IN

The contact owns a 2006 Mercury Milan. The contact stated that while depressing the brake pedal, there was an extensive amount of time between depressing the brake pedal and when the vehicle would come to a stop. Occasionally, the contact had to pump the brake pedal to assist while stopping the vehicle. There were no warning lights illuminated. The vehicle was included in the federal safety agency Campaign Number: 19V904000 (Service Brakes, Hydraulic,) and the vehicle was repaired; however, the failure persisted. The vehicle was taken to the dealer, who diagnosed the vehicle and determined that the HCU had failed and needed to be replaced. The vehicle was not repaired. The vehicle was taken to another dealer, Ray Skillman Ford (1250 US 31 S, Greenwood, IN 46143), who confirmed the diagnosis. The vehicle was not repaired because the vehicle was no longer covered under the recall. The manufacturer was informed of the failure, and a case was opened. The failure mileage was approximately 166,230.

Filed Aug 8, 2022 · Brakes · 150,000 miles · OR · crash

The contact owns a 2006 Mercury Milan. The contact stated while his 16-year-old daughter was driving in traffic and was making a complete stop while she was depressing on the brake pedal, the vehicle failed to stop. The contact stated that his daughter desperately depressed on the brake pedal and felt the brake pedal travel the floorboard but failed to respond causing her to strike the hitch of the vehicle in front of her causing front damage to the vehicle. No major injuries were reported and no police report was filed. The vehicle was towed to the dealer and the contact explained to the dealer that the vehicle experienced the same failure as recall the federal safety agency Campaign Number: 19V904000 (Service Brakes, Hydraulic), the dealer stated that the VIN was not included in the recall and that there was no failure with the brakes. The manufacturer was not notified of the failure. The failure was approximate 150.000.

Filed Sep 29, 2021 · Airbags, Body · NJ

1. The Airbag light on the driver side is on 2. The vehicle under is extensively rusty 3. Braking is very slow

Filed Apr 13, 2021 · Brakes · 40,000 miles · MD

The federal safety agency recall number: 19v904 applies to my vehicle and is now over a year old. The manufacturer has yet to issue a remedy. This is far too long for a recall to be in place and still not have a fix. Furthermore, the vehicle now has a second recall, 21v158. How long will this all take?

Filed Dec 5, 2020 · Brakes · IL

My break paddle is different than other days, is hard to break from a short distance. Feels like is doesn't want to stop.

Filed Oct 14, 2020 · Brakes · 145,000 miles · PA

Tl* the contact owns a 2006 mercury milan. The contact stated while driving 15 MPH and depressing the brake pedal to the floor, the vehicle failed to stop. The contact stated that the ABS warning light was illuminated. The contact stated the vehicle rolled to a stop. The contact was made aware of the federal safety agency campaign number: 19v904000 (service brakes, hydraulic) however, the part to do the recall repair was unavailable. The vehicle was taken to the local dealer, murray's ford lincoln (3007 blinker pkwy, dubois, pa 15801; (800) 371-6601) where it was confirmed that the part was not yet available. The contact experienced the failure intermittently. The manufacturer had not been informed of failure. The contact stated that the manufacturer exceeded a reasonable amount of time for the recall repair. Vin tool confirms parts not available. The failure mileage was approximately 145,000.

Filed Jan 27, 2020 · Body, Brakes · 130,000 miles · TN · crash · 1 injury

My car did not stop when brake was applied resulting in a crash into the car that was in front of me. Both cars were getting ready to enter the main road from a side street. I was starting to proceed and we had to stop and wait for oncoming traffic when I hit my brakes it did not stop before I hit the car. Recall # 19s54

Filed Apr 26, 2018 · Brakes · 125,000 miles · TX

Pulling into parking space going 10 to 15 MPH. Brake pedal went all the way to floor. Tried again to stop. Brakes held the 2nd time. Local ford dealership came to lot and picked up the car. Ran diagnostics on car and could find no problem with braking system.

Filed Dec 25, 2017 · Brakes, Transmission · OH

Window don't wort r window

Filed Oct 26, 2017 · Brakes · 97,000 miles · FL · crash

In more than one instance the brakes have suddenly gone "soft", making it very difficult to break. One time the driver went over a bumpy area in the road and two other times it occurred when the roads were wet. The most recent incident resulted in rear-ending another car. In the most recent incident, the driver was heading north on governor's square boulevard towards e. Magnolia drive in tallahassee, fl. It was raining lightly and the roads were wet. The driver was within the posted speed limit of 35 MPH. As the driver approached the intersection, the light was red. When the driver hit the brakes the pedal went "soft" and she had to push it as hard as possible to continuing braking. Though the car was slowing, it was not able to stop before the reaching other cars at the intersection. The result was that the car rear-ended another car which then pushed into another car in front. The drivers of the 2 other vehicles stopped, police came, and a crash report was issued. We determined it would be best to leave the car parked until it could be determined if the brakes would recover. When we returned the following day, the brakes appeared to be functioning properly, but in an abundance of caution, the driver is not driving the car. In the previous 2 occurrences of the brake problems, we brought the car to an auto repair shop. The first time, no problems could be found (date could be provided with auto records). The second time (around may 2017), it was diagnosed as a master cylinder and that was part was replaced and the repair completed. Between the first and second incident, the brake system was completely redone as regular maintenance on the car. So, the correction work performed and regular maintenance, were not successful in addressing the issue.