2021 New Flyer XE40 technical service bulletins
29 technical service bulletins and manufacturer communications cover the 2021 New Flyer XE40.
Bulletins tell dealers how to fix known problems. A warranty extension means the manufacturer pays for that repair for longer.
- Instruction to program for the addition of ESS cell minimum and maximum voltages and ESS charge current...
- A consumer notification indicating one of New Flyer's battery suppliers is exiting the market.
- This Bulletin is being issued due to New Flyer & MCI have received reports that customers are re-torquing...
- Instructions to adjust certain cantilever mounted seats and adjust them to proper height.
- This Technical Service Information Bulletin has been issued to remind customers that fill pressure must...
- Instructions to update OVHD HV charge box contactors to replace the existing GIGAVAC ones with new RINCON...
- Instruction to Service to update vehicles with ELFA 3 to provide improved BMS response to overcharging and...
- Instruction to Service for updating ESS drains, remove internal mechanism, re-install and add duckbill
- Instruction to Service for updating the battery program on certain ELFA3 buses for Improved BMS response...
- Service bulletin increasing the torque value of a joint in a double-tilt steering column spline shaft.
- Service instruction to verify welds on PEM mounts.
- Instruction to Service ITS60888 to improve sealing in the S/S HV charge box.
- Instruction to Service 60853 to rework a ground cable for the DC link distribution box.
- Instructions to Service to install upgraded ESS drain valves
- Instruction to Service to install enhanced ESS drain valves
- Instructions and PNs to install an improved Battery Thermal Management System fill decal.
- Instructions to add a secondary O-ring to certain high voltage cables for improved sealing properties.
- Some standard grade electric buses have experienced nuisance tripping of the motor inverter fuse
- On certain buses, mounting rivnuts for securing the ESS and inverter rack may have insufficient crimping
- ITS was issued to correct the orientation of HV contactors
- New Flyer has issued Technical Service Information Bulletin (TSIB) 22-08, providing for the application of...
- Technical Instruction describing how to inspect, remove and replace the side console lamp if required.
- This technical instruction describes how to replace dust covers and seal and protect the harnesses...
- This Instruction to Service describes how to remove and repalce the circuit breaker for the Valeo coolant...
- This Instruction to Service descripes the procedure to retrofit the shims behind anti-sway bar mounting...
- This Instruction to Service described the retrofit procedure for new spiral groove anti-sway bar mounting...
- This instruction to service describes how to upgrade the DICO module speed signal pull down resistor on...
- This instruction to service describes how to inspect specifically equipped vehicles for SDS Window...
- This technical service instruction describes how to remove and replace SDS Window strike pins and remove...
VIN decoder
See the problems and recalls for an exact car
Buying a used 2021 New Flyer XE40?
Check the exact car before you pay: accidents, salvage or flood titles, odometer readings and previous owners.
Check its history