Navistar 3400 recalls
There are 6 safety recalls on record for the Navistar 3400, covering 86,991 vehicles in total across all the models in each campaign. Newest first.
Navistar 3400 recalls by model year
All recalls
Service brakes, hydraulic: foundation components: hoses, lines/piping, and fittings
- What is wrong
- Vehicle description: heavy duty trucks built with rear leaf spring suspensions (models 4700 built with rear leaf suspensions and manufactured from december 9, through december 16, 1998; models 3400 and 3800 built with 14sbk rear leaf spring suspensions and built april 14 through may 10, 1999; and models 3400 and 3800 built with rear leaf spring suspensions and manufactured from may 10 through may 18, 1999). On vehicles where the frame to axle hose length was too long, a chafing condition exists on suspension components, which could result in hose rupture. On vehicles where the hoses are too short, a hose separation could occur with severe suspension articulation.
- Risk
- If a hose ruptures, the rear brakes will fail increasing the risk of a vehicle crash.
- Remedy
- Short hoses will be replaced and the long hoses will have a hose routing kit installed to prevent any chafing problems.
Recall number 99V262000 · Recall details
Steering: linkages: rod: relay: connecting
- What is wrong
- School, transit, or heavy duty vehicles equipped with spicer 6,000 or 8,000 lb. Front steer axles. The tie rod end can pull outboard and separate from the tie rod tube due to improper thread engagement between the male tie rod end and the female tube.
- Risk
- Separation of the tie rod end could result in loss of steering control, increasing the risk of a vehicle crash.
- Remedy
- Dealers will replace the complete tie rod assembly.
Recall number 99V033001 · Recall details
Engine and engine cooling: engine: gasoline
- What is wrong
- Vehicle description: heavy duty trucks equipped with t444e diesel engines. A fuel leak can occur because of overcrimping of the hose end fittings on the hose from the regulator to the left head and the hose from the fuel transfer pump to the regulator.
- Risk
- Fuel leakage, in the presence of an ignition source, can result in a fire.
- Remedy
- Dealers will inspect the oil hose and place an additional convoluted loom around the existing oil hose, or replace the hose assembly.
Recall number 98V291000 · Recall details
Fuel system, gasoline: fuel injection system
- What is wrong
- Vehicle description: heavy duty trucks equipped with a t444e diesel engine. The high pressure oilline for the fuel injection system that goes from the high pressure oil pump to the right cylinder head can chafe against the charge air cooler crossover pipe.
- Risk
- If this condition occurs, the hose will fail, resulting in a sudden loss of oil, causing the engine to have a sudden loss of power.
- Remedy
- Dealers will inspect the hoses and if the hose is not damaged a convoluted hose will be placed over the current hose. If the hose is damaged, it will be replaced along with the convoluted hose.
Recall number 98V289000 · Recall details
Power train: automatic transmission: lever and linkage: column shift
- What is wrong
- Vehicle description: trucks, school buses and transit buses equipped with an optional automatic transmission shift lever that includes a park brake position. The transmission shifter/park brake lever can bind before fully engaging in the park brake position causing a false park condition.
- Risk
- The vehicle can move after being placed in park increasing the risk of a crash.
- Remedy
- Dealers will install a spacer plate in the shifter and inspect for the presence of an "e" clip that detains the detent pin.
Recall number 98V119002 · Recall details
Power train: automatic transmission: lever and linkage: column shift
- What is wrong
- Vehicle description: medium and heavy duty trucks, school and transit buses built with a bendix 9x3 power apply park brake system. The cam lever of the powered apply brake can move forward, because a hole in the transmission mounting boss was drilled too deep.
- Risk
- This can allow the cam lever to become disengaged from the parking brake shoes. The operator would have no warning that the parking brake was not applied allowing the vehicle to move unexpectedly.
- Remedy
- Dealers will install shims in the drilled area of the automatic transmission park brake pivot pin hole.
Recall number 97V090001 · Recall details
Questions about the Navistar 3400 recalls
How do I check if my Navistar 3400 has an open recall?
Enter your VIN in the VIN decoder on this page to see the recalls for your exact model and year, then confirm with any dealer of the brand or the manufacturer, who can tell you whether the repair was already done on your car.
Do I have to pay for a recall repair?
No. Safety recall repairs are free at any authorized dealer of the brand, even if the car is out of warranty or you are not the first owner.
How many recalls does the Navistar 3400 have?
6, covering service brakes, hydraulic, steering and engine and engine cooling.
VIN decoder
See the problems and recalls for an exact car
Buying a used Navistar 3400?
Check the exact car before you pay: accidents, salvage or flood titles, odometer readings and previous owners.
Check its history