The car started flashing a warning sign and loosing power. When trying to accelerate it stops. Eventually it puts the car into a limp mode and will stall altogether. This happens any long distance trip. My car year and model is not the only Lancer being effected by this computer glitch. It’s very dangerous due to the fact that the cars loosing power while you’re driving. It doesn’t matter if you’re in the middle of the highway it will just stop working. All research I have done points to an error within the computer that tells the car when to cool down the transmission. I have seen many blogs, forums and actually know another Lancer owner who’s model is a 2012 and has the exact same issue. I don’t know why this hasn’t been addressed yet when it’s affecting more than just one Lancer here or there. Bad for the engine bad for the transmission bad for my travel. And the worst part is that any mechanic is unable to detect the issue unless the car is actively coding. I’ve had this car for 3 years now and I feel it’s a big safety concern and needs to looked into. First occurrence was on a trip down to a local lake car stalled on the side of a highway this was in 2018. Now any trip further than over 30 miles or more the car will throw this code it looks like a gear and it has a exclamation point in the middle. It’s progressively getting worse and effecting the over all performance more each time I wish to travel. Please find out why this issue is occurring in multiple years of the same model of car because it inconvenient and dangerous. I would hate for myself and my kids to get killed in an accident due to not being able to get out of the way of a bigger vehicle or a truck.
Mitsubishi Lancer stalling problems
35 of the 865 owner complaints about the Mitsubishi Lancer describe engine stalls while driving, most of them for the 2009 model year.
- owner complaints
- 35
- worst model year
- 2009
- typical mileage
- 70,000
By model year
Often reported together
Headlights 5Jerking 3Warning lights 2Overheating 2Hesitation 2Engine failure 2ABS 2Won't start 1
Trouble codes mentioned
P0420 1
What owners say
About 3 weeks ago I notice that the driver seat belt didn’t wanted to click to fasten the seat belt. I notice for sometime now that the car sometimes. Kind of stall then you have to step on the gas pedal to proceed and I’m afraid someone will hit me from the back because it doesn’t go when it’s suppose to also like when you turn it stalls and then you give it gas and it goes then
The contact owns a 2016 Mitsubishi Lancer. The contact stated that while driving at various speeds, the vehicle would hesitate upon depression of the accelerator pedal without warning. The contact then stated that while at a complete stop, the vehicle stalled without warning. After multiple failed attempts to restart the vehicle, the contact towed it to his home where it remained. The contact called the manufacturer on multiple occasions and was initially informed that his vehicle was previously included in the federal safety agency Campaign Number: 16V563000 (Power Train) however, no further assistance could be offered because of the prior recall repair. The vehicle had yet to be repaired. The failure mileage was approximately 40,000.
the federal safety agency safety report 06/2021 — while driving approximately 45-50 mph, the ABS warning light and traction control light suddenly came on the display so I reduced speed and had planned to proceed to the next service station which was approximately 1.5 miles away. However, when I was approximately 1/2 mile from the station the engine stalled, the vehicle slightly jerked, and the the engine died. At this point, I shifted into neutral and cruised a couple hundred feet to a safe pull-off point. Upon inspection of the vehicle, the battery was completely dead and would not hold a charge when jumped. This prompted me to check the alternator where I noticed the loose belt and broken tensioner which I had repaired at my own expense the following day.
Tl* the contact owns a 2014 mitsubishi lancer. The contact stated that while driving at various speeds, slow down message displayed on the instrument panel as the vehicle stalled. The vehicle was pulled over and restarted and operated as designed. The vehicle was taken to an independent mechanic to be diagnosed. The contact was informed that the transmission was defective and needed to be repaired or replaced. The vehicle was not repaired. Neither the dealer nor the manufacturer were notified of the failure. The failure mileage was unknown.
Tl* the contact owns a 2009 mitsubishi lancer. The contact stated that the vehicle would stall and overheat while driving various speeds without warning. The contact took the vehicle back to the independent mechanic from where it was purchased. The mechanic gave her a $200 reimbursement towards the repair of the vehicle. The contact took the vehicle to another independent mechanic where she was informed that the vehicle needed a new catalytic converter. The vehicle was repaired, but the failures recurred soon after, including shaking and jerking without warning. The contact took the vehicle to another mechanic where she was informed that the vehicle needed an entire new engine. The contact discovered that the vehicle was included in the federal safety agency campaign numbers: 18v069000 (engine and engine cooling), 14v562000 (engine and engine cooling), and 12e012000 (exterior lighting). The contact had not taken the vehicle to a dealer to have the recalls repaired. The manufacturer was not notified of the recalls or the failures. The vehicle was not repaired. The failure mileage was 167,000.
When you go to you press on the gas it starts to stall out. This started 24 hours after I drive off from used car lot. And upon further review, it did have a recall and they said they fixed it. However it's doing exactly what the recall states.its dangerous and I have been close to getting hit because the car stalls out.
Vehicle has overheated on the highway,. Once it did turn off while driving on the highway while I was driving my children to school. I have had to replace the battery more often, even though the batteries were still good. There is an issue with diagnostic code p0420, it seems to be the catalyst converter and 02 sensors in take and out take. When the air conditioner is on the vehicle makes a loud clicking noise and sometimes the vehicle turns off. When I reverse, the vehicle also turns off.
Tl* the contact owns a 2012 mitsubishi lancer. While driving approximately 30-40 MPH, the accelerator pedal was depressed; however, there was a hesitation before the vehicle responded. The vehicle did not stall. Additionally, there was a rattling sound underneath the vehicle in close proximity to the engine. The vehicle was taken to expressway mitsubishi (located at 5511 e indiana st, evansville, in 47715, (866)437-9750) where it was diagnosed that the catalytic converter needed to be replaced. The vehicle was not repaired. The manufacturer was informed of the failure. The approximate failure mileage was 80,839.
When I accelerate the car stalls.and then it jerks when you do accelerate and this morning it stalled out on the highway and I almost got hit I have contacted the used car lot that I just purchased this car from to complain about this issue I've had the car for three days and I've called in 24 hours after I bought the car it's dangerous.in this happens in subdivisions it happens in residential areas on the highway every time you go to accelerate the car jerks and then acts like it wants to stall out and then this morning.
Related recalls
Engine and engine cooling: engine: gasoline: belts and associated pulleys
- What is wrong
- Mitsubishi Motors North America, Inc. (MMNA) is recalling certain 2009-2012 Lancer, 2008-2012 Outlander, 2010-2012 Lancer Sportback, and 2011-2012 Outlander Sport vehicles equipped with either a 4B11 or 4B12 engine. The drive belt automatic tensioner flange may crack, allowing the accessory drive belt to detach.
- Risk
- If the drive belt detaches, the battery will discharge and the engine will stall, increasing the risk of a crash.
- Remedy
- MMNA will notify owners, and dealers will replace the belt tensioner with one that has an improved shape, free of charge. The recall is expected to begin March 27, 2018. Owners may contact MMNA customer service at 1‑888‑648‑7820. MMNA's number for this recall is SR-18-001.
Recall number 18V069000 · Recall details
Engine and engine cooling: engine: gasoline: belts and associated pulleys
- What is wrong
- Mitsubishi Motors North America, Inc. (Mitsubishi) is recalling certain model year 2008-2011 Lancer, Lancer Evolution, and Outlander; 2009-2011 Lancer Sportback, Lancer Rilliart, and Lancer Sportback Ralliart; and 2011 Outlander Sport vehicles. The affected vehicles, manufactured with 4B1 engines, have an engine pulley and belt arrangement for turning the alternator, the cooling fan and the power steering pump (if equipped). These pulleys may experience unusual wear and allow for belt detachment.
- Risk
- If the drive belt detaches, the battery may discharge, resulting in an engine stall, increasing the risk of a crash.
- Remedy
- Mitsubishi will notify owners, and dealers will replace the drive belt with a rubber belt. Drive pulleys that are excessively worn will be replaced. These repairs will be performed free of charge. The recall began on October 15, 2014. Owners may contact Mitsubishi customer service at 1‑888‑648‑7820. Mitsubishi's number for this recall is SR-14-009.
Recall number 14V562000 · Recall details
Questions about the Mitsubishi Lancer stalling
Which Mitsubishi Lancer years have engine stalls while driving problems?
The model years with the most reports are 2009 (7 complaints), 2002 (6 complaints) and 2015 (5 complaints).
VIN decoder
See the problems and recalls for an exact car
Buying a used Mitsubishi Lancer?
Check the exact car before you pay: accidents, salvage or flood titles, odometer readings and previous owners.
Check its history