While driving, the ABS, traction control and power steering lights came on. I was coming off the highway and I lost power steering!!! I almost wrecked into the guard rail coming off the exit!!! I got to the light at the bottom of the exit and I had no power steering. I pulled over immediately and called for a tow. I took it to my mechanic and he said the rack and pinion is bad. We looked it up and there are a ton of people with the same year/make/model as me that are getting tier cars fixed under recall. They wont pay for mine because my vin isnt in this campaign. They said take it to Ford for ANOTHER diagnosis just to tell me they will let me know if my car gets added!! Im not paying for another diagnosis when I have one already!! This is a serious safety issue and they arent fixing their product!!! I JUST bought it and its costing me almost $1800 for a repair!!! There was no indications it was bad or I wouldnt have bought it! Ford needs to stand by all of their cars, and get my vin added to the recall and pay for their crappy/shoddy parts!
Mercury Milan abs comes on
215 of the 2,520 owner complaints about the Mercury Milan describe aBS light or ABS activating, most of them for the 2008 model year.
- owner complaints
- 215
- worst model year
- 2008
- typical repair cost reported
- $1,500
- typical mileage
- 95,000
By model year
Often reported together
Brake failure 52Spongy pedal 18Power steering loss 4Hesitation 2Airbag light 2
What owners say
08 merc milan abs did not work and brakes failed almost causing major accidents. I used e brake to stop. Brakes went to floor. Been calling for and dealerships for recalls I find out now about abs malfunctioning noone will fix or get back to me. Leaking brake fluid all around abs module now. Dealerships saying they not fixing abs even on recalls. Ford dealership in East rutherford nj.
Whenever the car engine isn't warm and I slam on the brakes, they barely respond. I have replaced the master cylinder, abs hydraulic module, brake booster, calipers, pads, and rotors, and it still has about 20% normal braking power when the engine is cold. Just got it back from the dealership again. Dealer said no vacuum leak found, no leaks found, abs module checks out fine, and said the check valve passed diagnostics. The problem remains. This has been ongoing for several years now. May have contributed to an accident in 2023. Not sure as my wife was driving. When the engine is warm, the brakes work perfectly.
The contact owns a 2009 Mercury Milan. The contact stated while driving at an undisclosed speed, the brake pedal was depressed and traveled to the floorboard. There was no warning light illuminated. The contact engaged the parking brake to stop the vehicle. The vehicle was restarted. The vehicle was taken to the dealer where it was diagnosed and determined that the ABS hydraulic control unit had failed and needed to be replaced. The vehicle was not repaired. The manufacturer was made aware of the failure and confirmed that the VIN was not included in the federal safety agency Campaign Number: 19V904000 (Service Brakes, Hydraulic). The approximate failure mileage was 100,000.
The contact owns a 2010 Mercury Milan Hybrid. The contact stated while his mother was driving approximately 30 MPH, the brake pedal was depressed and the pedal extended to the floorboard however, the vehicle did not immediately stop. During the failure, the ABS, traction control, and brake warning lights were illuminated. The vehicle was later towed to the local dealer who diagnosed that the HCU and ABS modules were faulty and needed to be replaced. The vehicle was not yet repaired. The contact was informed that the HCU module was no longer available from the manufacturer. The manufacturer was notified of the failure, but no assistance was offered. The contact was informed that the VIN was not included in the federal safety agency Campaign Number: 19V904000 (Service Brakes, Hydraulic). The contact stated that the vehicle had experienced the failure listed in the recall. The failure mileage was 60,539.
The ABS brake function checked out during the recall window on Nov. 2 of 2021. The Ford dealer mechanics purged the brake system with fresh fluid and tested the function. Tested OK. The car was used without issue until recently and now the brake pedal goes down nearly to the floor before the brakes engage. It is shocking at first and once used to that the driver will pump the pedal twice for a firm pedal. A recent visit to a Ford dealer to diagnose the issue revealed that the recall is closed and that there is nothing they can do unless I pay the approximately $1000 to replace the ABS Hydraulic module. My complaint is that Ford customer service wants me to pay for this and then submit the invoice to them for review. Wow, I'm not going to do that, since there is no guarantee of reimbursement. This is a KNOWN SAFETY problem that is not being addressed appropriately. I'm a mechanic. They could send me the part free of charge for a sane resolution. I'd eat the labor charge.
I have a safety recall I did a yr ago at ford dealership in hazelwood at Saint Louis mo I’m reporting them because they never fixed my recall I waited for my part for a while and I believe they never put it on now my ABS is getting worse and I need a recall to be fixed right
The contact owns a 2007 Mercury Milan. The contact stated that she became aware that the VIN was included in the federal safety agency Campaign Number: 19V904000 (Service Brakes, Hydraulic). The vehicle was taken to the dealer, where the braking system was flushed with DOT 4 fluid, and a new brake fluid reservoir cap was installed; however, the contact stated while driving 20 MPH, the brake pedal was depressed but went down to the floorboard and failed to respond. There was no warning light illuminated. The contact stated that she engaged the electronic parking brake, and the vehicle stopped. The contact stated that the failure reoccurred while driving, and there was a stopping distance delay. The vehicle was taken to an independent mechanic, where the brakes were replaced; however, the failure persisted. The vehicle was taken back to the independent mechanic, where it was diagnosed that the ABS module had failed and needed to be replaced. The vehicle was not repaired. The contact related the failure to the recall. The manufacturer was notified of the failure, but no assistance was provided. The failure mileage was approximately 67,000.
Power brake failure, brake pedal goes to the floor, vehicle rolls forward and backward while in park, ABS warning and Trac system warning lights are on and also Brake Service warning light.
The brake system went completely out. The brake pedal has no pressure and goes all the way to the floor. When looking online there are 197 complaints after reading through the first 9D all of them were about the ABS control module. All other repairs regarding to the brakes have already been made with the problem still not being fixed. there were no warning signs of this happening. The brake switch just went out when driving home one day. This has all been diagnosed by a private mechanic. The only thing left to change or repair is the ABS control module.
Related recalls
Service brakes, hydraulic: antilock/traction control/electronic limited slip: control unit/module
- What is wrong
- Ford Motor Company (Ford) is recalling certain 2006-2010 Ford Fusion, Mercury Milan, Lincoln Zephyr and MKZ vehicles. The valves within the ABS Hydraulic Control Units (HCU) may react with brake fluids containing specific corrosion preventative additives. This reaction may cause the valves to not close properly.
- Risk
- If the valves do not properly close, additional brake pedal travel may be required to stop the vehicle, increasing the risk of a crash.
- Remedy
- Ford will notify owners, and dealers will flush the brake system with DOT 4 fluid and install a new brake fluid reservoir cap. In addition, the HCU will be tested to detect a possible stuck valve condition, replacing the HCU as necessary. All services will be performed free of charge. The recall began April 1, 2021. Owners may contact Ford customer service at 1‑866‑436‑7332. Ford's number for this recall is 19S54.
Recall number 19V904000 · Recall details
Questions about the Mercury Milan abs
Why does the abs come on in the Mercury Milan?
Owners who report it most often also describe brake failure, soft or spongy brake pedal and loss of power steering.
Which Mercury Milan years have aBS light or ABS activating problems?
The model years with the most reports are 2008 (79 complaints), 2007 (55 complaints) and 2010 (39 complaints).
How much does it cost to fix ABS light or ABS activating on the Mercury Milan?
Owners who mentioned a price put the repair at about $1,500 (median of 25 complaints that include a dollar amount). Costs vary with mileage, warranty and where the work is done.
VIN decoder
See the problems and recalls for an exact car
Buying a used Mercury Milan?
Check the exact car before you pay: accidents, salvage or flood titles, odometer readings and previous owners.
Check its history