2012 Nabi 31LFW technical service bulletins
46 technical service bulletins and manufacturer communications cover the 2012 Nabi 31LFW.
Bulletins tell dealers how to fix known problems. A warranty extension means the manufacturer pays for that repair for longer.
- Technical Instruction for NABI model buses describing how to install a jumper harness to allow an upgraded...
- Various transmission related concerns and/or DTCs. In addition to following normal Workshop Manual (WSM)...
- Technical instruction for repair of chassis corrosion
- Technical Instruction to Reroute DEF Coolant Line.
- Technical Instruction to Relocate Emergency Exit Plaque.
- Rear Lower Radius Rod Maintenance
- Technical Instruction to Adjust Ride Height.
- Technical Instruction to Retrofit D4-VDL-01 Data Logger.
- Nabi: the controllers are shutting down due to engine cooling system fans failing and will replace modine...
- Technical instruction to modify steering column cosmetic cover.
- Technical instruction to add isolation seal to cng fuel line cover assembly.
- Technical instruction to inspect rear bulkhead seal.
- Technical instruction to replace exhaust cradle.
- Technical instruction to replace exterior compartment access panel hinge assemblies.
- Technical instruction to replace front bumper flat washers.
- Technical instruction to reseal side body panels.
- Technical instruction to inspect lower cove panels.
- Technical instruction to inspect for thin or uncured primer.
- Technical instruction to inspect for underbody tube cavity protection.
- Technical Instruction to Inspect Rear Bulkhead Seal.
- Technical Instruction to Replace Exhaust Cradle.
- Technical Instruction to Replace Exterior Compartment Access Panel Hinge Assemblies.
- Technical Instruction to Replace Front Bumper Flat Washers.
- Technical Instruction to Reseal Side Body Panels.
- Technical Instruction to Inspect Lower Cove Panels.
- Technical Instruction to Inspect for Thin or Uncured Primer.
- Technical Instruction to Inspect for Underbody Tube Cavity Protection.
- Technical Instruction to Modify CNG Tank Cradle Bolt.
- Technical Instruction to Remove plugs from Drain Holes in Frame.
- Technical Instruction to Replace Interior Coolant Lines Clamp.
- Technical Instruction to Install DEF Filler Neck Mounting Bracket .
- Nabi: the DEF filler nozzle fails to reach DEF filler neck and should be relocated using bracket
- Nabi: not enough support for weak aluminum p clamps for interior coolant lines and existing aluminum p...
- Technical Instruction to Replace CNG Front Cap Rubber Seal.
- Technical Instruction for Corrosion Repair.
- Technical Instruction to Remove Kneeling Sensor.
- Technical Instruction to Install Fuel Tank Flange Adapter.
- Nabi: the fuel tank, if overfilled has fuel seeping onto the top due to fuel tank flange holes not...
- Technical Instruction to Install Recovery Tank.
- Torque on Center Windshield Divider.
- Nabi: information being provided regarding the torque usage on screws securing front windshield to center...
- Nabi: a new, updated coolant recovery tank was installed to enhance serviceability for the cooling system
- Technical Instruction to Conduct Coolant Pressure Leak Test.
- Technical instruction to install fuel economy (RELS) update.
- Technical Instruction to Install Fuel Economy (RELS) Update.
- Technical Instruction to Retrofit Charge Air Cooler Closeout Hardware
VIN decoder
See the problems and recalls for an exact car
Buying a used 2012 Nabi 31LFW?
Check the exact car before you pay: accidents, salvage or flood titles, odometer readings and previous owners.
Check its history