2019 Peterbilt 337 recalls

There are 5 safety recalls on record for the 2019 Peterbilt 337, covering 504,433 vehicles in total across all the models in each campaign. Newest first.

All recalls

Steering: critical fastenersReported April 25, 2022 · 17,641 vehicles affected

What is wrong: PACCAR Incorporated (PACCAR) is recalling certain 2018-2020 Kenworth T270, T370, T440, T470, T660, T680, T880, T800, W900, W990; and 2018-2020 Peterbilt 330, 337, 348, 365, 367, 389, 520, 567, and 579 vehicles. The Dana D-Series axle steer arm fasteners that attach the steering arm to the steering knuckle may fail.
Risk: Fastener failure can result in a loss of steering control, increasing the risk of a crash or injury.
Remedy: Dealers will replace and torque the steer arm fasteners, at no charge. Owner notification letters were mailed November 8, 2022. Owners may contact Kenworth customer service at 1‑425‑828‑5888 and Peterbilt customer service at 1‑940‑591‑4220. PACCAR's numbers for this recall are 22 PBB and 22 KWB.

Recall number 22V277000 · Recall details

Fuel system, diesel: fuel injection system: fuel railReported May 26, 2021 · 612 vehicles affected

What is wrong: PACCAR Incorporated (PACCAR) is recalling certain 2018-2021 Peterbilt 337, 348, 365, 367, 520, 567, Kenworth T270, T370, T440, T470, T800 and T880 vehicles. The sealing washer may not seat correctly in the pilot bore holes, allowing the high pressure fuel rail assembly to leak.
Risk: A fuel leak in the presence of an ignition source increases the risk of a fire.
Remedy: Dealers will inspect the rail threads and fuel lines, and replace the rail as necessary, free of charge. Owners may contact PACCAR customer service at 1‑425‑828‑5888 (Kenworth) or 1‑940‑591‑4220 (Peterbilt). PACCAR's numbers for this recall are 21KWC and 21PBD.

Recall number 21V391000 · Recall details

Service brakes, air: antilock: ABS warning lightReported April 6, 2020 · 460,515 vehicles affected

What is wrong: PACCAR Incorporated (PACCAR) is recalling certain 2008-2019 Peterbilt 330, 335, 337, 340, 348, 365, 367, 384, 386, 387, 388, 389, 567, 579 and 587 vehicles and 2008-2020 Kenworth T170, T270, T370, T660, T680, T800, T880, and W900 vehicles equipped with NAMUX Software. In the event that the Anti-lock Brake System (ABS) loses battery and/or ignition power to the controller, the dash warning light for the ABS may not illuminate to warn the driver of the loss of ABS. As such, these vehicles fail to comply with the requirements of Federal Motor Vehicle Safety Standard (FMVSS) number 121, "Air Brake Systems," and 136, "Electronic Stability Control System on Heavy Vehicles."
Risk: If the driver unknowingly operates the vehicle without the ABS functioning, there would be an increased risk of a crash.
Remedy: PACCAR will notify owners, and dealers will update the NAMUX software within the cab control module, free of charge. PACCAR issued owners an interim notification on June 4, 2020. The recall began May 26, 2020. Owners may contact Kenworth customer service at 1‑425‑828‑5888 or Peterbilt customer service at 1‑940‑591‑4220. PACCAR's number for this recall is 20pbc AND 20KWB.

Recall number 20V199000 · Recall details

Steering: columnReported August 22, 2019 · 109 vehicles affected

What is wrong: PACCAR Incorporated (PACCAR) is recalling certain 2019-2020 Peterbilt 337 and 348 vehicles. An incorrectly located weld in the steering shaft may crack and cause the lower shaft within the steering column to separate from the mating yoke.
Risk: If the steering column separates from the mating yoke, loss of steering control can occur, increasing the risk of a crash.
Remedy: PACCAR has notified owners, and dealers will inspect and replace the steering column, if necessary, free of charge. The recall began August 30, 2019. Owners may contact PACCAR customer service at 1-940-591-422. PACCAR's number for this recall is 19PBD.

Recall number 19V618000 · Recall details

Power train: clutch assemblyReported December 21, 2018 · 25,556 vehicles affected

What is wrong: PACCAR Incorporated (PACCAR) is recalling certain 2018-2019 Peterbilt 337, 348, 365, 367, 389, 567, 579 and 587 trucks and 2018-2019 Kenworth C500, T270, T370, T440, T660, T680, T800, T880 and W900 trucks equipped with automated manual transmissions. An internal component in the clutch assembly may fail, possibly resulting in unintended vehicle movement.
Risk: Unintended movement of a vehicle can increase the risk of a crash.
Remedy: PACCAR will notify owners, and dealers will update the transmission control module, free of charge. The recall began February 23, 2019. Owners may contact PACCAR customer service at 1‑940‑591‑4220. PACCAR's numbers for this recall are 18PBE and 18KWH.

Recall number 18V931000 · Recall details

Questions about the 2019 Peterbilt 337 recalls

How do I check if my 2019 Peterbilt 337 has an open recall?

Enter your VIN in the VIN decoder on this page to see the recalls for your exact model and year, then confirm with any dealer of the brand or the manufacturer, who can tell you whether the repair was already done on your car.

Do I have to pay for a recall repair?

No. Safety recall repairs are free at any authorized dealer of the brand, even if the car is out of warranty or you are not the first owner.

How many recalls does the 2019 Peterbilt 337 have?

5, covering steering, fuel system, diesel and service brakes, air.

VIN decoder

See the problems and recalls for an exact car

Buying a used 2019 Peterbilt 337?

Check the exact car before you pay: accidents, salvage or flood titles, odometer readings and previous owners.

Check its history