Tl* the contact owns a 2005 nissan murano. While the vehicle was parked as he set in the driver's seat the back left side of the seat collapsed. He had notice before the seat collapsed that the seat was wobbly. The vehicle was taken to the dealer and he was advised that the frame of the seat was broken. The contact stated the dealer has ordered the part and he was waiting to hear back from them. He called the manufacturer and was waiting to hear back from them also. The failure and current mileage were 52,000. Updated 1/21/11 *cn updated 03/23/11
2005 Nissan Murano seats complaints
Page 8 of 16: complaints 191 to 220 of 456, newest first, as owners wrote them.
Got in vehicle and driver right seat came unattached from the floor and is still like that. Wobbles back and forth and not attached any more creating a huge safety issue. Bought the car less than a month ago and dealership not returning calls and are acting like they don't know what happened as if I am the first person to report this. There should be a recall as my seat is not attached to the car.
I purchased my 2005 nissan murano in march of 2009. In march of 2010 my drivers side seat broke. Looking under the seat the one of the metal support bars has come unwelded from the track causing the seat to lean to the left against the door. I have had a nissan vehicle since 1995 and have never had any major issues.
I was driving north on I-75 in atlanta, ga. My driver's side rear seat bracket broke. I nearly had an accident since the seat shifted and forced me to change my body position unexpectedly. I've felt/looked at the broken bracket then researched it on the internet. It appears this failure is common on my murano, however, nissan hasn't performed a recall to repair the known safety issue. What can be done now, before someone dies from an unexpected seat bracket failure?
Nissan murano drivers seat defective - while driving my murano last year, the seat weld in front broke causing the seat to lean excessively and almost causing me to have an accident as I was driving. The nissan dealer said it was a common nissan defect but since there was not a recall I would have to pay for the repair. I paid my mechanic to weld the front break and to include additional support braces. On tuesday of this week, while pulling into a parking lot at 5pm, a different seat weld in the back broke causing the seat to lean to the right while cornering left. Because of the extreme and sudden movement I lost control of the car, rolled across lanes and up onto a curb, almost taking out 4 people sitting at an outside table at the local glory days restaurant. I could not reach the brake pedal because of the angle. Luckily, I did not hurt anybody or damage anything other than possibly throwing a wheel weight off of the front right tire. From visiting many murano owner forums, I see that literally hundreds and hundreds of owners have had a similar experience with these welds breaking and have been told the same thing by their local nissan dealerships "it's out of warranty and unless a recall is put out, you're paying close to $1000 for the fix". A manufacturers or design defect that almost caused me to run over 4 people yesterday should indeed be a concern of nissan and it seems that it is not. Any help you can provide would be greatly appreciated.
2005 murano driver seat "popped" when entering car. Seat now has excessive movement up and down in right rear corner. Very unsafe condition to drive in since there seems to be no solid connection to the frame. After removing seat discovered the linkage mechanism between base rails and seat bracket had failed - stamped metal part had catastrophically failed in two locations. Failed part is integral to seat frame and cannot be replaced. Similar repairs noted on internet quoted at approximately $1000. Design constraints for the part should have exceeded the cars intended lifespan and should not be affected by normal usage. Safety of driver and occupants could be severely impacted if vehicle operated with this condition. This is a pathetic failure on any vehicle - let alone one with only 75k miles.
2005 nissan murano, driver seat, rear left seat bracket broke during normal driving conditions, causing seat to become unsafe and to sag badly in back left corner and seatbelt to sit in wrong place.
I own a 2005 nissan murano with just over 80,000 miles with power seats. The driver's side seat bracket is broken and I am told it will cost nearly $1000 to repair. This is a safety issue and a manufacturer's defect. My vehicle was not involved in a collision or other event that would cause the seat to fail.
On july 31, 2010, the driver's seat on my 2005 nissan murano made a popping sound, and suddenly started leaning to the left. A few miles later, there was another popping sound, and the seat started rocking left and right, and was very unstable. I took it to the dealer's service department today, and they told me the seat frame was broken and that it was a common problem for this 2005 nissan murano. The seat breaking unexpectedly is a serious safety problem, as it causes the seat belt to be incorrectly adjusted and can be too tight or too loose. Also, if this broke when I was driving on the freeway, I could have easily lost control of my car as the seat lurched to the left. If you do a google search for "2005 nissan murano seat frame", you can find hundreds if not thousands of complaints about this exact issue. Nissan refuses to repair the seat, even under extended warranty, and they won't issue a recall. This is a known manufacturing / mechanical defect, and it should be repaired at no cost to the vehicle owner.
2005 nissan murano drivers side seat back left weld broke.
1. Normal use and driving 2. Has failed 1 time, seat rocks everytime I turn 3. Welded a new bracket on the seat. This eventually broke as well.
Drivers car seat rattles from side to side causing difficulty when driving - serious safety hazard. Nissan murano- 2006.
On jan, 2010 the driver's side seat had failed on my 2005 nissan murano. The driver's seat frame had broken causing the seat to rock from side to side and front to back. The seat has a factory defect causing the frame to fail. There are hundreds of complaints for the 2004, 2005 2006 and 2007 nissan murano with the same failure. This is terribly dangerous and will cause loss of control and life threatening.
The front drivers seat frame broke under normal operating conditions after getting into my vehicle (I weight about 160lbs, 5'7" tall) on july 25th, 2010. I have not yet gotten this problem fixed because it is going to cost about $900 to fix it.
On july 17, 2010 the driver's side seat had failed on my 2005 nissan murano. The driver's seat frame had broken causing the seat to rock from side to side and front to back. The seat has a factory defect causing the frame to fail. There are hundreds of complaints for the 2004, 2005 2006 and 2007 nissan murano with the same failure. This is terribly dangerous and will cause loss of control and life threatening. Fortunately for me, I was driving in a parking lot and going rather slow. On july 26, 2010 I had the nissan dealership repair the seat and replaced the defective part. The cost was $471.43.
1. The events leading up to the failure. - all I did was sit on the seat and raise it to a different height. 2. The failure, how often it occurs, its consequences; and, - the metal frame broke underneath the seat resulting in the drivers seat rocking back and forth. 3. What was done to correct the failure; I.e, parts repaired or replaced (and if old part is available) nothing at this time, the dealer wants over 1,000 dollars to replace the seat frame. I'm considering welding the seat at this time.
The rear left bracket on the driver seat of my 2005 nissan murano failed suddenly while I was driving at a constant speed in a straight line. The vehicle has 44k miles on it and has had no symptoms of an impending seat failure. The failure caused the seat to swiftly rock back and to the left, causing me to lose control of the vehicle momentarily. Luckily I didn't hit anything, and I was able to regain control of the vehicle. I had my 6 month old baby in the car, and this situation put her at unacceptable risk of injury. Discussions with nissan corporate (1-800-nissan1) and the dealer have been fruitless. Both were aware that this was a known problem, with a tsb issued years ago (nissan tsb ntb05-043d). They were unsympathetic to the danger their design flaw posed to my family. Nissan offered to fix the problem, at a cost to me of $670. A safety issue like this, even explicitly mentioned in the federal safety agency list of examples of safety-related defects (seats and/or seat backs that fail unexpectedly during normal use), is absolutely unacceptable. I am completely at a loss to understand why this issue has existed for years in multiple muranos without a recall being issued. Just look at all of the other complaints listed on this site. Hundreds of them. Something needs to be done.
I just recently purchased a used 2005 murano. The car now has approximately 70,750 miles on it. As I was getting into the car to go get groceries, I felt the seat immediately rock to the rear left. I got out of the car to see what was wrong and because of the plastic near the base of the seat I wasn't able to identify, but noticed that I could lift the seat up back and forth. I didn't purchase an extended warranty which I believe wouldn't have mattered anyway from everyone's previous postings, but I cannot afford 1000$ for a repair that everyone seems to be having in the same exact place. This should be a safety hazard and one that is fixed by nissan. This isn't a radio going out or anything of the sort. The seat moves when you make turns, etc, and makes me wonder if it really was worth purchasing this car for this amount of money for this to happen 2 months later. Nissans are supposed to be fantastic cars and hold their value. So far, I am not seeing it. Please recall this defect. It shouldn't take peoples lives to be put at risk to have anything done. Look what happened with toyota?
I own a 2005 nissan murano that I bought used from carmax in 2007. I have had regular service performed by an asce certified mechanic since then. On 5/18/10 at less than 45k mi, the base of my driver seat suddenly broke one morning when I got into the car (parked in my garage). I weigh <120 lbs and was stunned. It was an obvious safety issue that could have resulted in serious injury, so I had it repaired immediately (5/20) through my regular mechanic. Total cost was $942.66 ($742.08 for the part & $127.50 for labor). I was extremely upset about being forced to pay so much for something beyond my control. Everyone agreed that it should never have happened, even my local nissan dealership. The dealership confirmed it was classified as a mechanical defect, checked recalls (none), and suggested I call nissan consumer affairs specifically to request goodwill assistance (compensation for repairs). They said since I had the repair done at an asce certified mechanic, the request should be fine. Nissan consumer affairs took my info & and established a case #6838133 on 6/9/10. I was assured I would be contacted by a regional specialist w/n 24 hours. When I did not receive a return call, I placed 5 more calls over the next several weeks. All assured me they were urgently requesting the regional specialist/supervisor to contact me. I re-contacted my local nissan dealership at that point, who then attempted to call on my behalf and seek assistance through their area representative. After the 7th call, ms. Jimenez (rude) called back to explain that nissan's policy doesn't allow compensation for repairs not handled by nissan, even though nissan employees told me differently and were calling on my behalf. I want compensation for the $942.66 I paid for a manufacturer's mechanical breakdown-seat base should not have broken- which could have caused serious injury or death to me/my passengers. Ca dca found similar 2008 complaint thru the federal safety agency dismissed b/c no one hurt badly enough?!!?
I have a 2005 nissan murano. My driver side seat just suddenly broke while I was driving. I spoke to another nissan murano owner and she told me hers did the same thing and nissan charged her $500 to replace it. I think this is a bi ridiculous that there are so many complaints about these seats and nissan hasn't recalled it.
I have a 2005 nissan murano. The bracket weld under the drive seat was snapped suddenly. The drive seat is lopsided to the left while driving. I have to insert some wood blocks underneath the seat to keep it level.
I own a 2005 nissan murano awd. The power drivers seat track has broken for no apparent reason. The problem seems to be on the left side and when I turnto the left, the seat raises up and gives you the feeling that you might tip out of the seat. The seat is also loose when entering or existing the vehicle. When I took it to the dealer to be fixed, they informed me that it would cost over $800 to fix and that it was not covered under and extended warranty. Due to the extreme cost, I cannot afford to have this fixed.
Drivers side seat frame broken, dealer refused repair while under extended warranty.
My driver side seat in my 2005 nissan murano with 57, 000 has a broken bracket. The seat tilts back and forth on the left side, which make it impossible and unsafe to drive.
Nissan murano VIN-[xxx] - driver side front seat rear frame defect my vehicle driver side rear seat frame broke on 06/19/2010 approximately around noontime. As I was driving my murano nissan and came to a stop at a stoplight, I heard a hard snap and felt a little jerk towards my left side. Unsure of what it was, I continued to drive my vehicle down the road. As I was driving my vehicle, I felt a rough thumping underneath my seat. I thought for a minute that my front driver side tire was going flat or had some kind of problem. As I drove further to find a safe place to pull over to check it, I felt my front seat sway back and forth, as I accelerated and as I was braking. I accelerated again to make sure that the swaying motion was actually happening. Again, the swaying motion (back and forth) of the front seat occurred. I looked underneath the front driver side rear seat and saw what looked like a black metal track frame supporting the seat. In the area towards the rear left side of the frame was one of four metal prongs that were broken away from the metal track frame of the seat. Knowing that this was a very unsafe issue, I looked for help to resolve the issue as soon as possible. Using the internet, I found numerous shocking complaints sites regarding nissan muranos' rear seat breakage. I contacted a local news station (3onyourside), who investigated the issue and found it to be legitimate and true. Not only was my vehicle in question about the defective part, several hundred complaints were found throughout the internet. Information redacted pursuant to the freedom of information act (foia), 5 u.s.c. 552(b)(6).
2005 nissan murano - I was driving and left side of drivers seat all of a sudden popped & sagged & I felt seat move around like it wasn't attached to base. It was very scary to drive it - I took it to the nissan dealer & they said a new seat frame would be $1300 but they could weld it for $350. My car only has 29,800 miles. Looking at all the similar complaints on the internet, I 'm wondering why nissan hasn't issued a recall for this.
Tl* the contact owns a 2005 nissan murano. The contact was driving about 20-25 MPH when the drivers side seat anchor broke. The seat began to rock and repeatly hit the driver's side door. The seat was lowered to the lowest position to stop the rocking. The dealer was notified and the vehicle was scheduled to be taken to the dealer on july 1. The manufacturer was notified and they told her there was no recall on the vehicle and gave her a report number. The failure and current mileage was 72,000.
Broken bracket on the driver's seat frame making the seat rock from side to side while vehicle is in motion.
Dangerous seat failure on my 05' nissan murano. The driver's seat frame has broken causing the seat to rock from side to side when cornering. This is terribly dangerous and will cause loss of control. The dealers are quoting a price of over $800 to repair something that should never have failed. I have investigated this problem on line and have found that some owners are having the seat welded abd that fixes the problem but nissan is not offering that low cost option because they have no mechanics that weld!!!
2005 nissan murano seat broken mount. Metal mount to seat base has sheared off under normal use causing unsafe driving condition. Seat moves voluntarily. As this appears to be a manufacturing defect through inspection of part , a $1000 replacement is unacceptable.
VIN decoder
See the problems and recalls for an exact car
Buying a used 2005 Nissan Murano?
Check the exact car before you pay: accidents, salvage or flood titles, odometer readings and previous owners.
Check its history