2005 Peterbilt 379 recalls

There are 6 safety recalls on record for the 2005 Peterbilt 379, covering 32,770 vehicles in total across all the models in each campaign. Newest first.

All recalls

Equipment: other: labelsReported November 25, 2013 · 561 vehicles affected

What is wrong: Paccar Incorporated (Paccar) is recalling certain 2004-2013 Peterbilt 379, 357, 378, 367, 388, 365, 389, 385 and 386 trucks manufactured from April 3, 2003, through October 25, 2013 and equipped with tri-drive rear axles and a tag or pusher axle. The affected vehicles may be missing required information from the certification label, specifically the tag or pusher axle the gross axle weight rating, suitable tire and rim information, and recommended tire pressure information. Without this information, the vehicles do not comply with the requirements of 49 C.F.R. Part 567, "Certification."
Risk: As a result, the axles may be overloaded or the wrong tires could be installed or the tires could be improperly inflated. All of these issues increase the risk of a crash.
Remedy: Peterbilt will notify owners and dealers will inspect and replace the certification labels missing the necessary information. The recall is expected to begin in January 2014. Customers can contact Peterbilt at 1‑940‑591‑4000. Peterbilt's number for this campaign is 1113-F.

Recall number 13V593000 · Recall details

Service brakes, air: slack adjustersReported March 4, 2008 · 130 vehicles affected

What is wrong: Paccar is recalling 130 my 2005-2007 kenworth c500, t800, w900, and peterbilt models 357 and 379 tractor trailers equipped with fabco slack adjusters on sisu axles. The slack adjusters may fail as a result of a fatigue crack rendering the slack adjuster inoperative. This could reduce braking effectiveness.
Risk: Reduction in braking capacity could increase the risk of a crash.
Remedy: Dealers will inspect and replace the slack adjusters free of charge. The recall began on march 21, 2008. Owners may contact kenworth at 1‑425‑828‑5440 and peterbilt at 1‑940‑591‑4196.

Recall number 08V099000 · Recall details

Service brakes, airReported February 12, 2007 · 18 vehicles affected

What is wrong: On certain non-ABS equipped trucks, an air hose between the tractor protection valve and the back of the cab bulkhead was omitted.
Risk: The absence of this air hose could adversely affect the drive axle brake performance while a trailer is being pulled, resulting in longer stopping distances, increasing the risk of a crash.
Remedy: Peterbilt will inspect the air hose plumbing of the drive axle brake system and make the necessary repairs. The recall began on february 22, 2007. Owners may contact peterbilt at 1‑940‑591‑4196.

Recall number 07V044000 · Recall details

EquipmentReported July 13, 2006 · 40 vehicles affected

What is wrong: On certain trucks, when using a cummins electronic icon service tool 2.2, an unintended engine start will occur.
Risk: Given the purpose and functionality of this service tool, this series of events would only occur in a service facility and could pose a hazard if the truck were to unexpectedly move or the engine to start without any warning, possibly causing personal injury.
Remedy: Cummins is conducting this recall (please see 06e063000) and will replace the icon service tool 2.2 with a new icon service tool 2.3 free of charge. Owners may contact cummins at 1‑800‑343‑7357 or peterbilt at 1‑940‑591‑4201.

Recall number 06V251000 · Recall details

Engine and engine coolingReported December 22, 2005 · 30,995 vehicles affected

What is wrong: On certain tractors equipped with caterpillar diesel engines, the variable valve actuation oil line may wear against the sharp edge of the cylinder head if not positioned correctly.
Risk: The oil line may be cut on the cylinder head causing an oil leak and a possible fire.
Remedy: Caterpillar, in conjunction with paccar, will be conducting the owner notification and remedy for this campaign free of charge. Owners may call caterpillar at 309‑675‑6496, kenworth at 425‑828‑5440, or peterbilt at 940‑591‑4201.

Recall number 05V570000 · Recall details

SuspensionReported April 28, 2005 · 1,026 vehicles affected

What is wrong: On certain heavy duty class 8 trucks, the suspension has transverse beam castings that may fracture under normal loads. If a casting breaks when the vehicle is traveling on a roadway there is the potential for pieces of the casting to become projectiles and the suspension's transverse beam may drop down low enough to contact the road surface.
Risk: This could cause sparks that could potentially ignite and cause a fire.
Remedy: Dealers will inspect and replace the defective transverse beam assemblies free of charge. The recall began on june 10, 2005, with letters being mailed to peterbilt owners; and on june 17, 2005, for kenworth owners. Owners may contact peterbilt at 940‑591‑4201 or kenworth at 425‑828‑5440.

Recall number 05V189000 · Recall details

Questions about the 2005 Peterbilt 379 recalls

How do I check if my 2005 Peterbilt 379 has an open recall?

Enter your VIN in the VIN decoder on this page to see the recalls for your exact model and year, then confirm with any dealer of the brand or the manufacturer, who can tell you whether the repair was already done on your car.

Do I have to pay for a recall repair?

No. Safety recall repairs are free at any authorized dealer of the brand, even if the car is out of warranty or you are not the first owner.

How many recalls does the 2005 Peterbilt 379 have?

6, covering equipment, service brakes, air and engine and engine cooling.

VIN decoder

See the problems and recalls for an exact car

Buying a used 2005 Peterbilt 379?

Check the exact car before you pay: accidents, salvage or flood titles, odometer readings and previous owners.

Check its history